AD9032BZ - 12-Bit 25.6 MSPS ADC | Analog Devices
部品番号: AD9032BZ ✓ 生産中AD9032BZ 概要
An ADC is an analog-to-digital converter, a mixed-signal semiconductor that samples a continuous analog voltage and converts it into a numeric code for processing, storage, or transmission. The AD9032 belongs to the data-converter IC hierarchy and combines a sampling track-and-hold stage, internal references, conversion timing, and a parallel output interface in one package. This integration reduces the number of external support components required in high-speed instrumentation.
The AD9032BZ provides 12-bit resolution and conversion rates from DC to 25.6 MSPS. Its differential bipolar input spans -1.024 V to 1.024 V, while the device operates from a nominal 5 V supply. The converter also provides 74 dB spurious-free dynamic range to 12 MHz. These characteristics balance quantization performance against the throughput required for radar, communications, spectrum analysis, and medical instrumentation.
Internally, the AD9032 uses a subranging converter architecture to achieve high conversion speed while retaining 12-bit output resolution. The onboard track-and-hold, references, and timing circuits support a compact, coordinated signal chain. The 40-pin hybrid package provides the analog, digital, reference, and clock connections needed for operation, while the ECL-compatible output interface supports high-speed digital capture systems.
Typical applications include radar and signal-intelligence receivers, digital spectrum analyzers, communications receivers, medical diagnostic equipment, and instrumentation requiring 12-bit conversion at rates up to 25.6 MSPS. For these systems, the AD9032BZ can capture a wide input bandwidth and represent sampled voltages with 12-bit granularity. Its integrated timing and reference functions also reduce board-level implementation complexity.
A primary design consideration is that the 3.8 W power rating requires attention to thermal management, supply integrity, and high-speed layout. Input and digital-return paths should be controlled to preserve the stated dynamic performance, while clocking and data-capture timing must be designed around the converter's operating rate. The manufacturer's product page and datasheet should be consulted for the complete pin arrangement, timing diagrams, and application recommendations.
This product summary combines verified manufacturer specifications, distributor pricing, compatibility information, and practical selection guidance. It distinguishes confirmed drop-in options from generic cross-reference tools and highlights the thermal, signal-integrity, and clocking constraints engineers must evaluate when integrating this high-speed converter.
ドロップイン代替品: AD9032BZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
AD9034
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD9032BZ 最大定格＆電気的特性
| Converter Type | 12-bit analog-to-digital converter |
| Architecture | Subranging converter |
| Maximum Conversion Rate | 25.6 MSPS |
| Conversion Speed Range | DC to 25.6 MSPS |
| 分解能 | 12 bit |
| Input Type | Bipolar differential analog input |
| Analog Input Range | -1.024 V to 1.024 V |
| Input Span | 1.024 V |
| Nominal Supply Voltage | 5 V |
| Power Consumption | 3.8 W |
| Spurious-Free Dynamic Range | 74 dB to 12 MHz |
| Track-and-Hold | Onboard |
| Voltage References | Onboard |
| Timing Circuits | Onboard |
| Output Interface | ECL-compatible |
| Package Type | 40-pin hybrid ceramic flat package |
| Terminal Count | 40 |
| Package Code | DFP |
| Package Shape | Rectangular |
| Mounting Form | Flat |
| RoHS ステータス | unknown |
| REACH Status | unknown |
AD9032BZ rectangular ピン配置ガイド
AD9032BZ (rectangular パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD9032BZ.
詳細は データシート をご参照ください。
主な用途
AD9032BZ の用途: 6 件s: Radar Signal Acquisition, Digital Spectrum Analyzers, Communications Receivers, Medical Diagnostic Equipment, Signal Intelligence Equipment, High-Speed Test and Measurement.
Radar Signal Acquisition
The AD9032BZ fits radar receivers that require rapid sampling of intermediate-frequency or other analog signals with controlled spectral performance. Its 12-bit resolution and conversion rate from DC to 25.6 MSPS support wide-band acquisition, while the 74 dB spurious-free dynamic range to 12 MHz helps preserve signal integrity. The converter is placed in the receiver's analog acquisition chain, with its onboard track-and-hold, references, and timing functions reducing external coordination. Because the device consumes 3.8 W, designers must also account for clock jitter, ECL-compatible output timing, data-capture bandwidth, and thermal dissipation.
おすすめ
Digital Spectrum Analyzers
The AD9032BZ is suitable for digital spectrum analyzers that need to capture enough bandwidth to observe RF or IF signals while retaining 12-bit numerical resolution. Operation at up to 25.6 MSPS allows direct sampling of a wider band than a 20 MSPS-class converter. Its 74 dB spurious-free dynamic range to 12 MHz helps separate wanted spectral content from converter-generated spurs. In an analyzer front end, the ADC can feed parallel capture logic, but the layout must minimize clock and return-path noise, preserve output timing, and remove the specified 3.8 W of heat without introducing vibration or temperature drift.
おすすめ
Communications Receivers
The AD9032BZ can serve in communications receiver and signal-analysis equipment requiring high-rate conversion of a bipolar analog waveform. Its 25.6 MSPS maximum rate provides design margin for wideband IF sampling, while 12-bit resolution gives the downstream demodulator or digital processor a useful balance of dynamic range and data throughput. The onboard track-and-hold, voltage references, and timing circuits support a compact analog front end. Engineers should synchronize the converter carefully to the capture system, preserve the differential input impedance and range of -1.024 V to 1.024 V, and provide thermal paths for the 3.8 W power consumption.
おすすめ
Medical Diagnostic Equipment
The AD9032BZ can support medical diagnostic and measurement systems that sample bipolar physiological or instrument signals at high speed. Its 12-bit resolution and 74 dB spurious-free dynamic range to 12 MHz provide useful signal fidelity when the measured content lies within the converter's specified bandwidth. The integrated track-and-hold, references, and timing circuits make the converter appropriate for compact multi-channel acquisition systems when each channel has suitable drive circuitry. A medical design must verify noise behavior, isolation, safety requirements, and system calibration, while also controlling the 3.8 W thermal load and keeping high-speed switching away from sensitive analog paths.
おすすめ
Signal Intelligence Equipment
The AD9032BZ is appropriate for signal-intelligence front ends that rapidly digitize complex analog waveforms. Its maximum 25.6 MSPS conversion rate supports high-throughput sampling, and the 12-bit output format avoids the data burden of a higher-resolution converter while retaining useful dynamic range. The 74 dB spurious-free dynamic range to 12 MHz helps limit unwanted spectral components in captured data. In a deployed system, the ADC should be surrounded by controlled-impedance routing, low-noise references, stable clocking, and ECL-compatible capture logic. Thermal planning is equally important because the 3.8 W rating can constrain enclosure density and sustained acquisition duration.
おすすめ
High-Speed Test and Measurement
The AD9032BZ can be used in high-speed instrumentation that captures transient or repetitive analog waveforms requiring up to 25.6 MSPS sampling. Its 12-bit resolution is suitable for measurement systems in which numerical precision must be balanced against conversion speed and output volume, while the 74 dB spurious-free dynamic range to 12 MHz assists measurements in the upper stated frequency band. The onboard timing and reference circuits simplify integration, but the ECL-compatible output must be connected to capture hardware with adequate timing margin. Designers should also provide regulated supply, low-noise grounding, thermal copper, and short controlled-impedance routes to preserve converter performance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD9032BZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD9034 |
|---|---|---|
| Package | 40-pin hybrid ceramic flat package | 40-pin hybrid ceramic flat package |
| Brand | Analog Devices | Analog Devices |
| Maximum Conversion Rate | 25.6 MSPS | 20 MSPS |
主な差別化要因
- Higher maximum conversion rate （vs AD9034)
- Verified 12-bit signal representation （vs AD9034)
- Integrated high-speed conversion functions （vs AD9034)
設計ノート
Plan for the verified 3.8 W device power when designing the converter's thermal path. Use the manufacturer's package and application guidance for the final heat-spreader or copper-area arrangement, and keep temperature-sensitive analog components away from the hottest region. The provided data does not include junction temperature, ambient limits, or package thermal resistance, so those values must be obtained from the manufacturer datasheet before calculating operating margins.
Treat the clock, analog input, and ECL-compatible output paths as controlled high-speed interfaces. Keep routing short, provide a continuous reference plane, use impedance-appropriate geometry where applicable, and minimize return-path discontinuities. Use the manufacturer's pinout and recommended decoupling arrangement before assigning components; individual pin names and supply requirements are not present in the supplied verified data.
Separate the bipolar analog input from digital output and clock routing to reduce coupling into the converter. Keep the sampling network symmetric where the recommended circuit calls for it, provide local return paths, and avoid placing noisy switching stages near the ADC. Validate the completed board with time-domain and frequency-domain measurements, particularly where 74 dB spurious-free dynamic range to 12 MHz is a system requirement.
Do not treat the AD9034 pin compatibility statement as proof that every AD9032 timing and power requirement is unchanged. AD9032 reaches 25.6 MSPS, while AD9034 is specified up to 20 MSPS. If substituting AD9034, confirm output timing, clock requirements, input bandwidth, thermal loading, and acquisition bandwidth in the manufacturer documentation before releasing the PCB or updating production quantities.
コンプライアンス情報
The supplied verified data does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because this product is an analog-to-digital converter rather than an automotive-qualified device designation in the provided data.
