Analog Devices

AD600JN - 35MHz Dual VGA for Ultrasound | Analog Devices

部品番号: AD600JN ✓ 生産中
±5.25 V Vdss 16-lead PDIP Package
MOQ: 1 |

AD600JN 概要

The Analog Devices AD600JN is a dual-channel, low-noise, wideband variable gain amplifier with a 35 MHz gain-bandwidth product, optimized for ultrasound imaging and other precision signal-chain applications. It operates from dual ±5.25 V supplies and is packaged in a 16-lead PDIP. Each amplifier channel provides programmable gain through an external gain-control network, allowing received signals to be conditioned before digitization.

A variable gain amplifier, or VGA, is an amplifier whose voltage gain can be adjusted over a specified range. It sits between a low-level sensor or receiver and a downstream converter, processor, or display system. In the signal-chain hierarchy, a VGA belongs to the broader amplifier and analog integrated-circuit categories. Unlike a fixed-gain amplifier, it supports signal-level adjustment without requiring multiple physical gain stages.

The AD600JN combines two independent amplifier channels, low-noise operation, wide bandwidth, and adjustable gain in one device. Its 35 MHz gain-bandwidth product is particularly useful for ultrasound systems that process wideband return signals. The dual-channel organization reduces the number of separate amplifier packages required when two receive paths must be handled. A gain-control resistor or related network sets the operating gain, allowing the circuit to accommodate signals occupying a broad dynamic range.

Analog Devices describes the AD600 family as being optimized for ultrasound imaging while remaining applicable to systems that require precise gain, low noise, low distortion, and wide bandwidth. Its dual architecture supports parallel channels and can simplify analog-board layout when two signals require similar conditioning. The AD600 family is also associated with the closely related AD6021 dual variable gain amplifier, providing a basis for comparing gain-setting, bandwidth, and control requirements during component selection.

Typical uses include ultrasound receiver front ends, medical imaging signal chains, high-speed instrumentation, wideband AGC circuits, and communications receivers. In ultrasound equipment, the device can amplify a weak piezoelectric return signal before antialias filtering and conversion. In test equipment, programmable gain can simplify level control across multiple measurement ranges, provided the selected gain remains within the amplifier’s bandwidth and output-drive limits.

The principal design consideration is the relationship among signal bandwidth, programmed gain, supply voltage, output swing, and downstream converter limits. Check the manufacturer datasheet for the exact gain-control equation, gain range, noise, distortion, slew rate, settling behavior, and allowable input levels. PCB layout should minimize feedback-loop area, maintain symmetric return paths for the dual channels, and place gain-setting and bypass components close to the device.

This page combines the AD600JN family description, package information, commercial sourcing guidance, engineering application guidance, and replacement analysis. It is intended to help designers confirm fit, establish the correct operating region, and decide when a different Analog Devices package or family member is more appropriate than a literal board-level substitution.

ドロップイン代替品: AD600JN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: AD600JN (同一形状・フットプリント) — 相違点: Number of Channels, Operating Temperature Range, Package, Signal Type.

Analog Devices
Number of Channels: 2 circuits
Operating Temperature Range: -40 °C to +85 °C
Package: 16-pin PDIP
比較対象 AD600JN →

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

AD600JN 最大定格&電気的特性

Product Type Dual variable gain amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 35 MHz
電源電圧 ±5.25 V
動作温度範囲 0°C to +70°C
パッケージ 16-lead PDIP
実装タイプ Through-hole
Signal Type Single-ended

AD600JN 16-lead pdip ピン配置ガイド

AD600JN (16-lead pdip パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AD600JN の 16-lead pdip パッケージピン配置図

詳細なピン配置データはありません: AD600JN.

詳細は データシート をご参照ください。

主な用途

AD600JN の用途: 6 件s: Ultrasound Receiver Front End, Medical Imaging Signal Conditioning, Programmable Test and Measurement Front End, Wideband Communications Receiver, Automatic Gain Control Signal Chain, High-Speed Sensor Signal Conditioning.

💊

Ultrasound Receiver Front End

The AD600JN fits dual-channel ultrasound receiver paths because it combines two adjustable-gain amplifiers with a 35 MHz gain-bandwidth product in one 16-lead PDIP package. Each channel can condition a weak piezoelectric return signal before antialias filtering and digitization, reducing the need for separate gain stages. The dual arrangement also allows two receivers to be conditioned in parallel while keeping the control network organized around matching channels. The key design check is usable bandwidth at the selected gain: higher closed-loop gain reduces bandwidth, so the family gain-versus-bandwidth limits should be evaluated against the transducer and converter bandwidth. Output swing, slew rate, and settling must also be compared with the signal amplitude and sampling timing.

💊

Medical Imaging Signal Conditioning

AD600JN is applicable to medical imaging systems that need two related receive signals to undergo precise level adjustment. Its dual ±5.25 V architecture and adjustable gain are useful ahead of a sampling chain, while the 35 MHz gain-bandwidth product provides bandwidth for wideband transducer information. In an ultrasound scanner, the device can sit after front-end protection and buffering and before anti-alias filtering or an ADC. Its commercial 0°C to +70°C grade must match the intended enclosure temperature range. Because medical equipment requires controlled risk and validated performance, designers should confirm operating limits, noise, distortion, stability, and regulatory suitability within the complete system rather than treating the amplifier as a stand-alone safety component.

🔧

Programmable Test and Measurement Front End

The AD600JN can form the adjustable-gain stage of a wideband test fixture or instrumentation channel. Programmable attenuation and amplification allow the same input path to cover several signal ranges, while the two internal channels can support differential or paired measurements. The 35 MHz gain-bandwidth product gives the design headroom for moderate-frequency signals, although the selected gain determines the usable closed-loop bandwidth and transient performance. The ±5.25 V supply arrangement supports bipolar signal handling around ground. Engineers should verify output-current capability, slew rate, noise density, distortion, and settling time against the instrument’s bandwidth and accuracy specifications. Clean grounding, short gain-control paths, and adequate supply bypassing remain essential for repeatable measurements.

🌐

Wideband Communications Receiver

AD600JN can serve as a receive-chain gain-control stage in communications equipment that receives signals over a substantial frequency range. Adjustable gain helps reconcile weak and strong signal levels before filtering, conversion, or demodulation, and the dual channels can process related I/Q or differential paths. The 35 MHz gain-bandwidth product makes the device relevant to broadband intermediate-frequency or baseband conditioning rather than only narrow-band audio. Gain must be programmed low enough to preserve stability and adequate bandwidth, while the output must remain within the amplifier’s swing and drive limits. Designers should also evaluate noise, distortion, group-delay behavior, and settling using the manufacturer data rather than inferring performance solely from the gain-bandwidth product.

📡

Automatic Gain Control Signal Chain

The AD600JN is suitable for an automatic gain control loop because its variable-gain behavior allows a controller to adjust signal level according to input strength. The dual-channel organization can process two synchronized or complementary signals with independently established gains, although feedback-loop interaction must be carefully assessed. A practical implementation can place the AD600JN before a detector and comparator, then feed a control signal back to the gain-setting network. The 35 MHz gain-bandwidth product supports fast signal conditioning, but loop stability depends on detector delay, gain-control slope, filtering, and the amplifier’s closed-loop response. Use the manufacturer’s recommended gain-control network and characterize loop settling across temperature and supply tolerances to avoid oscillation or overshoot.

🧩

High-Speed Sensor Signal Conditioning

AD600JN can condition signals from sensors whose output amplitude varies substantially across the operating range. Programmable gain lets the downstream instrument retain more usable dynamic range, and the dual architecture can support two sensors or complementary sensor outputs. The 35 MHz gain-bandwidth product supports moderate-bandwidth sensing systems, while dual ±5.25 V operation allows a bipolar signal path around ground. In a practical circuit, place the amplifier after the sensor buffer and input protection and before conversion or filtering. Validate that the programmed gain does not exceed the device’s bandwidth, output swing, and settling limits. Low-noise performance and stable gain-control components are essential when weak sensor outputs and small dynamic-range changes must be measured accurately.

おすすめ製品の概要

AD6021 Closely related dual variable gain amplifier family member 使用用途: Ultrasound Receiver Front End, Medical Imaging Signal Conditioning, Programmable Test and Measurement Front End, Wideband Communications Receiver, Automatic Gain Control Signal Chain, High-Speed Sensor Signal Conditioning AD600ARZ Surface-mount AD600 family implementation 使用用途: Ultrasound Receiver Front End, Medical Imaging Signal Conditioning, Programmable Test and Measurement Front End, Wideband Communications Receiver, Automatic Gain Control Signal Chain, High-Speed Sensor Signal Conditioning
What is the AD600JN?
The AD600JN is a dual-channel, low-noise, wideband variable gain amplifier with a 35 MHz gain-bandwidth product, supplied in a 16-lead PDIP. Analog Devices positions the AD600 family for ultrasound imaging and other applications requiring adjustable gain, low noise, low distortion, and wide bandwidth. Each of its two channels can be adjusted independently through the gain-control circuitry described in the manufacturer datasheet.
What is the operating voltage of AD600JN?
The AD600JN operates from dual ±5.25 V supplies, providing a 10.5 V total supply span. According to the Analog Devices AD600 product page, the AD600J/AD602J grade is specified for a 0°C to +70°C ambient temperature range. Designers should use the manufacturer datasheet’s absolute-maximum and supply-sequencing tables when checking board-level fault conditions.
Where to download the AD600JN datasheet PDF?
The AD600JN datasheet and product information are available from the official Analog Devices AD600 product page at https://www.analog.com/en/products/ad600.html. That page links the manufacturer data sheet and product-selection information for the AD600 family. Use the family document because AD600JN is the 16-lead PDIP, commercial-temperature-grade ordering option within that family.
Where can I find the AD600JN pinout?
The AD600JN pin assignment should be taken from the pin-description table in the Analog Devices AD600 family datasheet. The component is a 16-lead PDIP, and the package diagram identifies the physical lead positions and electrical functions. Before assigning PCB tracks, confirm every supply, ground, input, output, and gain-control connection directly against the current manufacturer document.
What are the key specifications of AD600JN that engineers should know?
The principal AD600JN specifications are two amplifier channels, a 35 MHz gain-bandwidth product, dual ±5.25 V operation, a 16-lead PDIP package, and a 0°C to +70°C commercial operating-temperature range. The device also supports adjustable gain for ultrasound and other wideband signal-chain applications. Exact gain range, noise density, distortion, slew rate, and settling time should be read from the AD600 family datasheet.
Is AD600JN suitable for ultrasound imaging?
Yes, AD600JN is specifically optimized for ultrasound imaging systems. Its dual-channel architecture can condition two receive paths, while the 35 MHz gain-bandwidth product supports wideband ultrasound signals and its adjustable gain handles differing return-signal levels. The actual usable bandwidth depends on the programmed gain, so the gain-versus-bandwidth limits in the manufacturer datasheet must govern the design.
What can replace AD600JN?
A direct replacement must use a 16-lead PDIP footprint, match the AD600JN’s two-channel gain-control architecture, and preserve the required ±5.25 V operating conditions and 35 MHz class of bandwidth. Analog Devices offers the closely related AD6021 dual variable gain amplifier, but it should be treated as a functional redesign candidate until its gain-control interface, pinout, electrical limits, and stability requirements are checked against AD600JN.
Is AD600JN the same as AD600ARZ?
No. AD600JN and AD600ARZ belong to the same AD600 family and are described as having closely related specifications, but they use different packages. AD600JN is specified as a 16-lead PDIP, whereas AD600ARZ is a 16-lead SOIC. Consequently, AD600ARZ is not a literal drop-in replacement for an existing AD600JN board because its lead geometry differs.
AD600JN vs AD600ARZ – which is better for an ultrasound board?
Choose AD600JN when the existing design uses a through-hole 16-lead PDIP footprint and the commercial 0°C to +70°C grade is acceptable. Choose AD600ARZ when the board uses surface-mount 16-lead SOIC routing. The two parts are closely related family members, but package geometry is the decisive mechanical difference; their gain ranges, control interfaces, and electrical limits should still be compared from the manufacturer documentation.
When should I choose AD600JN over AD600ARZ?
Choose AD600JN over AD600ARZ when PCB compatibility, prototype assembly, or a through-hole repair process makes the 16-lead PDIP footprint the deciding factor. Choose AD600ARZ for a new surface-mount design where the smaller SOIC footprint is preferred. Neither choice should be based only on the shared AD600 family name; verify the gain-control method, gain range, stability, and temperature grade for the specific circuit.
What is the best cross-brand equivalent for AD600JN?
No cross-brand equivalent is established as a literal drop-in replacement for AD600JN. A substitute must match the 16-lead PDIP footprint, dual ±5.25 V operation, adjustable-gain interface, bandwidth, noise, distortion, and stability requirements, not merely the generic “variable gain amplifier” description. Use the Request a Quote form on this page for sourcing help, and request manufacturer documentation before approving any cross-brand substitution.
What is the AD600JN price?
Current commercial pricing for AD600JN should be requested through the Request a Quote form on this page because prices and inventory can change with order quantity and sourcing conditions. The form is the appropriate route for a firm quotation, minimum-order information, and scheduled delivery. Confirm that the quote identifies the AD600JN ordering code and the required package and delivery configuration.
What is the lead time for AD600JN?
The current lead time for AD600JN depends on supplier inventory, manufacturing status, order quantity, and delivery terms. Use the Request a Quote form on this page to request current lead-time and minimum-order information for the exact AD600JN part number. For production planning, also request a dated supply commitment rather than relying on an unconfirmed stock estimate.
Is AD600JN in stock?
Current AD600JN stock status should be confirmed through the Request a Quote form on this page. The form can connect the requested quantity with available inventory and a current delivery schedule. Because availability can change after a search result is generated, a purchasing decision should use a live quotation and acknowledgment of the requested order quantity.
How should AD600JN gain and bandwidth be selected together?
AD600JN should be selected by checking the manufacturer’s gain-versus-bandwidth limits rather than using the 35 MHz gain-bandwidth product as a flat passband at every gain setting. Increasing closed-loop gain generally narrows usable bandwidth, while high-speed ultrasound signals also require sufficient slew rate and output swing. Choose the programmed gain from the signal-chain requirement and verify settling, distortion, and stability from the datasheet.

エンジニアリング参考データ: AD600JN — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose AD600JN when the design needs two independently adjustable-gain channels, a 35 MHz gain-bandwidth product, dual ±5.25 V operation, and a 16-lead PDIP footprint. It is especially appropriate for ultrasound receiver circuitry and through-hole prototypes where the commercial 0°C to +70°C grade is suitable. AD600ARZ should be selected for a new surface-mount design because its SOIC package is mechanically different and therefore not a drop-in replacement for an existing DIP board. Consider AD6021 when its gain-control method, gain range, bandwidth behavior, and pinout provide a better match, but verify every interface rather than assuming family-level equivalence. No other same-package replacement is established here. Regardless of the selected family member, verify usable bandwidth at the programmed gain, output swing, noise, distortion, settling, stability, and temperature range against the complete signal chain.

代替品との比較

パラメータ この製品
Package 16-lead PDIP
Brand Analog Devices
Amplifier Type Variable gain amplifier
Number of Channels 2 channels
— 35 MHz
Supply Voltage ±5.25 V
Operating Temperature Range 0°C to +70°C
Mounting Type Through-hole
Primary Target Application Ultrasound imaging and wideband signal conditioning

主な差別化要因

  • Dual adjustable-gain channels in one package (vs AD600ARZ)
  • Ultrasound-oriented variable-gain architecture (vs AD6021)
  • Commercial-temperature PDIP implementation (vs AD600ARZ)

設計ノート

Keep the gain-control network, input paths, outputs, and decoupling capacitors close to the AD600JN pins to minimize parasitic feedback and loop-area problems. Route the two channels symmetrically where channel matching matters, and keep high-impedance gain-control nodes away from switching nodes and clock lines. Place ground-return paths directly beneath the device and ensure that supply bypass connections use the shortest practical loops.

Select the programmed gain by jointly reviewing closed-loop bandwidth, slew rate, settling time, output swing, and distortion; the 35 MHz gain-bandwidth product is not a guarantee of 35 MHz usable bandwidth at every gain. Maintain the required gain-control resistance and compensation values specified by Analog Devices. After layout assembly, verify channel stability and frequency response across the full input range and the 0°C to +70°C operating range.

Do not treat AD600ARZ as a board-level substitute for AD600JN because one uses a 16-lead SOIC and the other uses a 16-lead PDIP. Also avoid assuming that the AD6021 is interchangeable without comparing its gain-control equation, gain range, pin assignment, stability network, and electrical limits. Verify supply sequencing, bypass requirements, exposed input and output limits, and the recommended gain-control component values against the current manufacturer datasheet.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The AD600 family is described as a commercial-temperature 0°C to +70°C part, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified. AEC-Q100 is not applicable to the identified commercial-temperature component.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AD600JN datasheet AD600JN datasheet pdf AD600JN pinout AD600JN equivalent AD600JN replacement AD600JN cross reference AD600JN vs AD600ARZ AD600JN vs AD6021 AD600JN 16-DIP package AD600JN 35MHz variable gain amplifier AD600JN ultrasound amplifier AD600JN price AD600JN stock Analog Devices AD600JN ad600 pro

関連部品&用語

Analog Devices AD600JN AD600 AD6021 AD600ARZ variable gain amplifier VGA dual amplifier analog integrated circuit amplifier IC semiconductor gain-bandwidth product 35 MHz dual ±5.25 V supply 16-lead PDIP DIP package through-hole mounting ultrasound imaging medical imaging automatic gain control signal conditioning gain control output swing settling time low-noise amplification
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示