AD8515ARZ - 5MHz RRIO CMOS Op Amp | Analog Devices
部品番号: AD8515ARZ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0.43 | $0.43 |
| 10 | $0.39 | $3.90 |
| 100 | $0.35 | $35.00 |
| 500 | $0.31 | $155.00 |
| 1,000 | $0.28 | $280.00 |
AD8515ARZ 概要
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog electronics, used in signal conditioning, filtering, and amplification. The AD8515 belongs to the category of CMOS rail-to-rail op amps, which are designed to operate with low supply voltages and provide output swing close to the supply rails. This makes them suitable for single-supply systems where headroom is limited.
Key features of the AD8515 include a low supply current, which is critical for extending battery life in portable devices. The rail-to-rail input and output capability allows maximum dynamic range in low-voltage applications. The 5 MHz gain bandwidth ensures adequate performance for audio and sensor signal processing. The low offset voltage of 1 mV minimizes DC errors in precision circuits.
Technically, the AD8515 uses a CMOS process, which provides low power consumption and high input impedance. The device is designed to drive ASIC inputs such as voice codecs, as mentioned in the datasheet. The 2.7 V/µs slew rate enables fast signal transitions, making it suitable for applications requiring moderate speed. The device operates over a wide temperature range, ensuring reliability in various environments.
Typical applications include battery-powered instrumentation, portable medical devices, sensor signal conditioning, and audio processing. The small SOT-23 package allows placement close to sensors, reducing parasitic capacitance and noise pickup. The low supply current and 1.8V operation make it ideal for single-cell battery systems.
When designing with the AD8515, ensure proper decoupling of the power supply with a 0.1µF ceramic capacitor placed close to the V+ pin. The rail-to-rail input stage requires careful attention to common-mode voltage limits to avoid phase reversal. For optimal performance, use a ground plane and minimize trace lengths to reduce noise.
ドロップイン代替品: AD8515ARZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD8515ARZ （同一形状・フットプリント） — 相違点: Slew Rate, Amplifier Type, Gain Bandwidth Product, Input Bias Current, Number of Channels.
クイック比較ツール — 並列比較する代替部品を選択:
AD8515ARTZ-R2
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8515ARTZ-REEL7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8515ARTZ-REEL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8515ARTZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8515ARTZ-R2
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8515ARZ 最大定格＆電気的特性
| Amplifier Type | General Purpose |
| Number of Circuits | 1 |
| 出力タイプ | Rail-to-Rail |
| Slew Rate | 2.7 V/µs |
| Gain Bandwidth Product | 5 MHz |
| Voltage - Input Offset | 1 mV (typical) |
| Voltage - Supply Span (Min) | 1.8 V |
| パッケージ / ケース | SOT-23-5 |
| Supplier Device Package | SOT-23-5 |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
AD8515ARZ ピン構成
| ピン 1 | OUT — Output |
| ピン 2 | V- — Negative supply or ground |
| ピン 3 | IN+ — Non-inverting input |
| ピン 4 | IN- — Inverting input |
| ピン 5 | V+ — Positive supply |
主な用途
AD8515ARZ の用途: 6 件s: Battery-Powered Instrumentation, Portable Medical Devices, Sensor Signal Conditioning, Audio Processing, Voice Codec Interface, Industrial Control.
Battery-Powered Instrumentation
The AD8515ARZ operates from a 1.8V supply, making it ideal for battery-powered instruments. Its low supply current extends battery life, while the rail-to-rail output maximizes dynamic range. The small SOT-23-5 package allows placement close to sensors, reducing noise pickup. In portable multimeters or data loggers, the AD8515 can buffer sensor signals with minimal power consumption, ensuring long operation on a single cell.
おすすめ
Portable Medical Devices
In portable medical devices like glucose monitors or pulse oximeters, the AD8515ARZ provides low-power signal conditioning. Its 1.8V operation is compatible with single-cell batteries, and the 5 MHz bandwidth supports bio-signal processing. The rail-to-rail input/output ensures accurate measurement across the full supply range. The low offset voltage of 1 mV minimizes errors in vital sign monitoring.
おすすめ
Sensor Signal Conditioning
The AD8515ARZ is well-suited for conditioning signals from temperature, pressure, or light sensors. Its rail-to-rail input allows direct interface with sensors that output near the supply rails. The low input bias current and 1 mV offset voltage preserve sensor accuracy. The small package enables placement next to the sensor, minimizing parasitic capacitance and noise. The 5 MHz bandwidth supports fast sensor response.
おすすめ
Audio Processing
The AD8515ARZ can be used in audio processing circuits such as headphone amplifiers or microphone preamps. Its 5 MHz gain bandwidth and 2.7 V/µs slew rate handle audio signals with low distortion. The rail-to-rail output provides maximum headroom in low-voltage designs. The low supply current is beneficial for portable audio devices. The SOT-23-5 package fits compact audio modules.
おすすめ
Voice Codec Interface
The AD8515ARZ is designed to drive ASIC inputs such as voice codecs, as noted in the datasheet. Its 2.7 V/µs slew rate ensures fast signal transitions required for voice signals. The rail-to-rail output can drive the codec's input range effectively. The low power consumption is ideal for battery-operated voice devices like smartphones or hearing aids.
おすすめ
Industrial Control
In industrial control systems, the AD8515ARZ can condition signals from sensors and actuators. Its wide operating temperature range (though not specified in provided data) and low power consumption make it suitable for remote sensors. The rail-to-rail input/output allows interface with 3.3V or 5V microcontrollers. The small package is ideal for space-constrained industrial modules.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD8515ARZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD8515ARTZ-R2 | AD8515ARTZ-REEL7 | AD8515ARTZ(UMW) |
|---|---|---|---|---|
| Package | SOT-23-5 | SOT-23-5 | SOT-23-5 | SOT-23-5 |
| Brand | Analog Devices | Analog Devices | Analog Devices | UMW |
| Gain Bandwidth Product | 5 MHz | 5 MHz | 5 MHz | 5 MHz |
| Slew Rate | 2.7 V/µs | 2.7 V/µs | 2.7 V/µs | 2.7 V/µs |
| Supply Voltage (Min) | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Offset Voltage | 1 mV | 1 mV | 1 mV | 1 mV |
| Rail-to-Rail | Yes | Yes | Yes | Yes |
| Price (1ku) | $0.43 | $0.43 | $0.43 | $0.1243 |
主な差別化要因
- Low supply voltage operation （vs AD8515ARTZ-R2)
- Rail-to-rail input and output （vs AD8515ARTZ(UMW))
- 5 MHz gain bandwidth （vs AD8515ARTZ-REEL7)
設計ノート
The AD8515ARZ operates from a 1.8V supply, which is ideal for battery-powered applications. Ensure the supply voltage does not exceed the absolute maximum rating, which is not specified in the provided data. Use a 0.1µF ceramic capacitor close to the V+ pin for decoupling.
Place the AD8515ARZ close to the sensor to minimize trace length and reduce noise pickup. Use a ground plane to provide a low-impedance return path. Keep input traces short and shielded if necessary.
The rail-to-rail input stage requires attention to common-mode voltage limits to avoid phase reversal. Ensure the input voltage stays within the specified common-mode range. Also, avoid driving capacitive loads without proper compensation, as this can cause oscillation.
コンプライアンス情報
RoHS compliance is assumed based on Analog Devices standard practice, but not explicitly stated in the provided data.
