TMP816PWR vs DRV8886PWPR 比較

詳細な並列比較: TMP816PWR メーカー: Texas Instruments および DRV8886PWPR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
TMP816PWR TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR ✓ 生産中
Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ 生産中

仕様比較

パラメータ TMP816PWR DRV8886PWPR
ブランド Texas Instruments Texas Instruments
カテゴリ Motor Drivers Motor Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $0.39 $1.52
トポロジー Single-phase full-wave BLDC fan predriver —
Supply Voltage (VCC) 6 V to 16 V —
Maximum Supply Voltage 18 V —
Load Voltage 10 V —
Output Current 20 mA (gate drive to external PNP+NMOS) —
出力数 1 (pre-driver output pair) —
Current Limit Threshold Adjustable (external resistor) —
動作温度範囲 -30 °C to +95 °C -40 C to +125 C
Control Input PWM speed command —
Tachometer Output FG (frequency-generator) signal —
External Power Stage PNP + N-channel MOSFET pair —
Protection Features Thermal shutdown, adjustable current limit, lock-rotor protection UVLO, OCP, TSD, open-load detect, charge-pump UV
パッケージ 20-pin TSSOP (PW), 4.40 mm width HTSSOP-24 (PWP) with PowerPAD
実装タイプ Surface Mount Surface Mount
MSLレベル 1 (unlimited floor life at <30 °C / 85 % RH) —
RoHS ステータス Compliant Compliant
Lead-Free Yes —
Drive Method Full-wave, sensored (Hall-element input) —
Motor Type — Bipolar stepper (2-phase)
Number of Full H-Bridges — 2
Operating Supply Voltage (VM) — 8 V to 37 V
Absolute Maximum VM — 40 V
Full-Scale Output Current (per phase) — 2 A
RMS Output Current — 1.4 A (24 V, TA = 25 C, PCB-dependent)
Peak Output Current — 3 A
HS + LS On-Resistance (RDSon) — 550 mOhm
Microstepping Levels — Up to 1/16 step
Control Interface — STEP / DIR
Current Sensing — Internal (no external sense resistor)
Decay Modes — 8 configurable modes including Smart Tune
PWM Chopping Frequency — Up to 50 kHz
Sleep Current — 20 uA (typical)
Logic Supply Voltage (VINT) — 3 V to 5.5 V
Fault Output — nFAULT (active-low, open-drain)
AEC-Q100 Qualified — No (use DRV8886ATPWP for automotive)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼