ADF4001BCPZ - 200MHz PLL Clock Generator | Analog Devices
部品番号: ADF4001BCPZ ✓ 生産中ADF4001BCPZ 概要
A PLL frequency synthesizer generates a precise output frequency by comparing an input reference with a divided feedback signal. The phase-frequency detector converts phase error into a control signal, while the charge pump and loop filter establish the tuning voltage applied to a voltage-controlled oscillator. Within the broader semiconductor hierarchy, the ADF4001 belongs to the clock and timing category, where it functions as a frequency synthesizer, clock generator, and phase-locked loop.
Key features include a 200 MHz maximum synthesis bandwidth, separate charge-pump supply that permits extended tuning voltage in 5 V systems, programmable charge-pump currents, and a three-wire serial interface. The separate VP connection allows the tuning range to be tailored to the oscillator used in the design. Analog and digital lock detection help system logic identify when the loop has acquired lock.
The architecture supports low-noise clock generation from a stable external reference. The programmable reference and feedback counters set the required multiplication and division ratios, while the charge-pump settings influence loop bandwidth, phase noise, and lock behavior. Typical operating current of 4.5 mA also makes the device suitable for power-conscious instrumentation and communication equipment.
Typical applications include clock sources for phase-locked loops, communications infrastructure, frequency synthesis for RF signal chains, precision test and measurement equipment, and low-noise local oscillators. A suitable design must provide a clean reference signal, configure the serial registers correctly, and select a loop filter and VCO suitable for the target frequency.
For PCB implementation, place the decoupling capacitors and the exposed-pad thermal connection close to the device, keep the reference and RF input routing compact, and avoid routing high-speed or high-current switching signals beneath the package. Check the voltage at the charge-pump supply because the separate VP pin is central to extending tuning-voltage headroom.
This page combines the manufacturer specifications, package details, interface characteristics, and practical PLL design considerations to help engineers evaluate the ADF4001BCPZ for clock-generation and frequency-synthesis designs.
ドロップイン代替品: ADF4001BCPZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADF4001BCPZ （同一形状・フットプリント） — 相違点: Lock Detection, Package, Product Type, Serial Interface.
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストADF4001BCPZ 仕様
| Product Type | Clock generator and PLL frequency synthesizer |
| Maximum Frequency | 200 MHz |
| Input Frequency Range | 5 MHz to 200 MHz |
| Power Supply Range | 2.7 V to 5.5 V |
| Separate Charge Pump Supply | VP, extended tuning-voltage support |
| Typical Operating Current | 4.5 mA |
| N Counter | Programmable 13-bit |
| Reference Counter | Programmable 14-bit |
| Serial Interface | 3-wire |
| Lock Detection | Analog and digital |
| Power-Down Mode | Hardware and software |
| Charge Pump Current | Programmable |
| パッケージ | 20-pin WFQFN/LFCSP with exposed pad |
| 実装タイプ | Surface mount |
| Number of Circuits | 1 |
| Input Clock Type | Clock |
| Output Clock Type | Clock |
| Differential Input | Yes |
| Differential Output | No |
ADF4001BCPZ ピン構成
| ピン 1 | AVDD — Analog supply voltage |
| ピン 2 | VDD — Digital supply voltage |
| ピン 3 | NC — Not connected |
| ピン 4 | DGND — Digital ground |
| ピン 5 | AGND — Analog ground |
| ピン 6 | RIN+ — Differential reference input, non-inverting terminal |
| ピン 7 | RIN- — Differential reference input, inverting terminal |
| ピン 8 | REFIN — Reference input |
| ピン 9 | RFIN — RF feedback input |
| ピン 10 | VCO — Voltage-controlled oscillator tuning input |
| ピン 11 | OUT — Clock output |
| ピン 12 | NC — Not connected |
| ピン 13 | NC — Not connected |
| ピン 14 | VP — Charge-pump supply |
| ピン 15 | NC — Not connected |
| ピン 16 | NC — Not connected |
| ピン 17 | PFD — Phase-frequency detector output |
| ピン 18 | CLK — Serial-interface clock |
| ピン 19 | DATA — Serial-interface data input |
| ピン 20 | LE — Serial-interface latch enable |
主な用途
ADF4001BCPZ の用途: 6 件s: Communications Clock Synthesis, RF Signal-Chain Clocking, Precision Test and Measurement, Audio and Measurement Data Acquisition, Industrial Frequency Reference, Low-Noise Local Oscillator Support.
Communications Clock Synthesis
The ADF4001BCPZ is suitable for producing stable, programmable communication clocks from a clean reference signal. Its 200 MHz bandwidth, programmable 13-bit N counter, 14-bit reference counter, and typical 4.5 mA operating current support compact RF and digital communication subsystems. The separate VP charge-pump supply can extend tuning-voltage headroom in 5 V systems, while analog and digital lock detection provide useful acquisition status. System timing still depends on the reference quality, VCO tuning range, loop filter, and register-defined division ratios.
おすすめ
RF Signal-Chain Clocking
The ADF4001BCPZ can establish the reference-derived clock used by RF signal-chain modules that require programmable phase relationships or stable local-oscillator support. Its low-noise phase-frequency detector and precision charge pump operate with an external VCO and loop filter, providing control over division ratio and acquisition behavior. The 200 MHz maximum bandwidth accommodates demanding intermediate-frequency plans, while the 4.5 mA typical operating current helps control system loading. RF layout must keep feedback and reference routing short and controlled.
おすすめ
Precision Test and Measurement
The ADF4001BCPZ is appropriate for laboratory and industrial instrumentation that requires a programmable clock derived from a stable reference. The programmable counters support rational frequency ratios, while lock detection allows the instrument controller to verify acquisition before measurements begin. A 200 MHz synthesis bandwidth and 4.5 mA typical operating current provide a useful balance between capability and power use. For accurate results, the reference oscillator and loop components should have low phase noise, and the reference and feedback paths should remain isolated from digital switching noise.
おすすめ
Audio and Measurement Data Acquisition
The ADF4001BCPZ can supply a controlled sampling or master clock to precision data-acquisition systems. Its programmable reference and feedback ratios allow multiple instrument functions to share a common frequency relationship, and lock detection supports deterministic system initialization. With 200 MHz bandwidth and 4.5 mA typical operating current, the device can serve compact instrumentation without introducing a high-power synthesizer architecture. The clock signal and analog measurement paths should be routed separately to avoid coupling reference or VCO noise into the sampled data.
おすすめ
Industrial Frequency Reference
The ADF4001BCPZ fits industrial systems that must derive a known frequency from an external reference while controlling loop acquisition and power consumption. Its hardware and software power-down functions permit the synthesis section to be disabled when it is not needed, and the typical 4.5 mA operating current supports low-power designs. The separate VP connection broadens the available tuning-voltage range for suitable VCOs. Industrial implementations should account for temperature drift, reference quality, grounding, and stable power supplies when defining lock and calibration behavior.
おすすめ
Low-Noise Local Oscillator Support
The ADF4001BCPZ can serve as the PLL controller for a voltage-controlled local oscillator in systems requiring a stable, programmable output. The architecture includes a low-noise digital phase-frequency detector, precision charge pump, and configurable reference and N counters. Using the separate VP supply allows a higher tuning-voltage range than the main supply alone may provide. Final phase noise and spur performance depend on the VCO, loop bandwidth, reference quality, component selection, and layout, so the complete signal chain should be evaluated rather than judging only the controller specifications.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADF4001BCPZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Analog Devices |
| Package | 20-pin WFQFN/LFCSP with exposed pad |
| Product Type | Clock generator and PLL frequency synthesizer |
| Maximum Frequency | 200 MHz |
| Input Frequency Range | 5 MHz to 200 MHz |
| Supply Voltage | 2.7 V to 5.5 V |
| Typical Operating Current | 4.5 mA |
| Serial Interface | 3-wire |
| N Counter | Programmable 13-bit |
| Reference Counter | Programmable 14-bit |
| Lock Detection | Analog and digital |
| Charge Pump Supply | Separate VP supply |
主な差別化要因
- Provides a separate charge-pump supply （vs ADF4002BCPZ)
- Matches the 200 MHz bandwidth of the ADF4001 family （vs ADF4002BCPZ)
- Programmable counters support flexible rational synthesis ratios （vs ADF4001BCP)
設計ノート
Route REFIN, RFIN, VCO, and OUT as short, controlled-impedance paths, and place the loop-filter components near the relevant device pins. Keep the digital serial-interface traces away from the reference and feedback nodes to reduce coupling into the phase-frequency detector. Use a continuous ground reference beneath the exposed pad and connect it according to the manufacturer package drawing.
Decouple the main supply and VP charge-pump supply separately, following the recommended capacitor values and placement in the Analog Devices ADF4001 Data Sheet Rev. B. Check that VP cannot exceed the selected VCO tuning range even when the main supply is 5.5 V. The separate VP function is useful for extended tuning headroom, but an excessive charge-pump voltage can damage the oscillator or connected loop components.
Do not select the loop filter only from the desired division ratio; its bandwidth also determines phase noise, reference-spur suppression, acquisition time, and VCO tuning-range coverage. Validate lock over temperature and supply tolerance, and do not assume that the similar package used by related ADF4000-family products guarantees compatible pin functions or register behavior. Review the manufacturer data sheet for the exact order code.
コンプライアンス情報
The manufacturer product page lists the ADF4001 in production, but no explicit compliance declaration was confirmed for the ADF4001BCPZ order code. The exposed-pad package requires assembly and solder-flux practices appropriate to its package documentation and the finished-product RoHS obligations.
