ADA4522-1ARZ - 55V Zero-Drift Op Amp | Analog Devices
部品番号: ADA4522-1ARZ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.12 | $2.12 |
| 10 | $1.95 | $19.50 |
| 100 | $1.72 | $172.00 |
| 500 | $1.55 | $775.00 |
| 1,000 | $1.42 | $1,420.00 |
ADA4522-1ARZ 概要
A zero-drift amplifier is a type of operational amplifier that uses auto-zeroing or chopping techniques to continuously correct offset voltage and drift, achieving near-zero offset and drift over temperature and time. This category sits within the broader hierarchy of operational amplifiers, which are fundamental building blocks in analog signal processing, instrumentation, and control systems. Zero-drift amplifiers are essential in applications where DC accuracy is critical, such as precision current sensing, thermocouple amplification, and weigh scale interfaces.
Key features of the ADA4522-1ARZ include rail-to-rail output, ground-sensing inputs (input common-mode range includes ground), and a unity-gain crossover frequency of 3 MHz typical. The low input bias current of 50 pA typical minimizes errors in high-impedance sensor circuits. The device is available in an 8-lead SOIC package (SOIC-8), which is widely used and easy to integrate into existing PCB designs. The operating temperature range is -40°C to +125°C, suitable for industrial and automotive environments.
Technically, the ADA4522-1ARZ employs a chopper-stabilized architecture that continuously corrects offset and drift, achieving superior DC performance compared to conventional op amps. The wide supply voltage range and rail-to-rail output allow direct interfacing with ADCs and other mixed-signal circuits. The low noise and high PSRR (power supply rejection ratio) ensure clean signal amplification even in noisy power environments.
Typical applications include precision current sensing in motor control, battery monitoring, and industrial process control. It is also used in medical instrumentation, such as patient monitoring and diagnostic equipment, where accuracy and reliability are paramount. The device's ability to operate from high supply voltages makes it suitable for automotive battery monitoring and power management systems.
When designing with the ADA4522-1ARZ, ensure proper decoupling of the power supply pins with 0.1 µF ceramic capacitors placed close to the device. The input common-mode range includes ground, but for best performance, keep the input voltages within the specified range. The output can swing close to the rails, but avoid heavy capacitive loads that may cause instability; use a series resistor if necessary.
ドロップイン代替品: ADA4522-1ARZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADA4522-1ARZ （同一形状・フットプリント） — 相違点: Amplifier Type, Package, Slew Rate, Supply Voltage Range, Gain Bandwidth Product.
クイック比較ツール — 並列比較する代替部品を選択:
ADA4522-1ARZ-R7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADA4522-2ARZ
✅ ドロップイン✓ 在庫あり
$3.9 / 個
データシートを見る →OPA2188AIDR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MCP6V11-E/SN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ADA4522-1ARZ 最大定格＆電気的特性
| Number of Channels | 1 |
| Supply Voltage Range | 4.5 V to 55 V |
| Dual Supply Voltage Range | ±2.25 V to ±27.5 V |
| Maximum Offset Voltage | 5 µV |
| Offset Voltage Drift | 22 nV/°C maximum |
| Voltage Noise Density | 5.8 nV/√Hz typical |
| Peak-to-Peak Noise (0.1 Hz to 10 Hz) | 117 nV p-p typical |
| Input Bias Current | 50 pA typical |
| Unity-Gain Crossover Frequency | 3 MHz typical |
| 出力タイプ | Rail-to-Rail |
| Input Common-Mode Range | Includes ground |
| 動作温度範囲 | -40°C to +125°C |
| パッケージ | 8-SOIC |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
ADA4522-1ARZ ピン構成
| ピン 1 | OUT — Output |
| ピン 2 | -IN — Inverting input |
| ピン 3 | +IN — Non-inverting input |
| ピン 4 | V- — Negative supply |
| ピン 5 | NC — No connect |
| ピン 6 | V+ — Positive supply |
| ピン 7 | NC — No connect |
| ピン 8 | NC — No connect |
主な用途
ADA4522-1ARZ の用途: 6 件s: Precision Current Sensing, Medical Instrumentation, Industrial Process Control, Automotive Battery Monitoring, Weigh Scale Interfaces, Thermocouple Amplification.
Precision Current Sensing
The ADA4522-1ARZ is ideal for precision current sensing in motor control and battery monitoring. Its ultra-low offset voltage (5 µV max) and drift (22 nV/°C) ensure accurate current measurement across a wide temperature range. The wide supply voltage (up to 55V) allows direct connection to high-voltage sense resistors without additional level shifting. The low input bias current (50 pA) minimizes errors in high-impedance shunt circuits. In a typical high-side current sense application, the op amp amplifies the small voltage across a shunt resistor, and the rail-to-rail output allows direct interface to an ADC. The zero-drift architecture maintains accuracy over time, reducing calibration requirements. For best performance, use a precision shunt resistor with low temperature coefficient and place the op amp close to the shunt to minimize parasitic inductance.
おすすめ
Medical Instrumentation
In medical devices such as patient monitors and diagnostic equipment, the ADA4522-1ARZ provides the precision and reliability required for accurate signal acquisition. Its low noise (5.8 nV/√Hz) and low offset drift ensure stable readings over time and temperature. The wide supply range (up to 55V) supports various medical power rails. The device's ground-sensing inputs allow direct connection to sensors with ground-referenced outputs. In an ECG front-end, the op amp amplifies the small biopotential signals while rejecting common-mode noise. The rail-to-rail output maximizes dynamic range for the ADC. The zero-drift architecture eliminates offset drift that could otherwise cause baseline wander. For safety, ensure proper isolation and use medical-grade power supplies.
おすすめ
Industrial Process Control
The ADA4522-1ARZ excels in industrial process control, where precision and stability are critical. Its 55V supply capability allows direct operation from 24V industrial buses. The low offset voltage and drift ensure accurate control loop feedback. The device's wide temperature range (-40°C to +125°C) suits harsh industrial environments. In a temperature controller, the op amp conditions the thermocouple signal, providing a clean amplified output to the ADC. The low noise performance prevents false triggering in control systems. The rail-to-rail output allows full-scale utilization of the ADC range. For best results, use shielded cables for sensor inputs and implement proper grounding to minimize noise.
おすすめ
Automotive Battery Monitoring
The ADA4522-1ARZ is well-suited for automotive battery monitoring systems, where high voltage and temperature extremes are common. Its 55V supply range accommodates 12V and 24V automotive systems with headroom. The zero-drift architecture ensures accurate voltage and current measurement over the vehicle's operating temperature range. The low offset voltage (5 µV) enables precise state-of-charge estimation. In a battery management system, the op amp amplifies the voltage across a shunt resistor to measure charge/discharge current. The rail-to-rail output interfaces directly with the microcontroller's ADC. The device's AEC-Q100 qualification (if available) would be beneficial, but the standard version is suitable for many automotive applications. For high-reliability designs, consider the automotive-grade variant.
おすすめ
Weigh Scale Interfaces
The ADA4522-1ARZ is ideal for weigh scale interfaces, where precision and low drift are essential. Its ultra-low offset voltage (5 µV) and drift (22 nV/°C) ensure accurate weight measurements over time and temperature. The low noise (117 nV p-p from 0.1 Hz to 10 Hz) allows detection of small weight changes. The device's ground-sensing inputs are compatible with bridge sensors. In a load cell interface, the op amp amplifies the small differential signal from the strain gauge bridge. The rail-to-rail output provides maximum dynamic range for the ADC. The zero-drift architecture eliminates offset drift that could cause weight reading errors. For best performance, use a precision excitation voltage and shield the sensor cables.
おすすめ
Thermocouple Amplification
The ADA4522-1ARZ is excellent for thermocouple amplification, providing the low offset and drift needed for accurate temperature measurement. Its 5 µV max offset and 22 nV/°C drift minimize errors in the millivolt-level thermocouple signals. The low input bias current (50 pA) reduces loading on the thermocouple. The wide supply range (up to 55V) allows operation from industrial power rails. In a thermocouple interface, the op amp amplifies the small voltage generated by the thermocouple junction. The zero-drift architecture ensures stable readings over temperature changes. The rail-to-rail output allows direct connection to an ADC. For cold-junction compensation, use a temperature sensor such as the AD7314. Proper filtering and shielding are essential to minimize noise.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADA4522-1ARZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADA4522-1ARZ-R7 | ADA4522-2ARZ | OPA2188AIDR | MCP6V11-E/SN |
|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Microchip Technology |
| Number of Channels | 1 | 1 | 2 | 2 | 1 |
| Supply Voltage Range | 4.5V to 55V | 4.5V to 55V | 4.5V to 55V | 4.5V to 36V | 2.2V to 5.5V |
| Maximum Offset Voltage | 5 µV | 5 µV | 5 µV | 25 µV | 2 µV |
| Offset Voltage Drift | 22 nV/°C | 22 nV/°C | 22 nV/°C | 0.05 µV/°C | 0.05 µV/°C |
| Voltage Noise Density | 5.8 nV/√Hz | 5.8 nV/√Hz | 5.8 nV/√Hz | 8.8 nV/√Hz | 12 nV/√Hz |
| Input Bias Current | 50 pA | 50 pA | 50 pA | 150 pA | 1 pA |
主な差別化要因
- Wide supply voltage range up to 55V （vs OPA2188AIDR)
- Ultra-low offset voltage and drift （vs OPA2188AIDR)
- Lower voltage noise density （vs MCP6V11-E/SN)
設計ノート
Decouple the power supply pins with 0.1 µF ceramic capacitors placed as close to the V+ and V- pins as possible. For high-frequency noise, add a 10 µF tantalum capacitor in parallel. The wide supply range (up to 55V) requires capacitors rated for the full supply voltage to ensure reliability.
For best performance, use a ground plane and keep the input traces short and shielded. The ADA4522-1ARZ has ground-sensing inputs, so ensure the common-mode voltage stays within the specified range. Avoid routing high-speed digital traces near the input pins to minimize noise coupling.
Avoid driving heavy capacitive loads directly, as this may cause instability. If a large load capacitor is necessary, add a series resistor (e.g., 50Ω) at the output. Also, ensure the input voltages do not exceed the supply rails, as the device is not fully protected against overvoltage.
コンプライアンス情報
RoHS compliant per Analog Devices product page. AEC-Q100 qualification not specified for this part number.
