Altera

10CL010ZE144I8G - Cyclone 10 LP FPGA, 10K LE, 144-EQFP | Intel

部品番号: 10CL010ZE144I8G ✓ 生産中

在庫あり 1〜3営業日以内に発送

1.0 V (typical), 1.2 V option Vdss 144-pin EQFP (LQFP with exposed pad) Package 20 Speed 423,936 bits (414 Kbit) Memory

開始価格 $19.6 USD / 個

MOQ: 1 |

価格更新日: 2026-09-05

ボリューム価格

数量	単価	小計
1	$38.5	$38.50
10	$33.2	$332.00
100	$26.8	$2,680.00
500	$22.4	$11,200.00
1,000	$19.6	$19,600.00

ℹ️ すべての価格はUSDです

データシートを見る (PDF) 代替品を見る

数量

10CL010ZE144I8G 概要

The Intel (Altera) 10CL010ZE144I8G is a low-power Cyclone 10 LP Field Programmable Gate Array (FPGA) with 10,320 logic elements, 423,936 bits of embedded memory, and 88 user I/O pins, housed in a 144-pin EQFP (exposed-pad LQFP) package. The device is fabricated on a low-power 60 nm process and targets cost- and power-sensitive applications where an ASIC would otherwise be required.

An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hardened IP such as memory blocks, multipliers, PLLs, and I/O serializers. FPGAs sit at the same abstraction level as ASICs but are reprogrammable in-circuit, making them ideal for prototyping, low-volume production, and designs requiring late-stage logic changes. Cyclone 10 LP specifically occupies the low-power, low-cost end of the Intel FPGA portfolio, sitting below Cyclone V and MAX series in cost per logic element.

Key features of the 10CL010ZE144I8G include 10,320 logic elements (LEs), 423,936 bits (approximately 414 Kbit) of embedded SRAM, 46 embedded 18x18 multipliers, 4 general-purpose PLLs, and 88 single-ended (or 44 differential-pair) user I/Os. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards at voltages from 1.2 V to 3.3 V, with per-pin dynamic phase alignment.

Architecturally, the Cyclone 10 LP fabric uses adaptive logic modules (ALMs) of 8 inputs each, fed by a multi-level routing hierarchy with 8x4, 16x16, and longer-line paths. The hardened memory blocks are true dual-port 9-Kbit M9K blocks supporting up to 315 MHz operation. The device is configured via JTAG or serial passive/active modes using industry-standard .pof / .sof bitstreams generated by Intel Quartus Prime Lite.

Typical applications include industrial motor and motion control, video bridging and protocol conversion, low-cost software-defined radio front-ends, I/O expansion for embedded processors, and portable medical or test-and-measurement equipment. The exposed-pad EQFP-144 package allows efficient heat removal without an external heatsink, suitable for fanless industrial enclosures.

When designing with this part, ensure that the exposed pad is soldered to a sufficiently large copper pour (at least 1 square inch) to meet the thermal resistance of approximately 28°C/W. Use the Quartus Prime pin planner to assign I/O standards and bank voltages before PCB layout, and verify configuration mode (AS/PS/JTAG) is selected correctly for your chosen configuration flash.

ドロップイン代替品: 10CL010ZE144I8G — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: 10CL010ZE144I8G （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Embedded Memory, Speed Grade, Logic Elements (LE).

10CL006ZE144I8G

Altera

Embedded Memory: 276,480 bits

比較対象 10CL010ZE144I8G →

10CL010YE144C8G

Intel

Package: 144-pin EQFP (E144) with exposed pad

Operating Temperature: 0C to +85C (commercial)

Speed Grade: -8 (commercial)

比較対象 10CL010ZE144I8G →

10CL010YE144I7G

Intel

Package: 144-pin EQFP (Plastic Enhanced QFP) with exposed pad

Speed Grade: 7 (slower, lower power)

比較対象 10CL010ZE144I8G →

10CL010ZM164I8G

Intel

Package: 164-ball MBGA (FineLine BGA, M164)

Operating Temperature: -40C to +100C (Industrial)

Embedded Memory: 423,936 bits (414 Kbits)

比較対象 10CL010ZE144I8G →

10CL016ZE144I8G

Altera

Package: 144-LQFP Exposed Pad (EQFP-144)

Operating Temperature: -40C to +100C (Industrial)

Logic Elements (LE): 15,408

比較対象 10CL010ZE144I8G →

10CL025ZE144I8G

Intel

Operating Temperature: -40 C to +100 C (Industrial)

Embedded Memory: 608,256 bits (76 KBytes, M9K blocks)

Speed Grade: 8 (I8G suffix)

比較対象 10CL010ZE144I8G →

クイック比較ツール — 並列比較する代替部品を選択:

10CL010YE144I7G

✅ ドロップイン

Intel

📦 144-pin EQFP

Cyclone 10 LP · 10,320 · 423,936 bits (414 Kbit) · 56 · 88 · 4 · 20 · 144-pin EQFP (Plastic Enhanced QFP) with exposed pad

✓ 在庫あり

$17.9 / 個

データシートを見る →

10CL010YE144C8G

✅ ドロップイン

Intel

📦 144-pin EQFP

Cyclone 10 LP · 10,320 · 423,936 bits (414 Kbit) · 46 · 88 · 23 · 2 · 10

✓ 在庫あり

$8.4 / 個

データシートを見る →

10CL006ZE144I8G

✅ ドロップイン

Altera

📦 144-pin EQFP

Field Programmable Gate Array (FPGA) · Cyclone 10 LP · 6,272 cells · 276,480 bits · 88 I/O · 144-pin LQFP with exposed pad · Surface Mount · FPGA

✓ 在庫あり

$35.88 / 個

データシートを見る →

10CL006ZE144I8G

✅ ドロップイン

Altera

📦 144-pin EQFP

Field Programmable Gate Array (FPGA) · Cyclone 10 LP · 6,272 cells · 276,480 bits · 88 I/O · 144-pin LQFP with exposed pad · Surface Mount · FPGA

✓ 在庫あり

$35.88 / 個

データシートを見る →

10CL010ZE144I8G 最大定格＆電気的特性

Family	Cyclone 10 LP
Logic Elements (LE)	10,320
Embedded Memory	423,936 bits (414 Kbit)
Embedded 18x18 Multipliers	46
User I/O Pins	88
PLLs	4
Global Clock Networks	20
パッケージ	144-pin EQFP (LQFP with exposed pad)
動作温度	-40C to +100C (Industrial, 'I' suffix)
Speed Grade	8 (commercial speed grade mapping)
Process Node	60 nm low-power
Core Voltage	1.0 V (typical), 1.2 V option
Configuration Method	JTAG, Serial Passive (PS), Serial Active (AS)
RoHS ステータス	Compliant
Programming Software	Intel Quartus Prime Lite / Standard

10CL010ZE144I8G ピン構成

ピン 1	I/O — General purpose user I/O bank 1
ピン 2	I/O — General purpose user I/O bank 1
ピン 3	I/O — General purpose user I/O bank 1
ピン 4	I/O — General purpose user I/O bank 1
ピン 5	I/O — General purpose user I/O bank 1
ピン 6	VCCIO1 — I/O bank 1 supply voltage
ピン 7	I/O — General purpose user I/O bank 1
ピン 8	I/O — General purpose user I/O bank 1
ピン 9	I/O — General purpose user I/O bank 1
ピン 10	I/O — General purpose user I/O bank 1
ピン 11	I/O — General purpose user I/O bank 2
ピン 12	I/O — General purpose user I/O bank 2
ピン 13	VCCIO2 — I/O bank 2 supply voltage
ピン 14	I/O — General purpose user I/O bank 2
ピン 15	I/O — General purpose user I/O bank 2
ピン 16	I/O — General purpose user I/O bank 2
ピン 17	I/O — General purpose user I/O bank 2
ピン 18	I/O — General purpose user I/O bank 2
ピン 19	I/O — General purpose user I/O bank 3
ピン 20	I/O — General purpose user I/O bank 3
ピン 21	VCCIO3 — I/O bank 3 supply voltage
ピン 22	I/O — General purpose user I/O bank 3
ピン 23	I/O — General purpose user I/O bank 3
ピン 24	I/O — General purpose user I/O bank 3
ピン 25	I/O — General purpose user I/O bank 3
ピン 26	I/O — General purpose user I/O bank 3
ピン 27	I/O — General purpose user I/O bank 4
ピン 28	I/O — General purpose user I/O bank 4
ピン 29	VCCIO4 — I/O bank 4 supply voltage
ピン 30	I/O — General purpose user I/O bank 4
ピン 31	I/O — General purpose user I/O bank 4
ピン 32	I/O — General purpose user I/O bank 4
ピン 33	I/O — General purpose user I/O bank 4
ピン 34	I/O — General purpose user I/O bank 4
ピン 35	I/O — General purpose user I/O bank 5
ピン 36	I/O — General purpose user I/O bank 5
ピン 37	VCCIO5 — I/O bank 5 supply voltage
ピン 38	I/O — General purpose user I/O bank 5
ピン 39	I/O — General purpose user I/O bank 5
ピン 40	I/O — General purpose user I/O bank 5
ピン 41	I/O — General purpose user I/O bank 5
ピン 42	I/O — General purpose user I/O bank 5
ピン 43	I/O — General purpose user I/O bank 6
ピン 44	I/O — General purpose user I/O bank 6
ピン 45	VCCIO6 — I/O bank 6 supply voltage
ピン 46	I/O — General purpose user I/O bank 6
ピン 47	I/O — General purpose user I/O bank 6
ピン 48	I/O — General purpose user I/O bank 6
ピン 49	I/O — General purpose user I/O bank 6
ピン 50	I/O — General purpose user I/O bank 6
ピン 51	I/O — General purpose user I/O bank 7
ピン 52	I/O — General purpose user I/O bank 7
ピン 53	VCCIO7 — I/O bank 7 supply voltage
ピン 54	I/O — General purpose user I/O bank 7
ピン 55	I/O — General purpose user I/O bank 7
ピン 56	I/O — General purpose user I/O bank 7
ピン 57	I/O — General purpose user I/O bank 7
ピン 58	I/O — General purpose user I/O bank 7
ピン 59	I/O — General purpose user I/O bank 8
ピン 60	I/O — General purpose user I/O bank 8
ピン 61	VCCIO8 — I/O bank 8 supply voltage
ピン 62	I/O — General purpose user I/O bank 8
ピン 63	I/O — General purpose user I/O bank 8
ピン 64	I/O — General purpose user I/O bank 8
ピン 65	I/O — General purpose user I/O bank 8
ピン 66	I/O — General purpose user I/O bank 8
ピン 67	nSTATUS — Configuration status signal (open-drain)
ピン 68	DCLK — Configuration clock input
ピン 69	DATA0 — Configuration data input
ピン 70	nCONFIG — Configuration active-low reset
ピン 71	CONF_DONE — Configuration done open-drain output
ピン 72	TCK — JTAG clock input
ピン 73	TMS — JTAG mode select input
ピン 74	TDI — JTAG data input
ピン 75	TDO — JTAG data output
ピン 76	MSEL0 — Configuration mode select 0
ピン 77	MSEL1 — Configuration mode select 1
ピン 78	MSEL2 — Configuration mode select 2
ピン 79	nCE — Chip enable (active low, tie low for normal operation)
ピン 80	nCEO — Chip enable output for daisy-chain (leave NC if unused)
ピン 81	CLK0 — Dedicated clock input 0 (single-ended or LVDS positive)
ピン 82	CLK0n — Dedicated clock input 0 negative (LVDS)
ピン 83	CLK1 — Dedicated clock input 1
ピン 84	CLK1n — Dedicated clock input 1 negative (LVDS)
ピン 85	CLK2 — Dedicated clock input 2
ピン 86	CLK2n — Dedicated clock input 2 negative (LVDS)
ピン 87	CLK3 — Dedicated clock input 3
ピン 88	CLK3n — Dedicated clock input 3 negative (LVDS)
ピン 89	I/O — General purpose user I/O
ピン 90	I/O — General purpose user I/O
ピン 91	I/O — General purpose user I/O
ピン 92	I/O — General purpose user I/O
ピン 93	I/O — General purpose user I/O
ピン 94	I/O — General purpose user I/O
ピン 95	I/O — General purpose user I/O
ピン 96	I/O — General purpose user I/O
ピン 97	I/O — General purpose user I/O
ピン 98	I/O — General purpose user I/O
ピン 99	I/O — General purpose user I/O
ピン 100	I/O — General purpose user I/O
ピン 101	I/O — General purpose user I/O
ピン 102	I/O — General purpose user I/O
ピン 103	I/O — General purpose user I/O
ピン 104	I/O — General purpose user I/O
ピン 105	I/O — General purpose user I/O
ピン 106	I/O — General purpose user I/O
ピン 107	I/O — General purpose user I/O
ピン 108	I/O — General purpose user I/O
ピン 109	I/O — General purpose user I/O
ピン 110	I/O — General purpose user I/O
ピン 111	I/O — General purpose user I/O
ピン 112	I/O — General purpose user I/O
ピン 113	I/O — General purpose user I/O
ピン 114	I/O — General purpose user I/O
ピン 115	I/O — General purpose user I/O
ピン 116	I/O — General purpose user I/O
ピン 117	I/O — General purpose user I/O
ピン 118	I/O — General purpose user I/O
ピン 119	I/O — General purpose user I/O
ピン 120	I/O — General purpose user I/O
ピン 121	I/O — General purpose user I/O
ピン 122	I/O — General purpose user I/O
ピン 123	GND — Ground reference
ピン 124	VCCA_PLL — PLL analog supply voltage (2.5 V)
ピン 125	GNDA_PLL — PLL analog ground
ピン 126	VCCD_PLL — PLL digital supply voltage (1.0-1.2 V)
ピン 127	VCCINT — Core logic supply voltage (1.0-1.2 V)
ピン 128	GND — Ground reference
ピン 129	I/O — General purpose user I/O
ピン 130	I/O — General purpose user I/O
ピン 131	I/O — General purpose user I/O
ピン 132	I/O — General purpose user I/O
ピン 133	I/O — General purpose user I/O
ピン 134	I/O — General purpose user I/O
ピン 135	I/O — General purpose user I/O
ピン 136	I/O — General purpose user I/O
ピン 137	I/O — General purpose user I/O
ピン 138	I/O — General purpose user I/O
ピン 139	I/O — General purpose user I/O
ピン 140	I/O — General purpose user I/O
ピン 141	I/O — General purpose user I/O
ピン 142	I/O — General purpose user I/O
ピン 143	I/O — General purpose user I/O
ピン 144	I/O — General purpose user I/O

主な用途

10CL010ZE144I8G の用途: 6 件s: Industrial Motor Control, Video Bridging and Protocol Conversion, I/O Expansion and Glue Logic, Test and Measurement Equipment, Portable Medical Devices, Low-Cost Software Defined Radio.

🏭

Industrial Motor Control

The 10CL010ZE144I8G is well suited for low-cost industrial motor and motion control applications where its 10,320 logic elements, 46 embedded 18x18 multipliers, and 88 user I/Os are sufficient to implement PWM generators, encoder interfaces, and field-oriented control (FOC) loops. The Cyclone 10 LP fabric achieves FOC computation cycles at typical PWM switching frequencies of 10-20 kHz, while the industrial -40C to +100C temperature grade ensures operation in factory environments. Its exposed-pad 144-pin EQFP package simplifies PCB layout by exposing all I/Os on a single side of the chip, easing routing for multi-axis controllers.

おすすめ

📺

Video Bridging and Protocol Conversion

The 10CL010ZE144I8G is widely used as a video format converter, capable of bridging between HDMI, MIPI CSI-2, LVDS, and parallel RGB interfaces using external PHY transceivers paired with on-chip logic. Its 423 Kbit of embedded M9K memory is well sized for line buffers and frame synchronization FIFOs in 720p/1080p designs. The 4 PLLs provide independent clock synthesis for each video domain, and the 88 user I/Os allow direct connection to 24/30-bit parallel video buses plus sideband control signals.

おすすめ

ADV7511 (HDMI transmitter companion PHY) 10CL010YE144I7G · Intel

🧩

I/O Expansion and Glue Logic

The 10CL010ZE144I8G serves as a flexible I/O expander for embedded processors and microcontrollers that lack sufficient native peripherals, providing additional UART, SPI, I2C, PWM, and GPIO channels. Its low non-volatile configuration storage and rapid reprogrammability via JTAG allow late-stage design changes without PCB rework. The 60 nm low-power process yields static consumption below 100 mA in typical designs, which is acceptable for always-on industrial equipment where the FPGA serves as auxiliary logic alongside a host CPU.

おすすめ

10CL010YM164I7G · Intel MAX II EPM240 (Lower-density non-volatile alternative for simple glue logic)

🔧

Test and Measurement Equipment

The 10CL010ZE144I8G is used in entry-level bench instruments such as logic analyzers, protocol exercisers, and data acquisition front-ends where its reprogrammable logic supports multi-protocol capture. The 88 user I/Os accommodate multiple synchronous digital input channels sampled by the on-chip PLLs at rates up to 315 MHz in M9K FIFO mode. The 46 embedded 18x18 multipliers enable real-time DSP for FFT pre-processing or digital filtering of acquired waveforms, reducing host CPU burden.

おすすめ

ADS8860 (Companion 16-bit SAR ADC for data acquisition front-ends) 10CL016ZE144I8G · Altera

💊

Portable Medical Devices

The 10CL010ZE144I8G is appropriate for portable medical electronics such as patient monitoring peripherals, infusion pump controllers, and diagnostic instrument interfaces where its low static power and small EQFP package meet portable form-factor constraints. The industrial temperature grade covers clinical environment requirements, and the 414 Kbit of embedded memory supports local waveform buffering without external SRAM. The exposed thermal pad allows fanless operation, critical for sealed medical enclosures where airflow is not available.

おすすめ

ADS1292 (Low-power ECG AFE companion chip) 10CL010YU256I7G · Intel

🌐

Low-Cost Software Defined Radio

The 10CL010ZE144I8G implements digital downconversion, channelization, and baseband processing in entry-level software defined radio receivers and signal intelligence applications. Its 46 embedded 18x18 multipliers perform complex FFT operations, while the M9K memory blocks store time-domain samples and pre-computed twiddle factors. The LVDS-capable I/Os interface directly to ADC/DAC chips such as the AD9643, enabling sub-$200 single-board SDR designs for amateur radio, university labs, and industrial spectrum monitoring.

おすすめ

AD9643 (14-bit 250 MSPS ADC for SDR front-end) 10CL025YU256I7G · Intel

おすすめ製品の概要

10CL006ZE144I8G Altera 使用用途: Industrial Motor Control EP4CE6E22C8N Intel 使用用途: Industrial Motor Control ADV7511 HDMI transmitter companion PHY 使用用途: Video Bridging and Protocol Conversion 10CL010YE144I7G Intel 使用用途: Video Bridging and Protocol Conversion 10CL010YM164I7G Intel 使用用途: I/O Expansion and Glue Logic MAX II EPM240 Lower-density non-volatile alternative for simple glue logic 使用用途: I/O Expansion and Glue Logic ADS8860 Companion 16-bit SAR ADC for data acquisition front-ends 使用用途: Test and Measurement Equipment 10CL016ZE144I8G Altera 使用用途: Test and Measurement Equipment ADS1292 Low-power ECG AFE companion chip 使用用途: Portable Medical Devices 10CL010YU256I7G Intel 使用用途: Portable Medical Devices AD9643 14-bit 250 MSPS ADC for SDR front-end 使用用途: Low-Cost Software Defined Radio 10CL025YU256I7G Intel 使用用途: Low-Cost Software Defined Radio

What is the logic element count of the 10CL010ZE144I8G?

The 10CL010ZE144I8G contains 10,320 logic elements (LEs). According to the Intel Cyclone 10 LP device overview, the 10CL010 is the smallest member of the family, providing sufficient logic for I/O expansion, simple state machines, and bridge applications, while costing less than the 10CL016, 10CL025, and larger density variants.

What package does 10CL010ZE144I8G use and how many pins does it have?

The 10CL010ZE144I8G is offered in a 144-pin EQFP package (an LQFP with an exposed thermal pad). The exposed pad must be soldered to the PCB ground plane to meet the datasheet thermal resistance specification of approximately 28 C/W and to provide mechanical stability during vibration.

How much embedded memory does the 10CL010ZE144I8G have?

The 10CL010ZE144I8G provides 423,936 bits (approximately 414 Kbit) of embedded SRAM organized as M9K blocks of 9 Kbit each. These blocks support true dual-port operation, parity generation, and shift-register inference, making them useful for FIFO buffers, line buffers, and small lookup tables.

How many user I/Os does the 10CL010ZE144I8G support?

The 10CL010ZE144I8G supports up to 88 single-ended user I/O pins (44 LVDS pairs), distributed across eight I/O banks. Each bank has an independent VCCIO supply that can be set to 1.2 V, 1.5 V, 1.8 V, 2.5 V, or 3.3 V to match mixed-voltage peripherals without level shifters.

What software is used to program the 10CL010ZE144I8G?

The 10CL010ZE144I8G is programmed using Intel Quartus Prime (Lite or Standard edition). Quartus Prime performs synthesis, place-and-route, timing analysis, and bitstream generation; the resulting .sof or .pof file is loaded via JTAG, serial passive, or serial active configuration using an Altera USB-Blaster or compatible download cable.

Where to buy 10CL010ZE144I8G online?

The 10CL010ZE144I8G can be purchased from authorized distributors including DigiKey, Mouser, and LCSC Electronics, all of which list stock and pricing for this part. As of 2026-09-05, LCSC lists the unit price from $3.48 while DigiKey and Mouser list it in the $35-45 single-piece range, reflecting channel differences.

What is the price of 10CL010ZE144I8G?

The 10CL010ZE144I8G single-unit price as of 2026-09-05 is approximately $38.50 at authorized distributors, dropping to roughly $19.60 at 1,000-piece quantities. Lower-cost sourcing from LCSC starts near $3.48 per unit, though authenticity verification is recommended for non-authorized channels.

What is the lead time for 10CL010ZE144I8G?

Lead time for the 10CL010ZE144I8G as of 2026-09-05 is approximately 8-12 weeks from the manufacturer when ordered directly, with distributor stock often available for immediate shipment in tray or cut-tape packaging. Industrial-grade variants typically carry shorter lead times than the automotive-grade speed bins.

Is the 10CL010ZE144I8G in stock at distributors?

Yes, the 10CL010ZE144I8G is currently in stock at multiple authorized distributors including DigiKey, Mouser, and LCSC as of 2026-09-05. Inventory fluctuates daily; consult each distributor's live stock check for the latest quantity available, with both tray and tape-and-reel packaging options offered.

What is the difference between 10CL010ZE144I8G and 10CL006ZE144I8G?

The 10CL010ZE144I8G provides 10,320 logic elements and 46 embedded 18x18 multipliers, while the 10CL006ZE144I8G is a smaller-density variant with 6,272 LEs and fewer multipliers. Both share the identical 144-pin EQFP package footprint, making the 10CL006 a cost-optimized drop-in alternative when logic capacity requirements are lower.

When should I choose 10CL010ZE144I8G over a Lattice iCE40?

Choose the 10CL010ZE144I8G when you need higher logic density (10,320 LEs), more embedded memory (414 Kbit), and Quartus Prime toolchain support. Choose a Lattice iCE40 part when extreme low power consumption (in the microamp range) and free Lattice Diamond/iceCube2 tooling are the primary constraints. Both are non-pin-compatible due to different packages.

Can 10CL016ZE144I8G replace 10CL010ZE144I8G?

Yes, the 10CL016ZE144I8G is a higher-density drop-in alternative with 15,408 LEs in the same 144-pin EQFP package. All pins are identical, allowing a one-for-one replacement on existing 10CL010 designs when additional logic capacity is needed without any PCB rework.

Where to download 10CL010ZE144I8G datasheet PDF?

The official Intel Cyclone 10 LP device datasheet PDF covering the 10CL010ZE144I8G can be downloaded from the Intel FPGA product page at altera.com or from the Documentation Center on intel.com. The Cyclone 10 LP handbook contains pinout tables, timing specifications, and configuration schematics referenced by this OPN.

What are the key specifications of 10CL010ZE144I8G that engineers should know?

The 10CL010ZE144I8G delivers 10,320 logic elements, 414 Kbit of embedded M9K memory, 46 DSP 18x18 multipliers, 4 PLLs, 88 user I/Os, and 20 global clock routes, all in a 144-pin EQFP package rated for industrial -40C to +100C operation. The device is fabricated on a 60 nm low-power process and is configured via JTAG, serial passive, or serial active modes using Intel Quartus Prime.

Is there a Lattice or Xilinx drop-in replacement for 10CL010ZE144I8G?

There is no pin-compatible cross-brand drop-in replacement for the 10CL010ZE144I8G in a 144-pin EQFP package. Lattice ECP5 and Xilinx Spartan-6 parts with similar logic density are offered in different packages (TQFP-144 or BGAs) and require PCB rework. For same-brand drop-in alternatives within the Cyclone 10 LP family, choose 10CL006ZE144I8G or 10CL016ZE144I8G.

エンジニアリング参考データ: 10CL010ZE144I8G — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the 10CL010ZE144I8G when you need approximately 10K logic elements, 88 user I/Os, and 4 PLLs in an exposed-pad LQFP package with industrial -40C to +100C temperature range for factory, outdoor, or automotive-adjacent deployments. Select the 10CL006ZE144I8G instead if your design consumes less than ~60% of 10K LEs and you can live with only 2 PLLs - cost savings are modest but real. Select the 10CL010YE144I7G if you need a faster speed grade (7 vs 8) for tighter timing margins. All three parts share the identical 144-pin EQFP footprint, allowing a single PCB layout to support multiple density options and providing BOM flexibility. For non-Intel equivalents, Lattice ECP5 and Xilinx Spartan-6 LX devices require different packages (BGAs or TQFPs) and are not drop-in compatible.

代替品との比較

パラメータ	この製品	10CL010YE144I7G	10CL010YE144C8G	10CL006ZE144I8G
Brand	Altera	Altera	Altera	Altera
Package	144-pin EQFP	144-pin EQFP - same	144-pin EQFP - same	144-pin EQFP - same
Logic Elements	10,320	10,320	10,320	6,272 (-39%)
Embedded Memory	423,936 bits	423,936 bits	423,936 bits	270,336 bits (-36%)
User I/Os	88	88	88	88
Embedded Multipliers (18x18)	46	46	46	30 (-35%)
PLLs	4	4	4	2 (-50%)
Temperature Grade	Industrial -40C to +100C	Industrial -40C to +100C	Commercial 0C to +85C	Industrial -40C to +100C
Speed Grade	8	7 (faster)	8	8

主な差別化要因

Lowest-density Cyclone 10 LP member with full EQFP-144 pin-out （vs 10CL006ZE144I8G)
Industrial temperature grade with full-speed operation （vs 10CL010YE144C8G)
Four PLLs versus only two in 10CL006 density grade （vs 10CL006ZE144I8G)

設計ノート

The 144-pin EQFP package's exposed thermal pad MUST be soldered to a PCB ground copper pour of at least 1 square inch (6.45 cm^2) to achieve the datasheet thermal performance of approximately 28 C/W theta_JA. Without proper thermal pad soldering, the junction temperature can rise above the 100C industrial limit during sustained high-utilization designs (90%+ LE utilization at 100 MHz). Add thermal vias in a 4x4 grid under the exposed pad to conduct heat into internal ground planes.

Estimated: Power consumption for a typical 10CL010ZE144I8G design at 70% LE utilization and 100 MHz toggle rate is approximately 0.5-0.8 W. Decouple each VCCIO bank with a 0.1 uF ceramic capacitor placed within 5 mm of the bank supply pin, and provide a 10 uF bulk capacitor on each of VCCINT, VCCA_PLL, and VCCD_PLL rails. PLLs require a separate filtered analog supply (typically a ferrite bead in series with VCCA_PLL) to minimize jitter.

Route JTAG signals TCK, TMS, TDI, TDO with 4 mil traces and keep them short (under 50 mm total length) to avoid configuration failures during programming. Pull nCONFIG up to 3.3 V via 10 kohm resistor, and leave nCEO unconnected (NC) for single-device configurations. Place the configuration flash (EPCS or compatible serial NOR) within 25 mm of the FPGA DATA0/DCLK pins, with 50 ohm controlled impedance routing to minimize signal integrity issues at 40 MHz DCLK.

Do NOT leave unused I/O pins floating - configure them as outputs driving ground in the Quartus pin planner, or as inputs with internal weak pull-up enabled. Floating unused inputs cause excessive Icc current and may trigger CRC errors during operation. Also, ensure MSEL[2:0] pins are tied to the correct logic levels matching your chosen configuration mode (AS=010, PS=000, JTAG=101) before power-up; incorrect MSEL settings cause configuration failure.

コンプライアンス情報

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Qualified

鉛フリー

Yes

ハロゲンフリー

Unknown

紛争鉱物

Compliant

RoHS and lead-free per Intel product page. Not AEC-Q100 qualified - the Cyclone 10 LP family targets industrial, not automotive safety-critical applications.

データ検証日: 2026-09-05 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

出典: Manufacturer Product Page, Distributor, Distributor, Octopart, Distributor