Analog Devices

AD60000 - Dual 0 to +40 dB Wideband VGA | Analog Devices

部品番号: AD60000 ✓ 生産中
100 V/V at +40 dB Vdss 20 pins Package
MOQ: 1 |

AD60000 概要

Analog Devices AD60000 is a dual, low-noise, wideband variable gain amplifier with a gain range of 0 dB to +40 dB. The device is packaged in a 20-pin integrated-circuit package and combines two variable-gain amplifier channels for applications requiring independent or coordinated signal-level control. Its low-noise, wideband design places it in the amplifier IC category, where gain adjustment, signal fidelity, bandwidth, and channel matching determine suitability.

A variable gain amplifier, or VGA, is an amplifier whose gain can be controlled through an external signal. Unlike a fixed-gain amplifier, a VGA allows a system to adapt signal amplitude across different operating conditions, input ranges, or receiver stages. Within the broader hierarchy, a VGA is an amplifier IC, a signal-conditioning component, and ultimately part of the broader analog and mixed-signal semiconductor family.

The AD60000's principal specified features are its dual-channel architecture, 0 dB to +40 dB gain range, low-noise operation, and wideband signal handling. Independent control of two channels can simplify receiver and instrumentation designs that must process two signals with different amplitudes. The 40 dB maximum gain corresponds to a voltage gain factor of 100 at the maximum setting, while 0 dB represents unity voltage gain.

The dual topology can reduce the component count when a system requires two adjustable gain paths. It can also support balanced signal chains when the two channels process complementary or differential signals. Designers must still account for control-voltage range, gain-control bandwidth, channel-to-channel behavior, input and output impedance, supply requirements, and stability when placing the device in the final circuit.

Typical uses include RF and IF signal conditioning, communications receivers, test and measurement front ends, instrumentation, and other wideband systems requiring adjustable signal amplitude. In these applications, the AD60000 can establish a controlled signal level before downstream amplification, conversion, analysis, or digitization. The appropriate gain-control interface and signal-path layout remain central to successful implementation.

For PCB implementation, follow the manufacturer's pin-description table and recommended application circuit. Keep the gain-control path short, maintain controlled return paths around each amplifier channel, and provide local supply decoupling at the device pins. Verify bandwidth, output swing, noise behavior, and stability across the intended gain range before committing the layout.

This product record combines the AD60000's published gain and channel characteristics, price-break evidence, application guidance, and engineering design considerations into a compact selection reference. It also distinguishes confirmed drop-in replacements from parts that may merely be similar in function, helping engineers avoid assumptions about footprint, pinout, and electrical compatibility.

ドロップイン代替品: AD60000 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

AD60000 仕様

Architecture 2 independent amplifier channels
Product Type Dual variable gain amplifier
Gain Range 0 dB to +40 dB
Maximum Voltage Gain 100 V/V at +40 dB
Minimum Voltage Gain 1 V/V at 0 dB
Noise Characteristic Low noise
Bandwidth Characteristic Wideband
Package Pin Count 20 pins

AD60000 20 pins ピン配置ガイド

AD60000 (20 pins パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

AD60000 の 20 pins パッケージピン配置図

詳細なピン配置データはありません: AD60000.

詳細は データシート をご参照ください。

主な用途

AD60000 の用途: 6 件s: RF Receiver Front End, Communications IF Conditioning, Precision Test and Measurement, Instrumentation Signal Conditioning, Wideband Sensor Interface, Industrial Control and Monitoring.

🌐

RF Receiver Front End

The AD60000 fits an RF receiver front end when two adjustable, wideband signal paths are required. Its two variable-gain channels can independently set signal levels, while the 0 dB to +40 dB range covers unity gain through 100 V/V maximum voltage gain. This makes the device relevant to gain control before IF processing, demodulation, or measurement. The implementation should preserve short RF paths, maintain controlled impedance, and isolate the gain-control routing from sensitive high-frequency nodes. Verify frequency response and signal swing in the intended operating band before committing to the layout.

📡

Communications IF Conditioning

The AD60000 can be evaluated for communications IF conditioning where two related channels need programmable amplitude control. A wideband dual variable-gain amplifier provides 0 dB to +40 dB adjustment and can establish consistent signal levels before later gain stages or demodulation. The two-channel structure can also support complementary processing paths. Design checks should include gain-control bandwidth, gain accuracy, channel-to-channel consistency, input impedance, output headroom, and stability across the complete operating range. The exact interface and electrical limits must come from the manufacturer documentation.

🔧

Precision Test and Measurement

The AD60000 is relevant to test and measurement front ends that require automatic signal-level adjustment across two channels. The 0 dB setting provides unity gain, while +40 dB corresponds to 100 V/V, giving designers substantial range for normalizing inputs before analysis or conversion. Two channels can process related signals or support complementary measurements. The circuit should include suitable input termination, controlled impedance routing, and local supply bypassing. Validate noise, bandwidth, output swing, and settling performance across the intended measurement range before production use.

🖥️

Instrumentation Signal Conditioning

AD60000 can be considered for instrumentation signal conditioning when two wideband channels must be adjusted to match later analog or digital stages. Its 0 dB to +40 dB gain range allows a signal to be passed at unity gain or amplified by as much as 100 V/V, helping control the operating point presented to downstream circuitry. The dual format may simplify parallel measurement channels. Layout should minimize loop area, preserve return paths, and keep the gain-control network away from sensitive inputs. Confirm noise and frequency-response requirements against the instrumentation bandwidth.

🧩

Wideband Sensor Interface

The AD60000 can be evaluated for conditioning signals from moderate-bandwidth sensors when two outputs must be brought into a usable amplitude range. The wideband, low-noise VGA architecture and 0 dB to +40 dB adjustment range are useful for scaling rather than simply amplifying a fixed input. The two channels may handle two sensor outputs or one signal and a related reference. Check the sensor impedance, input bandwidth, allowable signal amplitude, gain-control settling, and downstream noise requirements. Use the manufacturer's electrical limits to select termination and operating gain.

🏭

Industrial Control and Monitoring

The AD60000 is applicable to industrial monitoring paths that need dual adjustable amplification between a sensing stage and downstream processing. A gain range of 0 dB to +40 dB allows the same amplifier architecture to handle signal levels from unity gain to 100 V/V, potentially simplifying control across multiple channels. For industrial equipment, maintain controlled grounding, provide local supply decoupling, and avoid routing gain-control signals next to sensitive inputs. Confirm operating temperature, supply voltage, and long-term reliability requirements before deploying the device in an industrial enclosure.

What is the AD60000?
The AD60000 is a dual, low-noise, wideband variable gain amplifier manufactured by Analog Devices. It provides two amplifier channels with a stated gain range of 0 dB to +40 dB and is supplied in a 20-pin integrated-circuit package. The dual-channel arrangement is useful when a design requires two adjustable signal paths, such as RF or IF conditioning, receiver front ends, instrumentation, or communications equipment.
What are the key specifications of AD60000 that engineers should know?
The key AD60000 specifications are its dual-channel architecture, low-noise and wideband characteristics, and adjustable gain from 0 dB to +40 dB. The maximum setting represents 100 V/V voltage gain, while 0 dB represents 1 V/V. The device has 20 package pins. Supply voltage, operating frequency, input range, output swing, and gain-control details should be confirmed from the manufacturer datasheet before final circuit design.
What is the gain range of the AD60000?
The AD60000 has an adjustable gain range from 0 dB to +40 dB. At 0 dB, the nominal voltage gain is 1 V/V, while +40 dB corresponds to 100 V/V. This broad adjustment range allows an engineer to select a signal level according to input conditions and downstream circuit requirements. The manufacturer's datasheet should be used to confirm control-voltage sensitivity, gain accuracy, and bandwidth at each operating point.
Where can I download the AD60000 datasheet PDF?
The AD60000 datasheet can be located through the linked Analog Devices documentation search or the datasheet reference page on this product page. The manufacturer datasheet is the controlling document for the 20-pin pinout, electrical characteristics, gain-control method, supply requirements, and recommended application circuits. Use that document to verify board connections before fabrication, especially for the two amplifier channels and their control interfaces.
Where is the AD60000 pinout?
The AD60000 pinout is identified as a 20-pin arrangement, but the individual pin names and numbers are not reproduced here because the manufacturer's pin-description table must be used for final board design. Consult the pin-description table and package drawing in the manufacturer datasheet, then cross-check every connection, supply pin, ground pin, signal input, signal output, and gain-control connection against the selected footprint.
Is the AD60000 suitable for RF and IF signal conditioning?
The AD60000 is suitable for evaluating in RF and IF signal-conditioning paths because the manufacturer describes it as a dual, low-noise, wideband variable gain amplifier with 0 dB to +40 dB gain. Suitability for a particular operating frequency is not established by the gain range alone. Verify frequency response, noise figure, input impedance, output impedance, stability, and permissible signal levels against the manufacturer datasheet for the intended RF or IF band.
Can AD60000 be used for instrumentation and test equipment?
The AD60000 can be considered for instrumentation and test-equipment front ends where two adjustable, wideband signal paths are beneficial. Its 0 dB to +40 dB range provides useful attenuation-free unity gain at one end and up to 100 V/V at the other. The final design must still confirm input bandwidth, output swing, noise performance, settling behavior, and control stability for the selected measurement bandwidth and signal amplitude.
Where can I buy AD60000 online?
AD60000 can be requested through the Request a Quote form on this page, where the exact package code, quantity, date code, and delivery requirements should be stated. The form is the appropriate channel for checking current commercial availability and lead time because both can change with demand, lot status, and packaging requirements. Do not infer current stock from the existence of a product listing or a historical quantity-break table.
What is the price of AD60000?
AD60000 pricing depends on quantity, order date, lot status, and the exact ordering configuration. Current commercial pricing should be obtained through the Request a Quote form on this page rather than from a static price figure. The structured price evidence on this page preserves the published quantity breaks for traceability, while the quote form provides the transaction-specific response for the intended order quantity.
What is the lead time for AD60000?
The current AD60000 lead time should be confirmed through the Request a Quote form on this page. Lead time can depend on quantity, package configuration, manufacturing status, and inventory conditions, so it should not be inferred from a distributor listing or the stated stock quantity of 1000 units. Include the required quantity and target delivery date in the quote request for a more useful response.
Is AD60000 in stock?
AD60000 inventory should be checked through the Request a Quote form on this page because stock levels vary by order quantity and package code. One listing reports an available quantity of 1000 units, but that figure is not a guarantee for every order configuration or future shipment. Request confirmation of physical stock, date code, lot traceability, and estimated dispatch timing using the Request a Quote form.
What is the best drop-in replacement for AD60000?
No confirmed drop-in replacement for AD60000 has been established in the available cross-reference results, so the correct answer is to qualify a candidate against the manufacturer datasheet rather than select an unverified substitute. A true replacement must use the same 20-pin footprint, preserve pin-to-pin assignments, and remain within acceptable limits for bandwidth, gain range, noise, supply voltage, input impedance, and output swing. Similar function alone does not establish drop-in compatibility.
What can replace AD60000?
A functional VGA can potentially replace AD60000, but a PCB-level drop-in replacement cannot be named without verified package and pinout equivalence. The AD60000 has two channels and a 0 dB to +40 dB gain range, so a candidate should match those core functions and be checked for equivalent control characteristics, frequency response, noise, signal swing, and supply requirements. Redesign the footprint and control interface if those checks fail.
Is AD60000 the same as AD8021ARZ-REEL7?
AD60000 and AD8021ARZ-REEL7 cannot be treated as identical or automatically interchangeable. AD60000 is a dual variable gain amplifier with a 0 dB to +40 dB range, whereas AD8021ARZ-REEL7 appears in a similarity listing but is explicitly flagged as requiring datasheet and pinout checks. Confirm package dimensions, every pin assignment, gain-control method, bandwidth, noise, supply voltage, and output swing before considering a board change.
When should I choose AD60000 instead of another amplifier?
Choose AD60000 when the design specifically benefits from two low-noise, wideband variable-gain channels with a 0 dB to +40 dB range. It is particularly relevant when two related signals require adjustable amplitude, including complementary RF or IF paths and instrument front ends. Select another amplifier when its fixed gain, bandwidth, noise, control interface, power requirements, or package better match the system and no replacement validation is needed.
What cross-brand equivalent should I evaluate for AD60000?
No cross-brand equivalent has been verified as a drop-in replacement for AD60000. A valid evaluation candidate must retain the 20-pin package and exact pin functions while providing two adjustable channels spanning a comparable 0 dB to +40 dB gain range. Before schematic or PCB substitution, compare frequency response, noise, gain-control linearity, supply voltage, input and output impedance, output swing, channel matching, and thermal performance using manufacturer documentation.

エンジニアリング参考データ: AD60000 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose AD60000 when the system needs two wideband, low-noise variable-gain channels with adjustment from 0 dB to +40 dB. It is especially useful in RF or IF conditioning, communications receivers, instrumentation, and dual-channel measurement systems where signal normalization is required. Choose a fixed-gain amplifier when gain does not need adjustment and simpler control is more important. Choose a single-channel VGA when only one programmable path is required and component count is not a priority. No drop-in substitute should be selected without checking the 20-pin footprint, exact pin functions, gain-control interface, frequency response, noise, supply requirements, and signal swing. Similar amplifier function does not establish replacement compatibility.

代替品との比較

パラメータ この製品
Architecture Dual variable gain amplifier
Gain Range 0 dB to +40 dB
Maximum Voltage Gain 100 V/V
Noise Characteristic Low noise
Bandwidth Characteristic Wideband
Package 20-pin integrated-circuit package
Brand Analog Devices
Product Category Variable gain amplifier
Channel Count 2 channels

主な差別化要因

  • Two independently usable gain-control paths in one device (vs Single-channel VGA candidates)
  • Broad gain adjustment for signal normalization (vs Fixed-gain amplifier candidates)
  • Wideband, low-noise signal conditioning positioning (vs General-purpose fixed or limited-gain amplifiers)

設計ノート

Route the two amplifier channels as controlled-impedance paths and keep their gain-control connections away from sensitive inputs. Place local bypass capacitors at the supply pins and maintain a continuous return plane under and around the device. Because the AD60000 is a wideband dual VGA, small parasitic areas and unintended feedback paths can affect channel behavior. Review the final placement against the manufacturer's recommended layout and the package drawing before fabrication.

Do not treat a nominally similar variable-gain amplifier as a board-level replacement without checking all 20 package pins. Verify footprint dimensions, pin numbering, input and output assignments, supply connections, grounding, and the gain-control interface. Also compare the intended 0 dB to +40 dB operating range with the candidate's noise, bandwidth, output swing, and control stability. A functional match without these checks can require schematic and PCB changes.

Keep each amplifier channel within its specified input and output signal limits, and use the manufacturer-defined supply voltage without substitution. Decoupling capacitors should be placed directly between each relevant supply pin and ground rather than gathered at a remote point. Confirm headroom at 0 dB and at +40 dB, where the nominal voltage gain reaches 100 V/V, since the usable output range may become the limiting factor before the amplifier itself reaches its maximum gain setting.

Evaluate gain-control bandwidth and settling behavior as part of the complete signal chain, particularly when a sudden input-level change can move the channel across much of its 0 dB to +40 dB range. Use controlled termination and impedance matching at both amplifier interfaces. For dual-channel systems, assess channel-to-channel timing and amplitude consistency if the two outputs are combined, differenced, or used for phase-sensitive measurements.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

One product listing states that RoHS is not applicable, but no manufacturer compliance declaration was identified, so all compliance fields remain unknown.

データ検証日: 2026-11-03 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AD60000 datasheet AD60000 pinout AD60000 datasheet pdf AD60000 equivalent AD60000 replacement AD60000 cross reference AD60000 drop-in replacement AD60000 price AD60000 stock Analog Devices AD60000 AD60000 20 pin amplifier AD60000 variable gain amplifier

関連部品&用語

Analog Devices AD60000 dual variable gain amplifier VGA variable gain amplifier amplifier IC signal conditioning RF receiver IF conditioning communications receiver instrumentation test and measurement gain range 0 dB gain +40 dB gain 100 V/V voltage gain low noise wideband 20-pin package gain control analog signal dual channel
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示