A3P030-VQ100I - 30K Gate, 231 MHz Flash FPGA | Microchip
部品番号: A3P030-VQ100I ✓ 生産中A3P030-VQ100I 概要
A flash FPGA is a programmable-logic semiconductor that combines a configurable logic array, embedded memory, input/output resources, and nonvolatile configuration storage on one integrated circuit. Within the product hierarchy, the A3P030 belongs to the ProASIC3 family of FPGAs and CPLDs, with architecture characteristics associated with flash-based programmable logic rather than mask-programmed ASICs.
The device provides 30K equivalent gates, 330 logic elements, 77 I/O, and a 231 MHz operating frequency in a compact 100-pin TQFP package. Its flash-based architecture permits configuration updates in the field, providing a practical combination of low power, fast startup, design flexibility, and ASIC-like integration. The industrial-temperature suffix identifies the A3P030-VQ100I as an industrial configuration within the ProASIC3 family.
Technical implementation centers on a single-chip programmable logic platform with embedded flash configuration. Because configuration is retained in nonvolatile memory, the device does not require a separate boot PROM for normal operation. This simplifies board design, reduces external component count, and supports field updates. Designers should still follow the manufacturer pin-description table when assigning power, configuration, clock, and user I/O pins because the complete pin-level netlist is not reproduced on this page.
Typical uses include industrial control logic, interface bridging, protocol conversion, instrumentation, embedded signal conditioning, and compact control systems that benefit from reprogrammable logic. The 77-I/O device is particularly useful where several digital interfaces must converge on one programmable component while retaining post-deployment configuration flexibility.
PCB planning should account for the 1.5 V core supply, configuration interface requirements, decoupling, clock routing, and high-speed I/O constraints. Maintain short return paths and follow the reference-layout guidance in the manufacturer datasheet. This page combines device specifications, package details, qualified alternatives, comparison data, and practical selection guidance for engineers evaluating a TQFP-100 ProASIC3 design.
Because the FPGA combines 231 MHz performance, 77 I/O, and flash configuration in a 100-pin package, it is a strong candidate for compact industrial logic platforms. The A3P030-VQ100I should be selected when its specific density, speed grade, temperature grade, and configuration requirements match the target design rather than only when the package appears similar.
ドロップイン代替品: A3P030-VQ100I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A3P030-VQ100I (同一形状・フットプリント) — 相違点: Package, Logic Elements, RoHS Status, Core Supply Voltage, Mounting Type.
A3P030-VQG100I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P030-1VQ100I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P030-2VQ100I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P030-1VQG100I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P030-2VQG100I
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P030-VQ100I 最大定格&電気的特性
| FPGA Family | ProASIC3 |
| Programmable Logic Type | Flash FPGA |
| Equivalent Gate Count | 30,000 gates |
| Logic Elements | 330 logic elements |
| Maximum Operating Frequency | 231 MHz |
| Process Technology | 130 nm CMOS |
| Nominal Core Supply Voltage | 1.5 V |
| User I/O Count | 77 I/O |
| パッケージ | 100-pin TQFP |
| Package Designation | VQ100 |
| Temperature Grade | Industrial |
| Configuration Memory | Nonvolatile flash |
| 実装タイプ | Surface mount |
| Shipping Format | Tray |
| RoHS ステータス | RoHS non-compliant |
| Lead-Free Status | Contains lead |
A3P030-VQ100I vq100 ピン配置ガイド
A3P030-VQ100I (vq100 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A3P030-VQ100I.
詳細は データシート をご参照ください。
主な用途
A3P030-VQ100I の用途: 6 件s: Industrial Control Logic, Protocol Interface Bridging, Programmable Signal Conditioning, Embedded Data Acquisition, Power Supply Sequencing, Field-Programmable Automation.
Industrial Control Logic
The A3P030-VQ100I is suitable for compact industrial control modules that combine sequencing, interlocks, state-machine logic, and digital I/O. Its 330 logic elements and 30,000 equivalent gates provide enough density for control blocks without moving to a larger FPGA, while 77 user I/O supports sensors, actuators, and field-bus interfaces. The 231 MHz listed performance also handles timing-sensitive supervisory logic. Because configuration is stored in nonvolatile flash, the controller can retain its programmed behavior through power cycles and support controlled field updates. The industrial suffix aligns the device with industrial product requirements, subject to confirmation of the exact operating-temperature limits in the manufacturer datasheet.
おすすめ
Protocol Interface Bridging
The A3P030-VQ100I can bridge dissimilar digital interfaces when an existing product needs glue logic, command translation, or protocol adaptation. Its 77 user I/O provide substantial connectivity for parallel buses, serial engines, chip selects, and interrupt signaling, while the 30K-gate ProASIC3 resource level supports moderate state machines and data-path logic. The 231 MHz performance rating allows the bridge to operate faster than many low-speed industrial communication links. Flash configuration permits interface behavior to be revised without replacing the assembled board. Engineers should assign pins and I/O standards using the manufacturer pin-description table and validate timing with the device-specific constraints for the selected 100-pin package.
おすすめ
Programmable Signal Conditioning
The A3P030-VQ100I fits measurement and signal-conditioning subsystems that require configurable digital behavior close to analog front ends. Engineers can implement acquisition sequencing, gain-control state machines, calibration tables, threshold logic, and data formatting using 330 logic elements and 30,000 equivalent gates. With 77 I/O, the FPGA can connect multiple sensors, multiplexers, converters, and calibration networks while operating from a compact 100-pin TQFP footprint. Its 231 MHz rating provides timing margin for common low- and medium-speed control paths. Power and I/O standard selection remain application-specific, so confirm voltage tolerances and drive capabilities against the exact A3P030-VQ100I datasheet.
おすすめ
Embedded Data Acquisition
The A3P030-VQ100I can coordinate data acquisition from multiple digital sensors and converters in compact instrumentation equipment. Its 77 user I/O supports acquisition buses, chip-select signals, triggers, and status lines, while the programmable logic can perform filtering, decimation control, framing, and error detection. The 30K equivalent gates and 330 logic elements allow useful preprocessing without introducing a separate processor for simple control paths. Its 231 MHz maximum frequency provides ample headroom for many low-speed instrumentation buses. Design the clock and data paths to satisfy the device timing constraints, and use the manufacturer package information to assign configuration and dedicated pins correctly.
おすすめ
Power Supply Sequencing
The A3P030-VQ100I can implement programmable sequencing and supervisory logic for multi-rail industrial systems. Its flash-based configuration allows startup order, fault-latch behavior, and control tables to be changed during product maintenance, while 77 I/O provide connections to enable lines, reset signals, fault inputs, and status indicators. The 231 MHz performance is more than sufficient for typical sequencing paths, and the 30K-gate density can accommodate several coordinated rails plus monitoring logic. Because the core operates from a 1.5 V nominal supply, the FPGA itself requires a carefully regulated rail. Use the manufacturer power, pin, and I/O guidance to establish safe ramp behavior and fail-state responses.
おすすめ
Field-Programmable Automation
The A3P030-VQ100I is well suited to automation equipment that benefits from post-deployment logic revisions. Nonvolatile flash retains the configuration, allowing product variants and firmware-linked control changes to be programmed without adding a boot memory device. With 30,000 equivalent gates, 330 logic elements, and 77 I/O, one device can coordinate motion-enable interlocks, operator interfaces, alarm logic, and communication handshakes. The 100-pin TQFP package supports compact, surface-mount assembly, while the 231 MHz rating handles many timing-sensitive control paths. For safety-related designs, complete a separate hazard review and verify that all required diagnostics, environmental limits, and fail-safe behaviors are implemented and validated.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A3P030-VQ100I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A3P030-VQG100I | A3P030-1VQ100I | A3P030-2VQ100I | A3P030-1VQG100I | A3P030-2VQG100I |
|---|---|---|---|---|---|---|
| Package | TQFP-100 (VQ100) | TQFP-100 (VQ100) | TQFP-100 (VQ100) | TQFP-100 (VQ100) | TQFP-100 (VQ100) | TQFP-100 (VQ100) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Equivalent Gate Count | 30,000 gates | 30,000 gates | 30,000 gates | 30,000 gates | 30,000 gates | 30,000 gates |
| Logic Elements | 330 logic elements | 330 logic elements | 330 logic elements | 330 logic elements | 330 logic elements | 330 logic elements |
| User I/O Count | 77 I/O | 77 I/O | 77 I/O | 77 I/O | 77 I/O | 77 I/O |
| Speed Grade | Standard | Standard | -1 | -2 | -1 | -2 |
| Configuration Memory | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash |
| Process Technology | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS |
主な差別化要因
- Standard 231 MHz speed configuration (vs A3P030-1VQ100I)
- Complete 77-user-I/O resource in the 100-pin package (vs A3P030-VQG100I)
- Industrial A3P030 ordering configuration (vs A3P030-VQ100)
設計ノート
The A3P030-VQ100I uses a 1.5 V nominal core supply, so the power tree should provide a stable rail with low ripple and adequate transient response. Place the recommended input and bulk-decoupling capacitors close to the device power pins, follow the datasheet capacitor values, and provide clean returns for every supply connection. Account for configuration startup current and simultaneous I/O switching when sizing the regulator and copper paths. The target's detailed current limits and decoupling table must be taken directly from the manufacturer datasheet.
Use the 100-pin VQ100 footprint and assign every pin from the manufacturer pin-description table rather than from a generic 100-pin package drawing. Confirm the exposed functionality of configuration pins, clock inputs, user I/O, and dedicated power or ground pins before layout release. Maintain the manufacturer’s recommended placement and routing conventions, especially for clock and high-speed I/O paths. A package-compatible footprint is necessary for a drop-in alternative but is not a substitute for verifying the complete pin assignment.
The listed 231 MHz rating creates a clear need for controlled clock and I/O routing. Use short, continuous clock paths, avoid unnecessary stubs, provide a defined return reference, and keep switching signals away from sensitive configuration or measurement nodes. Match external clock characteristics to the selected ProASIC3 device and validate setup and hold timing with the device-specific constraints. Because A3P030 speed suffixes differ, rerun timing analysis whenever an alternate ordering code is substituted.
Do not treat A3P030-VQ100 and A3P030-VQ100I as interchangeable ordering codes: the A3P030-VQ100 listing is identified as commercial-temperature, while the target carries the industrial suffix. Also verify the speed suffix when comparing -1 and -2 variants, because a shared TQFP-100 footprint does not imply identical timing or power behavior. Validate the configuration interface, supply sequencing, boot behavior, and programming procedure as a complete replacement review before approving any substitution.
コンプライアンス情報
The indexed component specifications identify A3P030-VQ100I as RoHS non-compliant and containing lead. REACH, halogen-free, conflict-minerals, and automotive qualification information were not identified for the exact MPN.