ADA4523-1BCPZ-RL7 - 36V Zero-Drift Op Amp | Analog Devices
部品番号: ADA4523-1BCPZ-RL7 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.65 | $3.65 |
| 10 | $3.44 | $34.40 |
| 100 | $3.25 | $325.00 |
| 500 | $3.06 | $1,530.00 |
| 1,000 | $2.89 | $2,890.00 |
ADA4523-1BCPZ-RL7 概要
A zero-drift amplifier is a type of operational amplifier that uses auto-zero or chopper stabilization techniques to continuously correct offset voltage and low-frequency noise. This results in near-zero offset drift over temperature and time, which is critical for precision measurement systems. In the signal chain hierarchy, the ADA4523-1 functions as a precision amplifier, a subset of operational amplifiers, which are fundamental building blocks in analog signal processing. Its high voltage capability and low noise make it an ideal choice for applications requiring accurate amplification of small signals in the presence of large common-mode voltages.
Key features include a wide supply range of 4.5 V to 36 V, rail-to-rail input and output, low offset voltage of ±4 µV maximum, and low input bias current of 125 pA typical. The device also offers a gain bandwidth product of 5 MHz and a slew rate of 2.5 V/µs, balancing speed with precision. The LFCSP package provides excellent thermal performance and a compact footprint for space-constrained designs.
Technically, the ADA4523-1 employs a proprietary auto-zero architecture that continuously samples and corrects the input offset voltage, achieving a typical offset voltage drift of 0.01 µV/°C. The on-chip EMI filters reduce susceptibility to radio frequency interference, enhancing reliability in noisy environments. The output stage is rail-to-rail, allowing maximum dynamic range when operating from low supply voltages.
Typical applications include precision instrumentation, weigh scales, thermocouple and RTD signal conditioning, and battery-powered systems where low power consumption and high accuracy are essential. The wide supply range also supports industrial 24 V bus systems and automotive battery monitoring.
When designing with this device, ensure proper decoupling of the power supply pins with 0.1 µF ceramic capacitors placed close to the device. The input common-mode range extends to both rails, but for optimal performance, avoid operating near the rails with high source impedance.
ドロップイン代替品: ADA4523-1BCPZ-RL7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
ADA4522-1BCPZ-RL7
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ADA4523-1BCPZ-RL7 最大定格＆電気的特性
| Amplifier Type | Zero-Drift |
| Number of Channels | 1 |
| Supply Voltage Range | 4.5 V to 36 V |
| Maximum Offset Voltage | ±4 µV |
| Offset Voltage Drift | 0.01 µV/°C maximum |
| Input Noise Voltage (0.1 Hz to 10 Hz) | 88 nV p-p typical |
| Input Bias Current | 125 pA typical |
| Gain Bandwidth Product | 5 MHz |
| Slew Rate | 2.5 V/µs |
| Rail-to-Rail Input/Output | Yes |
| EMI Immunity | High (on-chip filtering) |
| 動作温度範囲 | -40°C to +125°C |
| パッケージ | 8-LFCSP (3x3 mm) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
ADA4523-1BCPZ-RL7 ピン構成
| ピン 1 | OUT — Amplifier output |
| ピン 2 | V- — Negative supply |
| ピン 3 | IN+ — Non-inverting input |
| ピン 4 | IN- — Inverting input |
| ピン 5 | V+ — Positive supply |
| ピン 6 | NC — No connect |
| ピン 7 | NC — No connect |
| ピン 8 | NC — No connect |
主な用途
ADA4523-1BCPZ-RL7 の用途: 6 件s: Precision Instrumentation, Weigh Scale Systems, Thermocouple Signal Conditioning, Battery-Powered Systems, Industrial Process Control, Medical Instrumentation.
Precision Instrumentation
The ADA4523-1BCPZ-RL7 is ideal for precision instrumentation due to its ultra-low offset voltage of ±4 µV and offset drift of 0.01 µV/°C. In a data acquisition system, it can amplify small sensor signals from thermocouples or strain gauges with minimal error. Its wide supply range of 4.5 V to 36 V allows operation from various power rails, and the rail-to-rail output maximizes ADC input range. The low 1/f noise of 88 nV p-p ensures accurate low-frequency measurements. For best performance, use precision resistors and proper guarding techniques.
おすすめ
Weigh Scale Systems
In weigh scale systems, the ADA4523-1BCPZ-RL7 amplifies the small differential output of a load cell. Its zero-drift architecture eliminates offset drift over temperature, ensuring stable readings. The low input bias current of 125 pA minimizes errors from source impedance imbalance. With a gain bandwidth of 5 MHz, it can support higher-speed measurements if needed. The wide supply range allows direct operation from 5 V to 24 V systems. For optimal noise performance, use a low-pass filter at the output and shield the input traces.
おすすめ
Thermocouple Signal Conditioning
The ADA4523-1BCPZ-RL7 is well-suited for thermocouple signal conditioning due to its low offset voltage and drift, which are critical for accurate temperature measurement. The device's 0.1 Hz to 10 Hz noise of 88 nV p-p ensures minimal noise in the low-frequency thermocouple signal. Its rail-to-rail input allows direct connection to the thermocouple without level shifting. The wide supply range supports both 5 V and 24 V systems. For cold-junction compensation, pair with a temperature sensor and a precision ADC.
おすすめ
Battery-Powered Systems
The ADA4523-1BCPZ-RL7 is suitable for battery-powered systems due to its low power consumption and wide supply range. It can operate from a single lithium-ion cell (3.7 V) down to 4.5 V, making it ideal for portable instruments. The rail-to-rail output maximizes dynamic range with low supply voltages. Its precision specifications ensure accurate measurement of battery voltage and current. For extended battery life, consider the device's quiescent current, which is not specified in the provided data but is typically low for zero-drift amplifiers.
おすすめ
Industrial Process Control
In industrial process control, the ADA4523-1BCPZ-RL7 provides accurate amplification of sensor signals in harsh environments. Its wide supply range of up to 36 V allows direct operation from 24 V industrial buses. The device's EMI immunity, thanks to on-chip filtering, ensures reliable operation in electrically noisy environments. The operating temperature range of -40°C to +125°C covers industrial requirements. For 4-20 mA loop applications, the amplifier can condition the signal before ADC conversion.
おすすめ
Medical Instrumentation
The ADA4523-1BCPZ-RL7 is suitable for medical instrumentation such as patient monitors and diagnostic equipment. Its low offset voltage and drift ensure accurate measurement of physiological signals like ECG and EEG. The low noise performance is critical for detecting small biopotential signals. The wide supply range allows operation from battery or mains-powered systems. The compact LFCSP package is ideal for portable devices. For safety, ensure proper isolation and compliance with medical standards.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADA4523-1BCPZ-RL7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADA4523-1BRZ-RL7 | ADA4522-1BCPZ-RL7 | OPA189AIDR |
|---|---|---|---|---|
| Package | 8-LFCSP (3x3) | 8-SOIC | 8-LFCSP (3x3) | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Supply Voltage Range | 4.5 V to 36 V | 4.5 V to 36 V | 4.5 V to 30 V | 4.5 V to 36 V |
| Maximum Offset Voltage | ±4 µV | ±4 µV | ±10 µV | ±3 µV |
| Offset Voltage Drift | 0.01 µV/°C | 0.01 µV/°C | 0.02 µV/°C | 0.005 µV/°C |
| Input Noise (0.1-10 Hz) | 88 nV p-p | 88 nV p-p | 100 nV p-p | 100 nV p-p |
| Gain Bandwidth Product | 5 MHz | 5 MHz | 2.7 MHz | 14 MHz |
| Input Bias Current | 125 pA | 125 pA | 150 pA | 150 pA |
主な差別化要因
- Wider supply voltage range (36 V) compared to ADA4522-1BCPZ-RL7 (30 V) （vs ADA4522-1BCPZ-RL7)
- Lower maximum offset voltage (±4 µV) vs ADA4522-1BCPZ-RL7 (±10 µV) （vs ADA4522-1BCPZ-RL7)
- Higher gain bandwidth product (5 MHz) vs ADA4522-1BCPZ-RL7 (2.7 MHz) （vs ADA4522-1BCPZ-RL7)
設計ノート
Ensure proper power supply decoupling. Place a 0.1 µF ceramic capacitor close to each supply pin (V+ and V-) and a 10 µF tantalum capacitor at the power entry point. This is critical for maintaining the low noise performance of the zero-drift amplifier.
For optimal performance, use a solid ground plane and keep input traces short and shielded. Avoid routing high-frequency digital signals near the input pins. The LFCSP package has an exposed pad that should be soldered to the ground plane for thermal and electrical performance.
Do not exceed the absolute maximum supply voltage of 36 V. Also, be aware that the input common-mode range includes the rails, but for best linearity, keep the input within 100 mV of the rails. Use precision resistors (0.1% or better) in the feedback network to maintain accuracy.
コンプライアンス情報
RoHS compliant per distributor listings. Not AEC-Q100 qualified. Lead-free per package design.
