AD42377 - 12-Bit Analog to Digital Converter | Analog Devices
部品番号: AD42377 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.75 | $1,375.00 |
| 500 | $11.4 | $5,700.00 |
| 1,000 | $9.85 | $9,850.00 |
AD42377 概要
An analog-to-digital converter (ADC) is an integrated circuit that samples a continuous analog voltage and converts it into a discrete digital code at a specified sampling rate. In the broader system hierarchy, ADCs sit between analog signal-conditioning circuitry (amplifiers, filters, sensors) and a digital controller (MCU, FPGA, DSP). The 12-bit resolution class typically delivers ~0.024% full-scale quantization step (1 LSB = VREF/4096) and is widely used in industrial process control, sensor readout, motor control feedback loops, and portable instrumentation.
Key features of the AD42377 include single-supply operation, CMOS-compatible digital interface, and a small-form-factor surface-mount package suited for high-density PCB designs. The 12-bit core provides adequate resolution for closed-loop control and many measurement tasks without the cost and latency of higher-resolution 14-/16-/18-/24-bit converters. The device is offered through the ADI global authorized distributor network and ships in standard tape-and-reel packaging.
Architecturally, the AD42377 integrates a sample-and-hold front end, a successive-approximation register (SAR) or flash-style conversion core (per ADI's product category), an internal reference option, and a serial or parallel digital interface. Designers should consult the manufacturer datasheet for the exact input range, sample rate, channel count, and interface timing.
Typical applications include industrial process-control analog input modules, sensor-signal digitization in PLCs, temperature/pressure transmitter front ends, and battery-powered handheld instrumentation where moderate resolution, low power, and a compact footprint are required. When pairing the AD42377 with an upstream instrumentation amplifier, select one with low offset and low noise so that the ADC's quantization noise remains the dominant error source. Design with adequate input filtering (an RC anti-alias network) and bypass capacitors on every supply pin. This page synthesizes distributor stock, application guidance, and pin-compatibility notes beyond the raw datasheet.
ドロップイン代替品: AD42377 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD42377 （同一形状・フットプリント） — 相違点: Resolution.
クイック比較ツール — 並列比較する代替部品を選択:
AD42378
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
AD7942BCPZ
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.6 / 個
データシートを見る →AD42377 最大定格＆電気的特性
| Manufacturer | Analog Devices, Inc. |
| Product Category | Data Acquisition - Analog to Digital Converters (ADC) |
| 分解能 | 12 bit |
| 実装タイプ | Surface Mount |
| Packaging | Tape & Reel |
AD42377 standard ピン配置ガイド
AD42377 (standard パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD42377.
詳細は データシート をご参照ください。
主な用途
AD42377 の用途: 6 件s: Industrial Process Control Analog Input Module, Sensor Signal Digitization Front End, Battery-Powered Handheld Instrumentation, Motor Control Current / Voltage Feedback Loop, Data Acquisition System Analog Front End, IoT Edge Sensor Node Digitizer.
Industrial Process Control Analog Input Module
The AD42377's 12-bit resolution (4096 codes, ~0.024% per LSB) suits PLC analog input modules that monitor 4-20 mA or 0-10 V process variables such as tank level, flow rate, and pressure. Digitizing a 0-10 V signal yields ~2.4 mV per LSB, more than adequate for closed-loop control where the downstream PID controller smooths quantization noise. Place the ADC behind a signal-conditioning amplifier and a first-order RC anti-alias filter (fc ~ sample_rate / 2). The surface-mount package supports high-density backplane designs and the wide ADI authorized-distribution network minimizes sourcing risk for factory-floor deployments.
おすすめ
Sensor Signal Digitization Front End
The AD42377 digitizes low-bandwidth analog outputs from temperature, pressure, and position sensors after upstream amplification. For thermocouple or strain-gauge bridges, pair the ADC with a precision instrumentation amp such as AD8421 to bring the differential signal into the converter's input common-mode range. A 12-bit converter is sufficient for applications where the measurement precision requirement is ~0.1% of full scale; for higher-accuracy demands, escalate to 16-/18-/24-bit ADCs (e.g., AD7799). Bypass every supply pin with 0.1 uF ceramic plus 10 uF bulk capacitance to keep digital switching noise out of the analog reference.
おすすめ
Battery-Powered Handheld Instrumentation
Handheld multimeters, portable test gear, and field data loggers benefit from the AD42377's moderate resolution and surface-mount footprint. A 12-bit ADC provides adequate digitizing resolution for many field measurements while keeping system cost and power consumption low compared with 16-/18-bit parts. Operating from a single low-voltage supply simplifies Li-Ion or 4xAA battery designs. Designers should add power-rail sequencing and an LC filter on the supply line to suppress the boost-converter switching noise from contaminating the analog reference.
おすすめ
Motor Control Current / Voltage Feedback Loop
In brushless DC (BLDC) and stepper motor drives, the AD42377 can sample phase current or back-EMF voltage for the control loop's ADC channel. A 12-bit converter at moderate sampling rates is sufficient for trapezoidal commutation schemes; field-oriented control (FOC) requiring higher bandwidth may need faster sample rates. Place a low-inductance shunt resistor in series with the motor phase and amplify the differential voltage into the ADC's input range with a current-sense amplifier. The compact surface-mount package fits within the tight PCB real-estate of integrated motor-drive modules.
おすすめ
Data Acquisition System Analog Front End
Multi-channel data acquisition systems often allocate a 12-bit ADC such as the AD42377 per channel for cost-effective parallel sampling architectures. The surface-mount package supports dense PCB layouts where many ADCs sit close to their analog signal sources. Pair the converter with a low-noise reference (ADR01/ADR02) and an instrumentation amplifier to maximize dynamic range. Designers should synchronize sampling clocks across channels and use a common reference to minimize channel-to-channel gain error in measurement instruments.
おすすめ
IoT Edge Sensor Node Digitizer
Low-power IoT edge nodes (smart agriculture, environmental monitoring, smart-building sensors) use a 12-bit ADC such as the AD42377 to digitize analog sensor outputs before transmitting over BLE/LoRa. A 12-bit converter provides ~0.024% resolution, sufficient for slow-changing measurements such as soil moisture, ambient temperature, and indoor air-quality sensors. Operating from a coin-cell or Li-Ion battery, the design benefits from the ADC's compact surface-mount form factor. Place a low-pass RC filter ahead of the analog input to remove high-frequency environmental noise.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD42377 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD42378 | AD7942 |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 12 bit | 12 bit | 14 bit |
主な差別化要因
- ADI precision data-converter portfolio support and authorized distribution （vs ADS7813 (Texas Instruments))
- Same-family pin-compatibility within the AD4237x product line （vs AD7942 (Analog Devices 14-bit))
- 12-bit resolution targeted at cost-sensitive industrial applications （vs ADS8482 (Texas Instruments 14-bit, 65 MSPS))
設計ノート
Bypass every AD42377 supply pin with a 0.1 uF X7R ceramic placed within 2-3 mm of the pin, plus a 10 uF bulk tantalum or ceramic on each main supply rail. Estimated: switching noise on a poorly decoupled analog supply can couple into the ADC reference and degrade SNR by 6-10 dB. If the design uses a switching regulator upstream, add a ferrite bead and a second LC filter stage between the switcher and the ADC supply pin.
Place a first-order RC anti-alias filter on the analog input with a cutoff at one-half the sample rate (Nyquist). For example, with a 100 kSPS sample rate, fc ~ 50 kHz; choose R from the source impedance budget and C to set the corner. Estimated: at fc = 50 kHz with R = 1 kohm and C = 3.3 nF, attenuation at the ADC's first aliasing frequency (fs - fin) is approximately -40 dB/decade. Keep analog traces short and away from digital clock lines to minimize crosstalk.
Do not assume the AD42377's reference voltage without consulting the datasheet; many 12-bit ADCs require an external precision reference (e.g., ADR01/ADR02) to achieve datasheet SNR. Estimated: using the internal reference at 3.3 V versus an external 5 V reference can change full-scale range by 50% and effective LSB size by the same factor. Verify input common-mode range, absolute maximum ratings on analog inputs, and the digital-interface logic levels (typically 1.8 V, 3.3 V, or 5 V CMOS) before committing to a design.
コンプライアンス情報
Compliance status was not present in the verified web data captured on 2026-10-12. Confirm RoHS, REACH, lead-free, and conflict-mineral status directly on the Analog Devices product page or by contacting ADI customer support before qualifying the part for production.
