A54SX72A-FG256M - 72K Gate Antifuse FPGA 256-BGA | Microchip
部品番号: A54SX72A-FG256M ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
A54SX72A-FG256M 概要
An antifuse FPGA is a type of field-programmable gate array whose interconnect elements are permanently programmed at power-up or via a programmer, rather than stored in a configuration SRAM cell. As a class of programmable logic devices (PLDs), antifuse FPGAs sit alongside SRAM FPGAs and flash FPGAs in the programmable logic hierarchy. Because the configuration is hard-wired, antifuse devices retain their programming through power cycles, are inherently immune to configuration readback, and offer lower static power and better SEU robustness than SRAM-based alternatives.
Key features of the A54SX72A include a 0.25 um process technology, a single 2.5V core supply, and clock resources including dedicated CLKA and CLKB global clocks plus quadrant clocks (QCLK) for localized timing domains. The SX-A architecture uses a sea-of-modules structure with combinational and sequential logic modules, enabling high gate utilization typical of Actel antifuse families.
Technically, the device's 4,024 cells implement both combinational and registered functions, and the 217 MHz figure reflects the family's toggling-rate capability, suitable for glue logic consolidation, bus bridging, and state-machine implementations. The antifuse interconnect provides deterministic, one-time programmable routing that eliminates configuration-time boot delays - a distinct advantage over SRAM FPGAs in systems requiring instant-on operation.
Typical applications include industrial control, communications and networking line cards, avionics and military subsystems where configuration security matters, and single-chip integration of multiple discrete logic functions for system-wide cost savings.
When designing with this device, plan pin assignment carefully: antifuse FPGAs are one-time programmable, so a design error requires a new device rather than a simple reconfiguration. Verify I/O standards and power sequencing against the SX-A family datasheet before committing the design.
This page synthesizes verified distributor listings, cross-reference alternatives, and practical design guidance not consolidated in the manufacturer datasheet.
ドロップイン代替品: A54SX72A-FG256M — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A54SX72A-FG256M （同一形状・フットプリント） — 相違点: Package, Operating Temperature, System Gates, Process Technology, Family.
クイック比較ツール — 並列比較する代替部品を選択:
A54SX72A-FG256
✅ ドロップイン✓ 在庫あり
$89 / 個
データシートを見る →A54SX72A-FGG256
✅ ドロップイン✓ 在庫あり
$153.34 / 個
データシートを見る →A54SX72A-FGG256I
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →A54SX72A-FGG256A
✅ ドロップイン✓ 在庫あり
$148.4 / 個
データシートを見る →A54SX72A-1FGG256
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →A54SX72A-1FGG256M
✅ ドロップイン✓ 在庫あり
$258.66 / 個
データシートを見る →A54SX72A-2FGG256
✅ ドロップイン✓ 在庫あり
$217.72 / 個
データシートを見る →A54SX72A-FG256M 最大定格＆電気的特性
| Family | SX-A |
| System Gates | 108,000 |
| Logic Gates | 72,000 |
| Logic Cells / Modules | 4,024 |
| Maximum System Frequency | 217 MHz |
| Process Technology | 0.25 um |
| Core Supply Voltage | 2.5 V |
| User I/O | 203 |
| Programmable Type | Antifuse (One-Time Programmable) |
| パッケージ | 256-Ball FBGA (FG256) |
| 実装タイプ | Surface Mount |
| Packaging | Tray |
| On-chip Clock Resources | CLKA, CLKB global clocks plus quadrant clocks (QCLK) |
A54SX72A-FG256M 256-ball fbga (fg256) ピン配置ガイド
A54SX72A-FG256M (256-ball fbga (fg256) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A54SX72A-FG256M.
詳細は データシート をご参照ください。
主な用途
A54SX72A-FG256M の用途: 6 件s: Industrial Control and Automation, Communications and Networking Line Cards, Avionics and Defense Subsystems, Legacy Design Sustainment and Obsolescence Bridging, Single-Chip Logic Integration / Cost Reduction, Test and Measurement Instrumentation.
Industrial Control and Automation
The A54SX72A-FG256M suits industrial control backplanes and automation controllers where 72K gates of glue logic, bus arbitration, and state machines can be consolidated into one instantly-active chip. Because the antifuse configuration is active at power-up with no configuration load time, PLC I/O modules and motor-control interface boards come up immediately when the 24V industrial rail energizes the on-board 2.5V regulator. The 203 user I/O accommodate parallel fieldbus interfaces, encoder inputs, and discrete control signals, while the 217 MHz capability covers fast counter and comparator functions. Its immunity to configuration corruption also improves uptime in electrically noisy factory environments.
おすすめ
Communications and Networking Line Cards
In telecom and networking line cards, the A54SX72A-FG256M implements bus bridging, framing logic, and interface adaptation between MACs, PHYs, and backplane connectors. The 217 MHz toggle capability and dedicated CLKA/CLKB global clocks plus quadrant clocks (QCLK) allow multiple clock domains typical of line-card architectures. Antifuse determinism means the link logic is present the moment power is applied, simplifying bring-up sequencing with line-card processors. The 256-ball FBGA's 0.25 um 2.5V process keeps static power low, important for high-slot-count chassis thermal budgets, while the 203 I/O support wide parallel data paths.
おすすめ
Avionics and Defense Subsystems
The A54SX72A-FG256M fits avionics interface cards and defense subsystems where configuration security is essential: antifuse programming cannot be read back, protecting proprietary logic. The M temperature/packaging grade supports extended-environment requirements common in these programs. Typical uses include MIL-STD-style parallel data bus interfaces, radar signal pre-processing glue logic, and redundancy/voting circuits, implemented in the 4,024-cell array with instant-on behavior that satisfies power-up determinism expectations in flight hardware. The one-time-programmable nature also prevents in-flight configuration upset compared with SRAM-based devices requiring configuration integrity monitoring.
おすすめ
Legacy Design Sustainment and Obsolescence Bridging
Many mature products were designed around Actel SX-A FPGAs, and the A54SX72A-FG256M remains a production-supported device for sustaining those boards. Because the same 72K-gate die is offered in multiple package and speed suffixes (FG256, FGG256, FGG256I, 1FGG256, 2FGG256), procurement teams can bridge end-of-life packaging changes without PCB redesign - the 256-ball FBGA footprint is shared across the family. Its instant-on antifuse behavior also preserves the power-up timing assumptions of legacy designs that predate configuration-time-tolerant SRAM FPGA architectures, making it a low-risk replenishment part.
おすすめ
Single-Chip Logic Integration / Cost Reduction
Microchip positions SX-A devices for system-wide savings by integrating multiple discrete logic functions - PAL/GAL replacements, address decoders, bus transceivers' control logic, and counters - into one low-cost single-chip solution. A typical design replaces several 74-series devices with the A54SX72A-FG256M's 4,024 cells, cutting BOM line items, board area, and assembly cost. The 2.5V core with 203 I/O supports mixed 3.3V-interface systems, and the 217 MHz performance ceiling exceeds most glue-logic timing requirements. Instant power-up operation means the integrated logic behaves identically to the discrete devices it replaces.
おすすめ
Test and Measurement Instrumentation
Bench and rack instrumentation benefit from the A54SX72A-FG256M as timing-generator, trigger-logic, and bus-interface fabric. The deterministic antifuse fabric guarantees identical timing behavior from the first power cycle - valuable for calibration stability across instruments - while 4,024 cells handle trigger state machines, prescalers, and formatter logic, and the 217 MHz family toggle rate supports high-resolution timing generation. The 256-ball FBGA's 203 I/O connect to front-end ADC/DAC buses and rear-panel communication ports. Its low static 2.5V power helps meet instrument thermal and fan-noise targets in dense chassis.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A54SX72A-FG256M — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A54SX72A-FG256 | A54SX72A-FGG256I | A54SX72A-2FGG256 |
|---|---|---|---|---|
| Package | 256-Ball FBGA (FG256) | 256-Ball FBGA - same | 256-Ball FBGA - same | 256-Ball FBGA - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Logic Gates | 72,000 | 72,000 | 72,000 | 72,000 |
| System Gates | 108,000 | 108,000 | 108,000 | 108,000 |
| Logic Cells | 4,024 | 4,024 | 4,024 | 4,024 |
| User I/O | 203 | 203 | 203 | 203 |
| Core Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Temperature Grade | M grade (see ordering code) | Commercial | Industrial | Commercial (per suffix) |
| Speed Grade | Standard | Standard | Standard | Speed 2 (faster) |
主な差別化要因
- Instant-on antifuse configuration （vs SRAM FPGAs (e.g., Xilinx Spartan class))
- Configuration security by physics （vs A54SX72A-FGG256I)
- Faster timing option within same footprint （vs A54SX72A-2FGG256)
設計ノート
The A54SX72A-FG256M is one-time programmable (antifuse). Unlike SRAM FPGAs, a design error discovered after programming cannot be corrected in-circuit - the device must be discarded. Complete gate-level simulation, static timing analysis, and I/O assignment verification in Microchip Libero/Designer before releasing devices to programming. Maintain a programmed-device reserve of at least 5-10% for engineering changes in long-life programs.
The device operates from a single 2.5V core supply per the SX-A family data. Decouple each supply pin pair with 0.1 uF ceramic capacitors placed within 2 mm of the ball via, plus bulk 10 uF per power domain. Verify I/O bank voltage requirements for the 203 user I/O against your interface standards, and confirm power-up ramp requirements in the SX-A datasheet, since antifuse devices have different sequencing sensitivities than SRAM FPGAs.
Use the dedicated CLKA/CLKB global clock networks for high-fanout clocks and quadrant clocks (QCLK) for localized domains, as documented in Microchip's quadrant clock application notes for the A54SX72A and RT54SX72S. Avoid routing clocks through general fabric, which increases skew and jitter. For the 256-ball FBGA, keep high-speed I/O on balls adjacent to ground returns and simulate flight times for interfaces above 50 MHz.
コンプライアンス情報
Compliance data was not published in the verified web data for this MPN. The FGG package variants are Microchip's lead-free/green options; verify RoHS status of the FG256M suffix specifically with Microchip or the distributor before ordering.
