ADAR1000 - 8-16GHz 4-Channel Beamformer | Analog Devices
部品番号: ADAR1000 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $186 | $186.00 |
| 10 | $175 | $1,750.00 |
| 100 | $160 | $16,000.00 |
| 500 | $145 | $72,500.00 |
| 1,000 | $130 | $130,000.00 |
ADAR1000 概要
A beamforming IC is a specialized RF component that controls the phase and amplitude of signals in an antenna array to steer the beam electronically without moving parts. It is a key building block in phased array systems, which are used in radar, satellite communication, and 5G networks. The ADAR1000 integrates four channels, each with phase and gain control, enabling precise beam steering in both transmit and receive paths.
Key features include 4-channel operation, half-duplex T/R switching, SPI control interface, and support for daisy-chaining multiple devices for larger arrays. The device offers high integration, reducing the component count and simplifying the design of phased array front-ends. Its wide frequency range covers both X band (8-12 GHz) and Ku band (12-16 GHz), providing flexibility for various applications.
The ADAR1000 uses a BiCMOS process that balances high-frequency performance with low power consumption. The LGA package is designed for RF performance, with careful attention to thermal and electrical characteristics. The device includes on-chip registers for configuration, which can be programmed via SPI, and supports both SPI and T/R pin control modes.
Typical applications include phased array radar, satellite communication, 5G beamforming, and electronic warfare systems. The ADAR1000 is also used in test and measurement equipment for beamforming validation. Its ability to daisy-chain up to four devices on a single evaluation board makes it scalable for larger arrays.
When designing with the ADAR1000, it is critical to follow the recommended PCB layout and thermal management guidelines, as the LGA package requires specific footprint and stackup considerations. The device's SPI interface allows for flexible control, but careful attention must be paid to register programming to ensure proper operation.
ドロップイン代替品: ADAR1000 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADAR1000 （同一形状・フットプリント） — 相違点: Frequency Range, Package.
クイック比較ツール — 並列比較する代替部品を選択:
ADAR1000BCPZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADAR1000 仕様
| Frequency Range | 8 GHz to 16 GHz |
| Number of Channels | 4 |
| Operation Mode | Half-duplex (T/R) |
| パッケージ | 88-terminal LGA, 7 mm × 7 mm |
| Process Technology | SiGe BiCMOS |
| 動作温度範囲 | -40°C to +85°C |
| Control Interface | SPI |
| RoHS ステータス | Compliant |
| 実装タイプ | Surface Mount |
ADAR1000 ピン構成
| ピン 1 | RF1 — RF input/output for channel 1 |
| ピン 2 | RF2 — RF input/output for channel 2 |
| ピン 3 | RF3 — RF input/output for channel 3 |
| ピン 4 | RF4 — RF input/output for channel 4 |
| ピン 5 | GND — Ground |
| ピン 6 | VCC — Power supply |
| ピン 7 | SPI_CLK — SPI clock |
| ピン 8 | SPI_DATA — SPI data |
| ピン 9 | SPI_CS — SPI chip select |
| ピン 10 | T/R — Transmit/receive control |
主な用途
ADAR1000 の用途: 6 件s: Phased Array Radar, Satellite Communication, 5G Beamforming, Electronic Warfare, Test and Measurement, Point-to-Point Communication.
Phased Array Radar
The ADAR1000 is ideal for phased array radar systems operating in X and Ku bands. Its 4-channel beamforming capability allows precise electronic steering of the radar beam, enhancing target detection and tracking. The half-duplex operation supports time-division duplexing, common in radar systems. With a frequency range of 8-16 GHz, it covers both X and Ku bands, making it versatile for various radar applications. The SPI interface enables easy integration with radar controllers, and the compact LGA package saves board space in dense arrays.
おすすめ
Satellite Communication
In satellite communication, the ADAR1000 provides beamforming for phased array antennas, enabling dynamic beam steering to track satellites. Its 8-16 GHz frequency range covers Ku band, commonly used for satellite downlinks. The 4-channel architecture allows for compact antenna designs with multiple beams. The half-duplex operation is suitable for TDD satellite links. The device's low power consumption and small footprint are advantageous for space-constrained satellite payloads. The SPI control interface simplifies integration with satellite communication processors.
おすすめ
5G Beamforming
The ADAR1000 supports 5G beamforming in the X and Ku bands, which are being explored for 5G-Advanced and 6G systems. Its 4-channel beamforming enables high-gain directional links, improving spectral efficiency and coverage. The half-duplex operation aligns with TDD 5G frames. The device's wide frequency range and SPI control make it suitable for adaptive beamforming algorithms. The compact LGA package allows integration into small cell and massive MIMO antennas. The ADAR1000's performance in terms of phase and gain control is critical for precise beam steering.
おすすめ
Electronic Warfare
In electronic warfare, the ADAR1000 is used in phased array systems for jamming and signal intelligence. Its 8-16 GHz frequency range covers relevant radar bands. The 4-channel beamforming allows rapid beam steering to counter threats. The half-duplex operation supports time-division multiplexing of transmit and receive functions. The device's rugged temperature range (-40°C to +85°C) ensures operation in harsh environments. The SPI interface enables fast reconfiguration for changing threats. The compact LGA package is suitable for airborne and ground-based systems.
おすすめ
Test and Measurement
The ADAR1000 is used in test and measurement equipment for characterizing phased array antennas and beamforming algorithms. Its 4-channel beamforming allows testing of multi-channel systems. The SPI interface enables automated control in test setups. The device's wide frequency range (8-16 GHz) covers X and Ku bands, making it versatile for various DUTs. The half-duplex operation allows testing of both transmit and receive paths. The compact LGA package is easy to integrate into test fixtures. The ADAR1000's performance metrics are critical for accurate measurements.
おすすめ
Point-to-Point Communication
The ADAR1000 enables beamforming in point-to-point communication links, such as microwave backhaul. Its 8-16 GHz frequency range covers common backhaul bands. The 4-channel beamforming allows for high-gain directional links, extending range and capacity. The half-duplex operation supports TDD links. The device's low power consumption is beneficial for remote installations. The SPI interface allows for adaptive beam tracking. The compact LGA package simplifies integration into outdoor units.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADAR1000 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADAR1000BCPZ | TX7516 |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Texas Instruments |
主な差別化要因
- Wide frequency range covering X and Ku bands （vs TX7516)
- Proven ecosystem with evaluation boards and reference designs （vs TX7516)
- Compact LGA package （vs TX7516)
設計ノート
The ADAR1000's LGA package requires a specific PCB footprint with controlled impedance traces for RF signals. The datasheet recommends a hybrid PCB stackup with careful attention to drill hole size, annular ring, and clearance. Use high-frequency laminates and ensure proper grounding for optimal performance.
The ADAR1000 dissipates heat during operation, especially in transmit mode. Ensure adequate thermal management by using thermal vias and a ground plane to dissipate heat. The operating temperature range is -40°C to +85°C, so verify that the junction temperature stays within limits under worst-case conditions.
When programming the ADAR1000 via SPI, ensure correct register configuration, especially Register 0x28 (LD_WRK_REGS). Incorrect programming can lead to malfunction. Also, note that the device operates in half-duplex, so avoid simultaneous transmit and receive operations.
コンプライアンス情報
RoHS compliance is indicated on the product page. Other compliance data not specified in the provided data.
