ADF4153BCP - 4 GHz Fractional-N Synthesizer | Analog Devices
部品番号: ADF4153BCP ✓ 生産中ADF4153BCP 概要
A fractional-N frequency synthesizer is a clock-generation IC that synthesizes an output frequency locked to an external reference while allowing non-integer division ratios. Within the broader semiconductor hierarchy, it is a PLL-based frequency synthesizer, a clock-and-timing IC, and a power-management-adjacent RF timing component used to generate stable local-oscillator signals in receiver and transmitter chains.
The ADF4153 supports RF bandwidths from 500 MHz to 4 GHz and includes selectable 4/5 and 8/9 dual-modulus prescalers. Programmable charge-pump currents support loop-filter optimization, while the 3-wire serial interface provides register-based control of synthesis functions. The separate VP connection allows the tuning-voltage supply to be extended, making the device suitable for RF systems requiring elevated VCO tuning voltages.
Its architecture uses a low-noise digital phase-frequency detector to compare the divided feedback signal with the divided reference. A precision charge pump drives the loop-filter voltage, while the Sigma-Delta fractional interpolator enables fractional division without changing the external reference frequency. The result is flexible frequency planning for RF transmitters, receivers, instrumentation, and communication equipment.
Typical uses include wireless receiver and transmitter local oscillators, upconversion and downconversion chains, RF test equipment, and frequency-generation modules. The fractional-N architecture is particularly useful when the desired channel spacing cannot be obtained conveniently through integer-N division. The 4 GHz upper operating limit supports high-band RF designs, while the 500 MHz lower limit covers cellular, microwave, and test-signal applications.
PCB layout is critical because the ADF4153's phase-noise and spur performance depends on isolation between the RF input, VCO, reference, charge-pump output, and sensitive analog supply pins. Keep the VCO away from the reference input to avoid board-level reference-noise feedthrough, and place decoupling and loop-filter components close to their associated pins.
This page combines verified Analog Devices product information, distributor pricing, package details, candidate drop-in alternatives, and practical design guidance to support faster component selection, PCB compatibility review, and RF design planning.
ドロップイン代替品: ADF4153BCP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADF4153BCP （同一形状・フットプリント） — 相違点: Device Type, Package, Serial Interface.
ADF4113BCPZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADF4113HVBCPZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADF4106BCPZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADF4002BCPZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADF4157BCPZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADF4153BCP 仕様
| Device Type | Fractional-N frequency synthesizer |
| Minimum RF Input Frequency | 500 MHz |
| Maximum RF Input Frequency | 4 GHz |
| 電源電圧 | 3.3 V |
| Prescaler | 4/5 or 8/9 dual modulus |
| Charge Pump Current | Programmable |
| Serial Interface | 3-wire |
| Phase Detector Type | Low-noise digital phase-frequency detector |
| Fractional Divider | Sigma-Delta fractional interpolator |
| Reference Divider | Programmable |
| Tuning Supply | Separate VP connection for extended tuning voltage |
| パッケージ | 20-lead LFCSP, 4 mm x 4 mm |
| Package Code | QCC20 (MO-220VGGD-1) |
| 実装タイプ | Surface mount |
ADF4153BCP qcc20 (mo-220vggd-1) ピン配置ガイド
ADF4153BCP (qcc20 (mo-220vggd-1) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADF4153BCP.
詳細は データシート をご参照ください。
主な用途
ADF4153BCP の用途: 6 件s: Wireless Receiver Local Oscillator, Wireless Transmitter Frequency Generation, RF Upconversion and Downconversion, RF Test and Measurement Equipment, Microwave Communication Modules, Industrial RF Signal-Control Systems.
Wireless Receiver Local Oscillator
The ADF4153BCP fits wireless receiver local-oscillator generation because it combines a confirmed 500 MHz to 4 GHz RF range with fractional-N division and selectable 4/5 or 8/9 prescalers. Placing it in the receiver's upconversion or downconversion path permits channel spacing to be established without requiring every frequency ratio to be integer-N. The programmable charge-pump current supports adaptation of loop dynamics to the selected prescaler, reference, and phase-noise requirements. Designers should still calculate phase margin and spurious performance with the final loop-filter values, since the same broad RF capability does not guarantee identical spur behavior in every channel plan.
おすすめ
Wireless Transmitter Frequency Generation
The ADF4153BCP supports wireless transmitter frequency generation where a stable, programmable RF drive is required from 500 MHz to 4 GHz. Fractional-N operation provides useful channel flexibility, while the separate VP connection allows the synthesizer to accommodate an extended VCO tuning-voltage range. The 3-wire interface simplifies digital control of divider, prescaler, and charge-pump settings. In a transmitter, the practical benefit depends on loop-filter design: phase noise affects the carrier spectrum, while reference and integer-divider spurs can create unwanted emissions adjacent to the intended channel.
おすすめ
RF Upconversion and Downconversion
The ADF4153BCP is suitable for RF upconversion and downconversion blocks because it can generate local-oscillator frequencies across 500 MHz to 4 GHz. A programmable fractional-N feedback divider allows multiple channel-related ratios to be derived from one stable reference, while the dual-modulus prescaler choices support different feedback-divider arrangements. The resulting local oscillator can drive a mixer in a receiver or transmitter. Performance evaluation should include VCO isolation, reference feedthrough, loop bandwidth, and unwanted-sideband suppression rather than relying on the synthesizer's frequency range alone.
おすすめ
RF Test and Measurement Equipment
The ADF4153BCP can serve as the programmable frequency-generation element in RF test equipment requiring an output between 500 MHz and 4 GHz. Its fractional-N architecture permits convenient selection of frequencies that are not integer multiples of the reference, and its 3-wire interface allows instrument control logic to configure the synthesizer. The 20-lead LFCSP package supports compact instrument-board layouts. For measurement accuracy, the reference oscillator's phase noise and frequency stability become part of the complete signal chain, so the synthesizer should be evaluated together with its reference source, loop filter, output matching network, and calibration routine.
おすすめ
Microwave Communication Modules
The ADF4153BCP is applicable to microwave communication modules whose local oscillator must operate from 500 MHz to 4 GHz. Programmable fractional division is useful for compact transceivers that need multiple channel plans without changing the reference source, while the selectable prescalers provide implementation flexibility. The separate VP pin is particularly relevant when the connected VCO requires a tuning range beyond the synthesizer's basic supply level. Board-level performance depends on keeping the VCO away from RFIN and the reference network, since coupling between these paths can degrade phase noise and increase spurs.
おすすめ
Industrial RF Signal-Control Systems
The ADF4153BCP can provide a programmable RF source for industrial signal-control, monitoring, and communication equipment operating within the 500 MHz to 4 GHz band. Fractional-N operation simplifies frequency planning when equipment must select channels that do not align cleanly with integer division ratios. The device's programmable charge-pump current and prescaler options permit loop tuning, while power-down and digital lock-detect functions can assist system control when confirmed in the final register configuration. Industrial designs should account for reference quality, temperature drift, startup behavior, and deterministic timing between synthesizer lock and downstream RF enable.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADF4153BCP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADF4113BCPZ | ADF4113HVBCPZ | ADF4106BCPZ | ADF4002BCPZ | ADF4157BCPZ |
|---|---|---|---|---|---|---|
| Package | 20-lead LFCSP, 4 mm x 4 mm | 20-lead LFCSP | 20-lead LFCSP | 20-lead LFCSP | 20-lead LFCSP | 20-lead LFCSP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
主な差別化要因
- Confirmed 4 GHz upper RF operating limit （vs ADF4113BCPZ)
- Programmable fractional-N architecture （vs ADF4106BCPZ)
- Selectable dual-modulus prescalers and charge-pump control （vs ADF4002BCPZ)
設計ノート
Keep the VCO physically separated from the RF input and reference network. The Analog Devices datasheet warns that low-level on-chip reference-switching noise can feed through the RFIN pin back into the VCO, producing reference spurs as high as -90 dBc. Route the reference path away from the VCO and sensitive RF circuitry, and maintain a continuous ground reference to reduce coupling.
Place loop-filter components close to the charge-pump output and synthesizer pins, and place decoupling capacitors adjacent to the corresponding supply pins. Keep the charge-pump and filter return current in a compact path rather than routing it through noisy system ground. This minimizes parasitic inductance and helps preserve the intended phase margin, reference rejection, and spur performance.
Do not treat a matching 20-lead LFCSP footprint as proof of functional drop-in compatibility. Before replacing the ADF4153BCP, compare RF frequency limits, prescaler ratios, charge-pump settings, reference-divider range, tuning-voltage requirements, register addresses, power-down behavior, and digital lock-detect polarity. Existing firmware may also require modification if the alternative uses a different register map.
The separate VP connection supports an extended VCO tuning-voltage range, but the external VCO and charge-pump loop form a sensitive high-gain RF system. Use a short charge-pump trace, carefully selected loop-filter components, and controlled reference routing. Evaluate phase margin, reference spurs, and VCO pulling with the final PCB rather than relying only on simulation values.
コンプライアンス情報
The supplied verified excerpts do not provide explicit compliance declarations for the ADF4153BCP ordering code. Compliance and automotive qualification must be confirmed from the current Analog Devices product documentation before use in regulated or vehicle applications.
