88NV1120 - 6Gb/s SATA SSD Controller | Marvell
部品番号: 88NV1120 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
88NV1120 概要
A DRAMless SSD controller is an integrated circuit that manages nonvolatile NAND flash without requiring an external DRAM buffer. In the storage hierarchy, it sits between the host-facing SATA interface and NAND devices, translating storage commands while coordinating flash programming, erase, wear management, error correction, and data placement. The verified material identifies 6Gb/s SATA connectivity, DRAMless operation, LDPC reliability enhancement, endurance improvement, and TLC support as the principal engineering characteristics.
The 88NV1120 targets cost-sensitive client SSD designs where interface compatibility and NAND support matter more than PCIe performance. Its 6Gb/s SATA interface aligns it with client storage platforms that use SATA connectors and protocols. Unlike the 88NV1140, however, it does not provide the X1-lane PCIe 3.0 interface described for that family member. This protocol distinction is essential during controller selection and PCB reuse because a functionally similar flash controller may require different firmware, validation, and board integration.
Typical applications include value-oriented client SSDs, small-form-factor storage products, and systems designed around SATA rather than NVMe over PCIe. The product overview specifically associates the controller family with cost-effective SSDs intended to approach hard-disk-drive affordability as NAND costs decline. System-level qualification must still confirm supported NAND types, capacities, firmware, endurance requirements, temperature behavior, and the complete SSD validation matrix.
Designers should treat SSD-controller substitution as a system-level qualification decision rather than a simple electrical swap. Host interface support, NAND firmware, ECC behavior, wear-leveling requirements, power states, package details, and validation evidence must all match. According to the Marvell product brief, the controller supports Marvell third-generation LDPC technology for reliability enhancement, endurance boost, and TLC NAND support on top of MLC NAND.
This page consolidates the verified controller overview, source documentation, storage-interface context, and application constraints for engineers evaluating an 88NV1120 SSD design. It also distinguishes verified facts from unavailable electrical, package, lifecycle, pricing, and pin-level data so procurement or design decisions are not based on unsupported assumptions.
ドロップイン代替品: 88NV1120 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエスト88NV1120 最大定格＆電気的特性
| Product Type | DRAMless NAND flash SSD controller |
| Host Interface | SATA |
| Maximum Stated SATA Data Rate | 6 Gb/s |
| External DRAM Requirement | None; DRAMless operation |
| Target Storage Class | Small-form-factor and value-line SSD markets |
| NAND Error Correction | Third-generation Marvell LDPC technology |
| MLC NAND Support | Supported |
| TLC NAND Support | Supported |
| Reliability Feature | LDPC reliability enhancement |
| Endurance Feature | LDPC-based endurance boost |
| System Usage | Client PC solid-state storage |
88NV1120 standard ピン配置ガイド
88NV1120 (standard パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: 88NV1120.
詳細は データシート をご参照ください。
主な用途
88NV1120 の用途: 6 件s: Value-Line Client SATA SSD, Small-Form-Factor SSD, SATA Laptop Storage Upgrade, Client Desktop SSD, Cost-Sensitive Entry-Level SSD, External SATA Storage Appliance.
Value-Line Client SATA SSD
The Marvell 88NV1120 fits value-oriented client SSDs that require a 6Gb/s SATA host interface and do not need NVMe over PCIe. Its DRAMless architecture can reduce the need for external memory, supporting cost-sensitive designs aimed at the small-form-factor and value-line markets identified in the product overview. Marvell third-generation LDPC technology is stated to improve reliability and endurance while supporting TLC as well as MLC NAND. Before release, validate the selected NAND densities, firmware, capacity targets, power states, thermal profile, and full client SSD qualification matrix.
おすすめ
Small-Form-Factor SSD
The 88NV1120 is intended for small-form-factor SSD products where a compact storage architecture and SATA compatibility are priorities. Its controller position between the 6Gb/s SATA host interface and NAND flash allows a finished drive to present a standard client storage interface while retaining internal flash-management functions. The verified sources do not specify the package or electrical limits, so board designers must obtain controlled hardware documentation before layout. NAND compatibility and firmware qualification remain essential even when the mechanical SSD format is established.
おすすめ
SATA Laptop Storage Upgrade
The 88NV1120 can support development of a SATA laptop SSD when the host platform exposes the standard 6Gb/s SATA interface. DRAMless operation and MLC/TLC NAND support align with cost-conscious client storage, while LDPC is intended to strengthen reliability and endurance. A production design still needs platform-specific validation for sleep states, power-loss behavior, thermal limits, capacity, command behavior, and operating-system compatibility. The controller should not be selected for an NVMe-only laptop interface without a separate protocol adapter design.
おすすめ
Client Desktop SSD
A desktop replacement SSD using SATA can be based on the 88NV1120 because the controller explicitly supports a 6Gb/s SATA interface for value-oriented storage. The architecture is aimed at reducing reliance on external DRAM while supporting both MLC and TLC NAND through Marvell's stated third-generation LDPC technology. Engineering sign-off should compare the chosen NAND against the controller's qualified list and verify drive firmware, Secure Erase behavior, power cycling, temperature monitoring, and capacity-dependent performance. Actual benchmark results cannot be inferred from the interface rate alone.
おすすめ
Cost-Sensitive Entry-Level SSD
The 88NV1120 is suited to entry-level SSD concepts where reducing external memory and targeting mainstream SATA connectivity are more important than PCIe bandwidth. The verified product overview describes a cost-effective controller strategy for value-line SSDs as NAND flash costs decline. LDPC support for MLC and TLC provides a reliability-oriented foundation, but it does not guarantee a particular endurance rating or retail price. Designers must establish those outcomes through NAND characterization, firmware tuning, validation testing, and completed drive qualification.
おすすめ
External SATA Storage Appliance
The 88NV1120 can be evaluated for an external SATA storage appliance that exposes a standard 6Gb/s SATA interface to a host. The controller manages NAND operations internally, supports stated MLC and TLC device families, and offers LDPC reliability enhancement. Implementation requires validation of hot-plug behavior, power-loss recovery, enclosure thermal conditions, cable and connector interoperability, and the appliance's storage-management expectations. Because the supplied documents do not expose package, voltage, or temperature limits, hardware implementation must use manufacturer-controlled documentation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 88NV1120 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Marvell |
| Host Interface | 6Gb/s SATA |
| Controller Architecture | DRAMless NAND flash SSD controller |
| Error Correction | Marvell third-generation LDPC |
| MLC NAND Support | Supported |
| TLC NAND Support | Supported |
| Target Market | Small-form-factor and value-line SSD markets |
主な差別化要因
- Purpose-built SATA interface for value-line SSDs （vs 88NV1140)
- DRAMless SSD-controller architecture （vs 88NV1140)
- Stated support for MLC and TLC NAND （vs Cross-brand controller search result)
設計ノート
Do not treat the 88NV1140 as a drop-in substitute for the 88NV1120. The verified distinction is the host interface: 88NV1120 targets 6Gb/s SATA, while 88NV1140 supports X1-lane PCIe 3.0 and legacy AHCI through PCIe. A shared controller-family background does not establish pin, protocol, firmware, or PCB compatibility.
The verified sources do not provide operating voltage, active current, sleep current, power states, or power-loss behavior. Do not infer those values from the 6Gb/s interface rate. Obtain the manufacturer-controlled hardware documentation and NAND power requirements, then define the SSD power tree, sequencing, reset behavior, and brownout handling before schematic capture.
Support for MLC and TLC NAND does not make every MLC or TLC device interchangeable. Qualification must check the exact NAND family, density, geometry, interface timing, error characteristics, retention, endurance, and firmware support. LDPC improves the error-correction strategy, but production acceptance still requires validation under the intended temperature, power-loss, and workload conditions.
The verified public material does not reveal the package, pin count, ball map, or recommended PCB layout. Do not start routing from archive search results or third-party controller databases. Request the current Marvell design package, reference schematic, layout guidance, NAND interface requirements, SATA routing constraints, and power-integrity recommendations before committing a PCB.
コンプライアンス情報
The supplied Marvell product brief does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not_applicable because this is a storage controller rather than an automotive-qualified device claim in the verified data.