STM32F103ZGH6 vs STM32F103ZET6 比較
詳細な並列比較: STM32F103ZGH6 メーカー: STMicroelectronics および STM32F103ZET6 メーカー: STMicroelectronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
STMicroelectronics
STM32F103ZET6 - 72MHz Cortex-M3 MCU 512KB Flash | STMicroelectronics
STM32F103ZET6 ✓ 生産中仕様比較
| パラメータ | STM32F103ZGH6 | STM32F103ZET6 |
|---|---|---|
| ブランド | STMicroelectronics | STMicroelectronics |
| カテゴリ | Microcontrollers | Microcontrollers |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | 32-bit ARM Cortex-M3 microcontroller | — |
| Processor Core | ARM Cortex-M3 | — |
| Architecture | 32-bit RISC | — |
| Maximum CPU Frequency | 72 MHz | — |
| Flash Memory | 1 MB | — |
| Flash Organization | 1M x 8 bits | — |
| Series | STM32 F1 mainstream series | — |
| Density Class | XL-density | — |
| Supply Voltage Reference | 2.5 V or 3.3 V | — |
| パッケージ | 144-pin LQFP | LQFP-144 (20 x 20 mm) |
| 実装タイプ | Surface mount | Surface Mount |
| USB Support | Supported by STM32F103 series | — |
| CAN Support | Supported by STM32F103 series | — |
| Timer Support | 6 timers indicated in series description | — |
| ADC Support | 2 ADCs indicated in series description | — |
| Communication Interfaces | 6 communication interfaces indicated in series description | 5 USART, 3 SPI, 2 I2C, 1 CAN 2.0B, 1 USB 2.0 FS, 1 SDIO |
| SRAM Capacity | [DATA_NEEDED: SRAM capacity] | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | — |
| GPIO Count | [DATA_NEEDED: GPIO count] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | Compliant |
| Core Processor | — | ARM Cortex-M3 32-bit RISC |
| 最大クロック周波数 | — | 72 MHz |
| Core Performance | — | 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Program Memory Size | — | 512 KB Flash |
| SRAM Size | — | 64 KB |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Number of GPIOs | — | 112 |
| ADC Resolution | — | 12-bit, 3 ADCs, up to 21 channels |
| DAC Resolution | — | 12-bit, 2 channels |
| DMA Channels | — | 12 |
| Timers | — | Advanced-control, general-purpose and basic timers plus RTC |
| 動作温度 | — | -40C to +85C |
| Debug Interface | — | JTAG and Serial Wire Debug (SWD) |
| Boot Sources | — | Flash, system memory, or SRAM |