AD538ADZ - 4-Quadrant Analog Computation Unit | ADI
部品番号: AD538ADZ ✓ 生産中AD538ADZ 概要
An analog computational unit, or ACU, is a specialized analog integrated circuit that computes mathematical relationships directly from continuously varying electrical signals. Unlike a digital processor, it performs multiplication, division, and exponentiation in real time without converting the inputs to digital form. Within the broader hierarchy of analog multiplication ICs, divider ICs, and special-purpose signal-processing ICs, the AD538ADZ provides a compact way to implement control, measurement, modulation, and feedback functions.
The AD538ADZ provides four-quadrant multiplication, supporting both positive and negative input polarities. Its monolithic construction reduces the number of separate multipliers, dividers, and surrounding operational amplifiers normally required to implement equivalent calculations. Laser wafer trimming improves production consistency and supports multiplication and division errors as low as 0.25% of reading, making the device useful where accuracy must be combined with continuous analog operation.
Internally, the circuit uses analog computational techniques to calculate products, ratios, and exponential relationships directly from voltage inputs. The low input and output offset voltages help preserve accuracy near the origin, while excellent linearity extends useful performance across the operating input range. The AD538ADZ is therefore more than a general-purpose multiplier: it is a dedicated computational building block for systems where the output must vary continuously and proportionally with one or more analog inputs.
Typical uses include analog servo loops, automatic-gain-control circuits, measurement and control systems, signal conditioning, modulation, demodulation, and real-time feedback calculations. It can also simplify instrumentation in which a computed analog quantity is needed before conversion by an ADC. Compared with a software-defined calculation approach, the ACU avoids conversion delay and processor overhead, although the surrounding circuit still requires careful reference, grounding, and stability design.
For new designs, verify the complete pin assignment and transfer equations in the Analog Devices AD538 datasheet before layout, because the 18-pin SBDIP construction differs from common surface-mount multiplier packages. Pay particular attention to supply bypassing, analog signal routing, reference behavior, and output loading. A prototype should also verify multiplication and division error across the intended input range rather than relying on a single operating point.
This page organizes the AD538ADZ product information, sourcing details, comparison points, and engineering guidance into one compact reference. It also distinguishes the validated AD538BDZ replacement from the many search results that only describe generic multiplier or cross-reference functions without confirming a pin-compatible AD538ADZ substitute.
ドロップイン代替品: AD538ADZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD538ADZ (同一形状・フットプリント).
AD538BDZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD538ADZ 最大定格&電気的特性
| Product Type | Monolithic real-time analog computational unit |
| Supported Operations | Multiplication, division, and exponentiation |
| Quadrants | 4 quadrants |
| Multiplication and Division Error | As low as 0.25% of reading |
| Linearity | Excellent linearity; numerical value not stated |
| Input Signal Type | Analog voltage |
| Output Signal Type | Analog voltage |
| Package Type | 18-pin SBDIP |
| 実装タイプ | Through-hole |
| Trim Technology | Laser wafer trimming |
| Construction | Monolithic |
AD538ADZ 18-pin sbdip ピン配置ガイド
AD538ADZ (18-pin sbdip パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD538ADZ.
詳細は データシート をご参照ください。
主な用途
AD538ADZ の用途: 6 件s: Analog Servo Control, Automatic Gain Control, Precision Measurement Systems, Signal Modulation and Demodulation, Exponential Control Loops, Industrial Feedback Systems.
Analog Servo Control
The AD538ADZ suits analog servo loops that require a continuously calculated product or ratio. Its 4-quadrant multiplication operation handles positive and negative input combinations without digital conversion, allowing the computed control signal to respond in real time. Multiplication and division errors can be as low as 0.25% of reading after laser wafer trimming, while low offset voltages help control systems operate accurately near zero. The circuit can be placed in the forward path between error and feedback signals, with the Analog Devices datasheet transfer equations used to establish scaling. This approach reduces digital latency but requires attention to loop stability, reference accuracy, bypass placement, and the 18-pin SBDIP footprint.
おすすめ
Automatic Gain Control
The AD538ADZ is appropriate for automatic-gain-control architectures where the output amplitude must track the ratio of two analog signals. Its division operation computes this relationship continuously, and 4-quadrant multiplication supports control systems that may encounter bipolar inputs. The manufacturer identifies multiplication and division errors as low as 0.25% of reading, while the device’s low input and output offset voltages improve behavior close to the origin. Engineers can use the computed ratio to drive a multiplying stage or generate a correction voltage. Practical implementation requires stable references, controlled signal bandwidth, short analog routing, and verification that the intended AGC range remains inside the AD538’s linear operating region.
おすすめ
Precision Measurement Systems
The AD538ADZ can calculate product, ratio, and exponential terms directly within an analog measurement chain. This is useful when a result must be available before ADC sampling or when the measured variable changes faster than a digital computation path can respond. Its laser-trimmed construction supports multiplication and division errors as low as 0.25% of reading, and excellent linearity supports calculations over a wide input dynamic range. In instrumentation, the ACU may process sensed and reference voltages to form a compensated measurement. System accuracy still depends on sensor conditioning, reference stability, grounding, temperature effects, and calibration. Use the manufacturer transfer equations to establish polarity and scaling before PCB routing.
おすすめ
Signal Modulation and Demodulation
The AD538ADZ supports signal-conditioning paths that require analog multiplication of a signal with a control, carrier, or feedback waveform. Its 4-quadrant capability permits modulation of bipolar as well as unipolar signals, while the monolithic construction reduces the component count associated with separate multiplier and amplifier stages. Real-time operation is valuable in feedback control and modulation circuits where conversion-based multiplication would add delay. The AD538ADZ can achieve multiplication and division errors as low as 0.25% of reading after wafer trimming, but the complete modulation accuracy will also depend on the other signal-chain components. High-impedance routing and careful supply decoupling are important for preserving the computational signal.
おすすめ
Exponential Control Loops
The AD538ADZ provides an analog exponentiation function for control loops that naturally operate in logarithmic or exponential relationships. Computing the exponential response continuously can simplify loop realization and avoid software or lookup-table delay. The monolithic computational circuit is intended to provide precision over an unusually wide input dynamic range, combining low offset behavior with excellent linearity. Designers can use this function in nonlinear control, compensation, or signal-conditioning networks where the required relationship is represented by the manufacturer’s transfer equations. Because the computation remains analog, component tolerances and reference drift directly influence accuracy. Validate input limits, output range, temperature behavior, and stability across the full control range before using it in production equipment.
おすすめ
Industrial Feedback Systems
The AD538ADZ can form the mathematical core of an industrial feedback system requiring real-time products or ratios. Its 4-quadrant operation permits bipolar error and feedback signals, and its monolithic construction simplifies analog computation compared with several discrete blocks. The device’s multiplication and division accuracy can reach 0.25% of reading following laser wafer trimming, making it relevant to precision process-control and test systems. Since the AD538ADZ uses an 18-pin SBDIP package, it is particularly suitable for through-hole industrial and retrofit assemblies rather than compact surface-mount designs. Confirm environmental limits and calibration requirements, use low-noise references, and route sensitive analog nets away from switching nodes to maintain predictable performance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD538ADZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD538BDZ |
|---|---|---|
| Package | 18-pin SBDIP | 18-pin SBDIP |
| Brand | Analog Devices | Analog Devices |
| Product Type | Monolithic real-time analog computational unit | Monolithic real-time analog computational unit |
| Supported Operations | Multiplication, division, and exponentiation | Multiplication, division, and exponentiation |
| Quadrants | 4 quadrants | 4 quadrants |
| Multiplication and Division Error | As low as 0.25% of reading | Tightened accuracy specifications |
| Architecture and Transfer Function | AD538 monolithic computational architecture | Identical architecture and transfer function |
| Pin Compatibility | 18-pin SBDIP | Identical pinout |
| Construction | Monolithic | Monolithic |
主な差別化要因
- Dedicated real-time analog computation (vs AD538BDZ)
- Four-quadrant signal handling (vs AD538BDZ)
- Pin-compatible migration path (vs AD538BDZ)
設計ノート
Place input, output, supply, and reference decoupling directly beside their corresponding AD538ADZ pins. The 18-pin SBDIP provides through-hole spacing, but shorter analog traces still reduce susceptibility to noise pickup and reference disturbance. Keep sensitive computation nets away from switching-regulator nodes and relay wiring, and use a clean ground return for the reference and analog outputs.
Establish input polarity, scaling, and denominator limits from the manufacturer transfer equations before routing the board. Four-quadrant operation permits bipolar combinations, so an incorrect sign convention can reverse a feedback loop even when the device operates correctly. Validate multiplication, division, and exponentiation over the intended input range with known test signals and check both nominal and worst-case accuracy.
Do not assume that a generic multiplier or cross-reference result is pin-compatible with the AD538ADZ. The AD538BDZ is specifically documented as sharing the architecture, pinout, and transfer function, while tightened accuracy distinguishes its grade. Confirm supply voltage, temperature range, offset, linearity, and reference requirements in the manufacturer datasheet before substituting any part.
Follow the datasheet’s recommended supply and bypass network rather than selecting capacitors solely by capacitance. Reference noise and supply variation can affect the computed result even when the AD538’s internal trimming is accurate. Measure supply ripple at the device pins under operating load and verify that reference startup, settling, and output loading do not introduce unacceptable transients.
コンプライアンス情報
The available product records do not provide definitive environmental-compliance declarations for the AD538ADZ. An engineer discussion states that RoHS was not a stated requirement for that particular project, which does not establish the component’s compliance status.