AD510LH/+ Precision Operational Amplifier | Analog Devices
部品番号: AD510LH/+ ✗ 生産終了AD510LH/+ 概要
An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. The AD510LH/+ belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and semiconductor. In a feedback circuit, the amplifier compares its differential input with a feedback-derived voltage and adjusts its output to reduce the resulting error. This principle supports closed-loop gains, filtering, buffering, instrumentation, and active transducer-interface functions.
The identified device is a general-purpose precision amplifier with one active amplifier channel, bipolar input construction, and an input offset voltage specified to a maximum of 25 uV. The TO-99-8 metal-can package provides eight physical lead positions and is designed for through-hole mounting rather than a surface-mount assembly. The slash-plus ordering notation is part of the exact manufacturer orderable designation and should be retained when creating a purchase order or checking a replacement.
AD510LH/+ is intended for applications in which low input offset is more important than a compact surface-mount footprint. Typical signal paths include low-level sensor amplification, bridge-amplifier front ends, precision current measurement, laboratory instrumentation, and analog measurement systems. The 25 uV maximum offset specification is particularly relevant when the amplified differential signal is small enough that input-referred error materially affects the final measurement result.
Compared with a general-purpose surface-mount amplifier, the TO-99-8 package offers a larger, through-hole construction that can simplify prototyping, socketed laboratory assemblies, and selected industrial instrument builds. Its metal-can format also differs from plastic small-outline packages, so PCB designers must not assume a land pattern can be shared with an SOIC or MSOP amplifier. Pin assignment, supply range, common-mode range, and output-swing limits must be checked in the Analog Devices datasheet before circuit release.
For a new design, the key design trade-off is precision-oriented through-hole packaging versus the smaller footprint and lower assembly cost associated with modern surface-mount operational amplifiers. Confirm that the selected replacement uses the same TO-99-8 lead arrangement and satisfies every voltage, current, noise, stability, and common-mode requirement. Decoupling capacitors should be placed close to the power pins, while signal routing should minimize parasitic capacitance and avoid long high-impedance traces.
This product page combines the exact AD510LH/+ identification, package information, orderable pricing references, drop-in comparison candidates, and application-focused engineering guidance. It also separates known device attributes from parameters that must be confirmed in the manufacturer datasheet, helping engineers plan sourcing and PCB reuse without relying on an incomplete cross-reference result.
ドロップイン代替品: AD510LH/+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
AD504JH
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD506JH
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD507JH
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD515AKH
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD517SH
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD510LH/+ 最大定格&電気的特性
| Product Type | Operational Amplifier |
| Number of Circuits | 1 circuit |
| Amplifier Function | General-purpose amplifier |
| Input Offset Voltage, Maximum | 25 uV |
| Input Transistor Type | Bipolar |
| パッケージ | TO-99-8 metal can |
| ピン数 | 8 pins |
| 実装タイプ | Through-hole |
AD510LH/+ to-99-8 metal can ピン配置ガイド
AD510LH/+ (to-99-8 metal can パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD510LH/+.
詳細は データシート をご参照ください。
主な用途
AD510LH/+ の用途: 6 件s: Precision Bridge Sensor Front End, Low-Level Signal Instrumentation, Current Measurement Signal Chain, Active Analog Filter, Process Control Analog Input, Audio and Communication Interface.
Precision Bridge Sensor Front End
The AD510LH/+ is appropriate for conditioning low-level differential signals from resistive bridge sensors because its specified maximum input offset voltage is 25 uV and its bipolar input stage suits general-purpose precision-amplifier designs. It can be placed in an instrumentation-amplifier input stage or a carefully balanced differential stage when the sensor output is small relative to the common-mode voltage. The important design check is common-mode range: the sensor excitation midpoint, tolerance, and fault excursions must remain inside the amplifier's permitted input window. Use the manufacturer pin and compensation guidance, place the feedback network close to the device, and avoid routing the bridge output beside switching power circuitry. Its TO-99-8 metal-can package makes the part especially practical for socketed laboratory instruments and selected through-hole industrial measurement equipment.
おすすめ
Low-Level Signal Instrumentation
The AD510LH/+ can serve as the first gain stage in laboratory instrumentation where a millivolt-level sensor signal must be amplified before digitization. Its 25 uV maximum input offset rating makes offset error an explicit consideration when calculating total measurement error, while its bipolar input architecture fits general-purpose closed-loop amplifier configurations. Designers should still account for input bias current, input voltage noise, temperature drift, common-mode range, and output-swing limits from the manufacturer datasheet. The through-hole TO-99-8 package supports socketed modules and repairable analog boards. Keep high-impedance input wiring short, use a low-noise reference supply, and establish compensation or stability requirements before increasing closed-loop gain. This use is particularly appropriate when serviceability and precision matter more than minimum PCB area.
おすすめ
Current Measurement Signal Chain
The AD510LH/+ is suitable for amplifying the differential voltage generated by a current-shunt or current-sense element when the required common-mode voltage lies within the device's operating range. A 25 uV maximum input offset is relevant because shunt voltage often scales directly with measured current, making amplifier offset a fixed contribution to the displayed result. The amplifier can be configured in a transimpedance or differential gain stage, depending on the shunt topology and system grounding. Input bias current can create error across high source impedance, so the datasheet values must be compared with the sensor-network impedance. The TO-99-8 package provides a robust through-hole format for industrial test fixtures and analog measurement panels, while short feedback traces and a single-point ground return help preserve accuracy.
おすすめ
Active Analog Filter
The AD510LH/+ can implement an active filter when the signal bandwidth and stability requirements fall within the device's datasheet limits. Its single-amplifier architecture permits standard inverting, non-inverting, and integrator-based filter topologies, with the 25 uV maximum input offset contributing to DC error in low-frequency stages. Component tolerances, amplifier noise, and open-loop characteristics must be included in the filter design rather than treated as ideal values. The metal-can package is useful in educational, laboratory, and serviceable analog assemblies where users can socket the amplifier and adjust or replace it easily. Keep the input and feedback components close to the eight leads, provide local supply bypassing, and route the output away from sensitive input nodes to reduce parasitic feedback and oscillation risk.
おすすめ
Process Control Analog Input
The AD510LH/+ can amplify a low-level process-control signal when the controller requires a clean analog input and the industrial signal falls within the amplifier's supply and common-mode limits. Its 25 uV maximum offset rating helps preserve small-signal information, while the through-hole TO-99-8 package supports serviceable control cards and legacy industrial instrumentation. Before adoption, verify operating-temperature limits, input-bias-current error, transient protection needs, and long-term drift against the process accuracy budget. Place the amplifier away from relays, contactors, and high-dv/dt switching nodes, and use shielding or differential routing where long sensor cables are unavoidable. Local bypass capacitors and a low-impedance analog return reduce supply noise and ground-potential errors in the measurement chain.
おすすめ
Audio and Communication Interface
The AD510LH/+ can be evaluated for audio or communication-interface buffers when the circuit needs a general-purpose bipolar amplifier and its frequency, noise, and output-drive requirements fall within the datasheet limits. The 25 uV maximum input offset is less significant for many full-scale audio paths than for millivolt measurement channels, so input noise, gain-bandwidth product, slew rate, and output-current capability become the principal checks. The TO-99-8 package suits laboratory audio prototypes and through-hole interface boards but consumes more board area than a surface-mount amplifier. Use short, shielded input routing for low-level signals, decouple the supply pins near the device, and prevent output-current transients from disturbing sensitive downstream stages. Validate frequency response and distortion in the final network rather than inferring performance from offset voltage alone.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD510LH/+ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD504JH | AD506JH | AD507JH | AD515AKH | AD517SH |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | TO-99-8 Metal Can | TO-99-8 Metal Can | TO-99-8 Metal Can | TO-99-8 Metal Can | TO-99-8 Metal Can | TO-99-8 Metal Can |
主な差別化要因
- Bipolar-input general-purpose precision architecture (vs AD515AKH)
- Exact 25 uV maximum input offset specification (vs AD504JH)
- General-purpose single-amplifier configuration (vs AD517SH)
- Serviceable through-hole TO-99-8 construction (vs AD506JH)
設計ノート
Assign the AD510LH/+ circuit using the official TO-99-8 pin-description table rather than relying on the package outline alone. The eight leads may include offset-null, compensation, supply, and signal functions, and substituting a different amplifier with the same metal-can body can change lead assignments. Before PCB release, compare every numbered lead, confirm the exposed thermal or electrical requirements of the can package, and verify that the hole pattern and lead diameter match the selected device. A socket may simplify servicing, but its contact resistance and capacitance should be included when the feedback node is sensitive.
Keep the non-inverting input, inverting input, and feedback components close to the TO-99-8 package, and route them away from digital clocks, relay contacts, and power-converter switching nodes. High-impedance sensor inputs should use short traces with a nearby stable return path to reduce capacitive pickup and ground-potential modulation. When the amplifier drives a load, place the load or isolating resistor at the output pin and check capacitive-load stability using the manufacturer guidance. Do not add large capacitors directly across the output unless the application and stability conditions have been evaluated.
Estimated: determine worst-case linear-amplifier dissipation from Pdiss = (VIN - VOUT) × IOUT plus the quiescent contribution, using the actual rail differential, output current, and operating temperature. Compare the resulting junction-temperature estimate with the device's maximum rating and the thermal resistance applicable to the selected package mounting method. A TO-99-8 metal can may dissipate heat effectively in a socket or board, but the actual thermal path can dominate the result. Do not use the 25 uV offset specification as a substitute for supply, current, and thermal limits.
Avoid choosing a replacement solely because it fits TO-99-8. AD515AKH, for example, uses a JFET input stage, so its bias-current and noise behavior differs from the bipolar-input AD510LH/+. Confirm maximum input offset, offset drift, input bias current, common-mode range, output swing, supply limits, bandwidth, slew rate, noise, compensation requirements, and exact pin mapping. Also check that the replacement's temperature range and qualification status meet the application environment. Breadboard the candidate before modifying production hardware.
コンプライアンス情報
The manufacturer classification identifies AD510LH/+ as an operational amplifier for general-purpose use. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current Analog Devices product documentation or supplier documentation.