A3P250-1PQ208 - 250K Gate ProASIC3 FPGA | Microchip Technology
部品番号: A3P250-1PQ208 ✓ 生産中A3P250-1PQ208 概要
A field-programmable gate array is a semiconductor device whose digital logic, routing, and I/O behavior are configured after manufacture. The ProASIC3 family belongs to the FPGA and CPLD hierarchy and provides a hardware implementation of parallel processing, control, interface, and protocol logic. Unlike a fixed-function ASIC, the A3P250-1PQ208 can be reprogrammed to support design revisions, field updates, product differentiation, and consolidated control logic.
The primary device features include 250K logic gates, 36,864 logic cells, 151 I/O resources, a 272 MHz maximum operating frequency, 130 nm process technology, and a 1.5 V core voltage. Its 208-pin package provides a substantial interface count for designs connecting external memories, data converters, communications transceivers, sensors, and industrial control equipment. The embedded flash configuration memory supports nonvolatile FPGA configuration in the finished system.
The A3P250-1PQ208 belongs to the ProASIC3 family, whose device options cover different logic densities and package configurations. Within the family, device migration is constrained by package pin compatibility, resource availability, I/O standards, timing performance, and power requirements. The Microchip migration application note identifies pin compatibility as a primary consideration when moving an A3P250 design to lower-density A3P125, A3P060, or A3P030 devices. Consequently, any substitute must be evaluated against both its physical footprint and the complete design-resource requirements.
Typical uses include industrial automation, instrumentation, communications control, embedded processing, test equipment, and general-purpose digital signal control. The 151-I/O configuration is particularly useful when a design must coordinate multiple buses or peripheral interfaces. At the same time, the 208-pin package requires careful PCB planning because high pin count increases routing complexity and makes power and ground distribution important for reliable operation at higher clock frequencies.
For new layouts, assign power and ground pins according to the manufacturer pinout and keep sensitive configuration or interface routing away from switching nodes. Verify that the selected device variant satisfies the required I/O voltage, speed grade, temperature range, and package dimensions. Existing boards should be checked against the exact manufacturer drawing before considering another ProASIC3 part as a replacement.
This page combines the exact A3P250-1PQ208 identity, verified family specifications, price treatment, documented drop-in candidates, and practical migration guidance. It also distinguishes confirmed package-compatible options from lower-density devices that can require logic reassignment, which helps engineers evaluate an FPGA replacement without treating shared package names as proof of complete design equivalence.
ドロップイン代替品: A3P250-1PQ208 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A3P250-1PQ208 (同一形状・フットプリント) — 相違点: Package, Device Type, Maximum Frequency.
A3P250-1PQG208I
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P250-PQG208I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P250-PQ208I
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P250L-1PQ208
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P250-1PQ208 最大定格&電気的特性
| Device Type | ProASIC3 Flash FPGA |
| Logic Gates | 250K gates |
| Logic Cells | 36,864 cells |
| User I/O | 151 I/Os |
| Maximum Frequency | 272 MHz |
| Process Technology | 130 nm |
| Core Supply Voltage | 1.5 V |
| パッケージ | 208-BFQFP |
| ピン数 | 208 pins |
| Configuration Memory | Embedded flash |
| FPGA Family | ProASIC3 |
| Programmability | User-programmable logic and I/O |
| 実装タイプ | Surface mount |
A3P250-1PQ208 208-bfqfp ピン配置ガイド
A3P250-1PQ208 (208-bfqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A3P250-1PQ208.
詳細は データシート をご参照ください。
主な用途
A3P250-1PQ208 の用途: 6 件s: Industrial Automation Controller, Test and Measurement Instrumentation, Communications Interface Controller, Data Acquisition and Signal Processing, Embedded Control Subsystem, Secure Network Equipment.
Industrial Automation Controller
The A3P250-1PQ208 fits an industrial automation controller that must combine parallel control logic with numerous external interfaces. Its 36,864 logic cells provide capacity for sequencing, state machines, diagnostics, and communication protocols, while 151 user I/Os can connect sensors, actuators, field buses, and status indicators. The device operates from a 1.5 V core supply and is housed in a 208-BFQFP surface-mount package. A practical implementation places the FPGA beside power conversion and interface transceivers, with careful partitioning of digital logic from noisy switching circuitry. The principal benefit is a consolidated programmable control architecture that can be updated without changing the PCB. Before deployment, confirm the exact suffix-specific temperature grade and qualification requirements for the operating environment.
おすすめ
Test and Measurement Instrumentation
The A3P250-1PQ208 is appropriate for programmable test and measurement equipment that requires flexible sequencing, timing, and data-routing resources. Its 250K logic gates and 36,864 logic cells can support acquisition control, pattern generation, trigger logic, and instrument-bus management, while the 151-I/O interface simplifies connections to analog front ends, counters, and communication ports. Operating up to 272 MHz provides a useful margin for parallel datapath implementation, although final timing must be verified against the selected clocking architecture and external interfaces. In an instrument, the FPGA should be placed near the controlled logic and memory circuitry while keeping analog and switching-converter paths separated. Configuration retention through embedded flash supports repeatable instrument startup and firmware revisions.
おすすめ
Communications Interface Controller
A3P250-1PQ208 can serve as the programmable controller in communications equipment where multiple channels or protocols must be coordinated. Its 151 user I/Os provide connections for serial transceivers, byte-wide buses, clocks, and control signals, and its 36,864 logic cells can implement framing, buffering, protocol conversion, and supervisory functions. The 272 MHz maximum frequency allows parallel processing where required, but designers should evaluate the complete datasheet timing limits rather than treating the headline frequency as a guarantee for every logic path. Place the FPGA close to transceiver and memory interfaces, maintain continuous power and ground planes, and avoid routing high-speed signals through uncontrolled stubs. The exact package and grade suffix should be selected against production environmental conditions before release.
おすすめ
Data Acquisition and Signal Processing
The A3P250-1PQ208 fits data-acquisition systems that require deterministic digital preprocessing between converters or sensors and a host processor. Available logic capacity can support filtering, decimation, channel interleaving, calibration tables, and data packing, while 151 I/Os can accommodate converter outputs, capture registers, clocks, and status signals. The 1.5 V core supply and 208-BFQFP package make it suitable for compact multi-channel instrument electronics. For best results, partition the design into clocked input capture, processing, and output stages, and apply timing constraints according to the manufacturer’s ProASIC3 documentation. External memory and high-speed interfaces must be routed with controlled impedance and short return paths. Validate conversion latency and clock-domain crossings in hardware because the maximum 272 MHz device frequency does not specify every implemented path.
おすすめ
Embedded Control Subsystem
The A3P250-1PQ208 can implement a flexible embedded control subsystem when a fixed microcontroller does not provide enough parallel logic or configurable I/O. The 36,864 logic cells are suitable for peripheral bridges, watchdog logic, deterministic task sequencing, and hardware acceleration around a host processor. Its 151 user I/Os allow the FPGA to supervise multiple sensors and actuators without burdening the host with every timing-critical operation. Because the device uses embedded flash for configuration, a compact product can retain its programmed control fabric across power cycles. The implementation should include a defined boot sequence, configuration validation strategy, and reset plan. Confirm the exact industrial temperature and qualification requirements of the selected ordering code before integrating it into continuously operating machinery or safety-adjacent control equipment.
おすすめ
Secure Network Equipment
The A3P250-1PQ208 is suitable for network and secure equipment designers who need parallel packet handling, buffering, or protocol-specific logic alongside dedicated processors. The 250K logic gates and 36,864 cells allow substantial datapath implementation, while 151 I/Os support memory, network PHYs, status signals, and board-management functions. Its 272 MHz maximum frequency is useful for synchronous packet-processing blocks, subject to successful timing closure at the required system clock. Place the FPGA adjacent to memory and network interfaces, maintain continuous power distribution, and isolate high-speed routing from switching regulators. Embedded flash permits persistent configuration, helping simplify field updates after programming. Security functions, operating grade, and device lifecycle should be evaluated independently because logic capacity alone does not establish a complete security or reliability case.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A3P250-1PQ208 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A3P250-1PQG208I | A3P250-PQG208I | A3P250-PQ208I | A3P250L-1PQ208 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| User I/O | 151 I/Os | 151 I/Os | 151 I/Os | 151 I/Os | 151 I/Os |
| Ordering Code | A3P250-1PQ208 | A3P250-1PQG208I | A3P250-PQG208I | A3P250-PQ208I | A3P250L-1PQ208 |
主な差別化要因
- Exact -1PQ208 ordering configuration (vs A3P250-1PQG208I)
- High logic capacity for consolidated control (vs XC2C384-7PQ208C)
- Large user-I/O allocation (vs A3P250L-1PQ208)
- Documented 272 MHz ProASIC3 performance class (vs A3P250-PQ208I)
設計ノート
Do not approve a replacement from the package name alone. Compare the complete ordering codes for A3P250-1PQ208 and the candidate, then review speed, temperature grade, I/O standards, configuration pins, exposed functions, and package drawings in the manufacturer documentation. The A3P250 family includes closely named devices such as A3P250-1PQG208I and A3P250-PQG208I, so incorrect suffix interpretation can place an unqualified or electrically different part on the board.
Treat the 208-BFQFP as a high-pin-count surface-mount package. Assign the power and ground pins according to the manufacturer pin-description table, use continuous power and ground planes where practical, and route configuration, clock, and high-speed interface signals with short paths. Do not rely on a generic 208-pin symbol: verify every numbered connection against the exact package drawing before releasing the PCB.
The ProASIC3 device uses a 1.5 V core supply. Follow the manufacturer’s recommended decoupling and power-sequencing requirements for the selected order code, including separate treatment of core and I/O supplies where specified. Account for voltage-dependent dynamic current at the 272 MHz maximum operating frequency and provide startup margin so the regulator does not become the limiting element in clock-intensive designs.
Separate sensitive clock and configuration paths from switching-regulator, relay, and high-current I/O routes. Keep external memories and high-speed transceivers close to their corresponding FPGA pins, use solid return paths beneath high-speed nets, and avoid unnecessary vias in clock distribution. After layout, run timing and signal-integrity checks using the constraints appropriate to the 272 MHz operating target rather than relying only on nominal device frequency.
A package-compatible FPGA is not automatically a drop-in functional replacement. Review embedded memory, PLL, clock, I/O, and configuration resources used by the design, then perform fit, timing, and power comparison. Lower-density A3P125, A3P060, and A3P030 devices may support package-oriented migration, but the manufacturer migration guidance requires resource reassignment where the higher-density design exceeds their capacities.
コンプライアンス情報
The verified records establish the ProASIC3 family, 130 nm process technology, package, and device functionality but do not provide suffix-specific compliance declarations. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status from the manufacturer documentation for the exact ordering code.