TAS5711PHP vs TAS5727PHP 比較
詳細な並列比較: TAS5711PHP メーカー: Texas Instruments および TAS5727PHP メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
TAS5711PHP - 20W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)
TAS5711PHP ✓ 生産中仕様比較
| パラメータ | TAS5711PHP | TAS5727PHP |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Digital audio power amplifier | Digital-input Class-D stereo audio power amplifier |
| Amplifier Class | Class D | — |
| Rated Output Power | 20 W | — |
| PVDD Operating Range | 8 V to 26 V | — |
| Maximum Efficiency | 90% | — |
| Channel Configuration | 2-channel stereo, 2.1 mode or quad configuration | 2-channel stereo |
| Output Topology | Bridge-tied speaker drive | Class-D, bridge-tied-load |
| Digital Audio Input | Serial digital input | Yes |
| Input Data Rate | Wide range supported by device family | — |
| Audio Processing | EQ and DRC | — |
| Filter Mode Support | AD and BD filter modes | — |
| Signal-to-Noise Ratio | 106 dB A-weighted | — |
| パッケージ | 48-pin HTQFP, 7 mm x 7 mm | 48-pin HTQFP (PHP), 7 mm x 7 mm |
| Exposed Thermal Pad | 48-pin HTQFP EP | — |
| 実装タイプ | Surface mount | Surface mount |
| ライフサイクル状態 | Active | — |
| Compliance Status | Not specified in supplied verified data | — |
| Output Power | — | 25 W |
| Power Supply Voltage Range | — | 8 V to 26 V |
| Demonstrated Output Condition | — | 25 W into 8 ohm from a 20 V supply |
| Supported Load Configuration | — | 4 ohm load in bridge-tied-load configuration |
| Signal Processing | — | Programmable speaker EQ and DRC |
| Output Stage | — | Low-RDS(ON) Class-D output |
| Input Format | — | Digital audio serial data |
| Channel Routing | — | Programmable routing of up to two discrete audio channels |
| RoHS ステータス | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |