AD977CRRL - 16-Bit 100 kSPS SAR ADC | Analog Devices
部品番号: AD977CRRL ✓ 生産中AD977CRRL 概要
An ADC is an interface component that bridges the analog and digital domains. A SAR ADC compares the sampled input against an internal reference through a sequence of binary-weighted trials, progressively resolving the analog voltage. In the broader product hierarchy, the AD977CRRL is an ADC, a data-acquisition IC, a signal-conversion semiconductor, and a member of the Analog Devices high-speed, low-power converter family. SAR architecture is suited to applications that need accurate conversion without the complexity of pipeline stages.
Key features include 16-bit resolution, one analog input, a 100 kSPS conversion rate, a single 5 V supply, and a 20-lead SOIC package. The 100 kSPS rate supports acquisition of high-frequency or rapidly changing signals while retaining the straightforward control and data handling characteristics of a SAR converter. A single-supply arrangement can also simplify power-system design when the converter is already operating from a 5 V rail. The 20-lead SOIC footprint supports conventional surface-mount assembly and thermal management through its exposed lead geometry.
The converter architecture provides deterministic sampling behavior suited to control loops, instrumentation, signal measurement, and embedded acquisition systems. Data handling depends on the device interface and operating clock, so system timing should be evaluated against the manufacturer's timing tables. When designing a new board, check the complete pin-description table, recommended reference circuitry, input range, acquisition timing, and digital interface levels before assigning signal and return paths.
Typical uses include industrial process monitoring, sensor-interface measurements, communications equipment, test and measurement instruments, audio signal acquisition, and embedded control systems. The AD977CRRL is particularly appropriate when a 16-bit converter, 100 kSPS throughput, and 5 V operation satisfy the acquisition requirements without requiring a multi-supply converter.
For layout, place the reference and decoupling components close to their associated pins and keep analog input routing short and away from fast digital clock lines. Confirm acquisition timing, input bandwidth, output logic levels, and grounding topology against the manufacturer datasheet. The AD977CRRL designation identifies the C-grade 20-lead SOIC configuration, so package dimensions and pin functions should always be checked for the exact ordering code.
ドロップイン代替品: AD977CRRL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD977CRRL (同一形状・フットプリント) — 相違点: Converter Type, Package, Architecture, Power-Down Mode.
AD977CR
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD977CRS
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD977ABRZ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD977BRZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD977ARRL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD977CRRL 最大定格&電気的特性
| Converter Type | Successive approximation register (SAR) ADC |
| 分解能 | 16 bit |
| Number of Input Channels | 1 channel |
| Throughput Rate | 100 kSPS |
| 電源電圧 | 5 V |
| Architecture | Single input, single SAR conversion channel |
| パッケージ | 20-lead SOIC |
| 実装タイプ | Surface mount |
| Lead Count | 20 leads |
AD977CRRL 20-lead soic ピン配置ガイド
AD977CRRL (20-lead soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD977CRRL.
詳細は データシート をご参照ください。
主な用途
AD977CRRL の用途: 6 件s: Industrial Process Monitoring, Sensor Signal Acquisition, Communications Equipment, Test and Measurement, Audio Signal Measurement, Embedded Control Systems.
Industrial Process Monitoring
The AD977CRRL suits industrial process monitoring where a sensor output must be digitized at 16-bit resolution and sampled at up to 100 kSPS. Place the converter behind the analog front end and reference network specified by Analog Devices, with the analog input routed directly to the designated pin. Its single 5 V supply can simplify system power when the measurement subsystem already operates from a 5 V rail. The main design checks are the permitted input range, acquisition timing, reference stability, and isolation from adjacent digital switching nodes.
おすすめ
Sensor Signal Acquisition
The 16-bit AD977CRRL can convert conditioned outputs from pressure, temperature, strain, and position sensors when a deterministic SAR sampling sequence is preferred. Its 100 kSPS throughput provides temporal resolution for changing sensor signals without requiring a pipeline converter. Use short analog traces, a quiet ground reference, and the manufacturer's recommended bypass arrangement around the IC. Gain, offset, and linearity at the system level also depend on the sensor amplifier and reference, so those components should be designed together with the converter.
おすすめ
Communications Equipment
The AD977CRRL is appropriate for communications equipment that measures envelope, power, or other analog control signals before digital processing. A 100 kSPS rate and 16-bit resolution provide a useful balance between sampling speed and converter resolution, while the single 5 V supply supports compact implementations. Care should be taken to prevent RF and digital clock signals from coupling into the analog input. Confirm input settling requirements and acquisition timing so the source impedance and external filtering are designed for the operating sample rate.
おすすめ
Test and Measurement
The AD977CRRL can serve as the acquisition converter in a bench instrument that digitizes a conditioned analog waveform. Its 100 kSPS throughput supports continuous measurement of signals within that bandwidth, and the 16-bit format preserves more numerical detail than an 8-bit or 12-bit converter. Design the input conditioner for the ADC's full-scale range and bandwidth rather than relying on the nominal bit count alone. The reference network and bypass capacitors should follow the manufacturer layout because their placement can influence offset, noise, and conversion repeatability.
おすすめ
Audio Signal Measurement
The AD977CRRL can be used in audio test and monitoring systems where a 16-bit representation is useful for level, waveform, or quality measurements. The 100 kSPS throughput is sufficient for many audio-band acquisition tasks after appropriate analog filtering, and operation from one 5 V supply simplifies portable or rack-mounted instrument design. Use an anti-alias filter and carefully ground the analog section to prevent switching or display circuitry from adding noise. The datasheet timing and AC specifications should govern the complete signal path.
おすすめ
Embedded Control Systems
The AD977CRRL can provide a high-resolution measurement channel in an embedded controller that monitors analog feedback, actuator commands, or diagnostic signals. Its 100 kSPS throughput allows relatively rapid feedback updates, while the single 5 V operation can align with a common control-system rail. Use a deterministic control sequence and confirm the serial or parallel data timing required by the connected microcontroller. The converter's reference and power bypassing should be isolated from high-current switching paths to preserve measurement quality.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD977CRRL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD977CR | AD977CRS | AD977ABRZ | AD977BRZ | AD977ARRL |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 20-SOIC | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same |
| Converter Type | Successive approximation register (SAR) ADC | Successive approximation register (SAR) ADC | Successive approximation register (SAR) ADC | Successive approximation register (SAR) ADC | Successive approximation register (SAR) ADC | Successive approximation register (SAR) ADC |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Throughput Rate | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Input Channels | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Accuracy Grade | C grade | C grade | S suffix variant | A grade; AD977CRRL has tighter INL and DNL specifications | B grade | A grade |
主な差別化要因
- C-grade accuracy selection within the AD977 family (vs AD977ABRZ)
- Direct pin-compatible family footprint (vs AD977BRZ)
- Matches the leading resolution and throughput specifications of the family (vs AD977CR)
設計ノート
Follow the Analog Devices AD977 reference layout by placing bypass and reference-network components adjacent to their designated pins. Keep the analog input trace short, use a continuous ground reference, and avoid routing it beneath or parallel to switching-node and clock traces. A quiet reference path is particularly important because reference error directly limits the accuracy available from the converter's 16-bit resolution.
Calculate the required acquisition settling time at the maximum intended conversion rate of 100 kSPS. The source impedance, external filter, reference impedance, and sampling network must settle within the converter's acquisition interval. Use the manufacturer's timing and input-capacitance guidance to select values, and validate the final board with the intended signal source rather than relying only on simulation.
Do not substitute a grade without reviewing linearity and temperature requirements. The AD977CRRL is identified as having tighter INL and DNL specifications and a wider temperature range than the AD977ABRZ candidate, while other AD977-family suffixes differ in grade or ordering format. Confirm the exact pinout, acquisition timing, input range, and electrical limits for the replacement MPN before releasing a substitution.
コンプライアンス情報
Compliance status was not stated for the exact AD977CRRL ordering code. AEC-Q100 is not applicable because AD977CRRL is an industrial analog-to-digital converter rather than an automotive-qualified device.