WSM-BL241-ADA-008 vs WSM-BL241-ADA-008DK 比較
詳細な並列比較: WSM-BL241-ADA-008 メーカー: Murata Manufacturing および WSM-BL241-ADA-008DK メーカー: Murata Manufacturing。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Murata Manufacturing
WSM-BL241-ADA-008 - BLE 5.0 Module, nRF52832, 3.5dBm | Murata
WSM-BL241-ADA-008 ✓ 生産中Murata Manufacturing
WSM-BL241-ADA-008DK - BLE 5 Dev Kit for nRF52832 | Murata
WSM-BL241-ADA-008DK ✓ 生産中仕様比較
| パラメータ | WSM-BL241-ADA-008 | WSM-BL241-ADA-008DK |
|---|---|---|
| ブランド | Murata Manufacturing | Murata Manufacturing |
| カテゴリ | RF Modules | RF Modules |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $6.10 | $10.85 |
| Protocol | Bluetooth 5.0 (BLE) | — |
| Frequency Band | 2.4 GHz ISM (2402-2480 MHz) | 2.4 GHz ISM |
| Integrated IC | Nordic nRF52832 | — |
| Core | ARM Cortex-M4 | — |
| RAM | 64 KB | 64 KB |
| Flash | 512 KB | — |
| 電源電圧 | 1.7 V to 3.6 V | [DATA_NEEDED: supply voltage] |
| TX Output Power | 3.5 dBm | — |
| RX Sensitivity | -93 dBm at 1 Mbps | — |
| PHY Data Rate | 1 Mbps (BLE 5.0 2 Mbps / 500 kbps / 125 kbps supported by IC) | — |
| Antenna | Integrated trace antenna | Integrated PCB trace + U.FL connector for conducted RF testing |
| 実装タイプ | Surface Mount | Surface Mount (development board with headers) |
| Module Family | MBN52832 | — |
| RoHS ステータス | Compliant | Compliant |
| 動作温度 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Manufacturer | — | Murata Manufacturing Co., Ltd. |
| Kit Type | — | Bluetooth Low Energy Evaluation / Development Kit |
| Underlying Module | — | MBN52832 (WSM-BL241-ADA-008) |
| Wireless Protocol | — | Bluetooth 5.x (BLE), Bluetooth v5.0 |
| Integrated SoC | — | Nordic nRF52832 |
| CPU Core | — | ARM Cortex-M4 with FPU |
| Flash Memory | — | 512 KB |
| インターフェース | — | USB (power/programming), GPIO headers, U.FL RF |
| Supported SDK | — | Nordic nRF52 SDK |
| Country of Origin | — | [DATA_NEEDED: COO] |
| Kit Contents | — | Development board (the bare WSM-BL241-ADA-008 module soldered onto the carrier PCB) |