ADF4153BRUZ-RL7 - 4GHz Fractional-N Synthesizer | Analog Devices
部品番号: ADF4153BRUZ-RL7 ✓ 生産中ADF4153BRUZ-RL7 概要
A fractional-N frequency synthesizer is a phase-locked-loop device that generates a stable, programmable output frequency from a reference clock. Within the broader hierarchy, it belongs to clock and timing ICs, frequency synthesizers, phase-locked loops, and power-management-independent RF signal-chain devices. The ADF4153 family is used where an RF system requires local-oscillator generation for upconversion, downconversion, modulation, demodulation, or other frequency-conversion functions.
The ADF4153 integrates a low-noise digital phase-frequency detector, a precision charge pump, and a programmable reference divider. Its fractional-N feedback uses a sigma-delta digital-to-analog converter to modulate the feedback divider and generate fractional frequency steps. This architecture helps improve phase-noise and spur performance compared with conventional integer-N synthesis while retaining programmable output-frequency control through a serial interface.
The 4 GHz operating capability makes the ADF4153 suitable for RF sections operating below that ceiling. Exact phase-noise, reference-input, output-drive, lock-time, channel-spacing, and current-consumption limits should be taken from the manufacturer datasheet for the selected temperature and production variant. Because these limits depend on divider settings, reference frequency, PFD frequency, and loop-filter values, system-level calculations require the complete operating configuration rather than the maximum synthesizer frequency alone.
Typical uses include wireless receiver local oscillators, wireless transmitter upconverters, instrumentation and test equipment, and frequency-generation modules. In each application, the device establishes the tunable reference used by a mixer or downstream RF stage. Selection should account for required output frequency, channel spacing, reference frequency, permitted spur and phase-noise levels, loop bandwidth, and the register-control interface implemented by the host processor or FPGA.
PCB implementation requires careful treatment of the power, ground, reference, and RF connections. Keep the power-supply and ground paths short, place decoupling components close to their associated pins, and follow the package-specific land pattern in the manufacturer datasheet. The reference and feedback paths should be routed away from high-energy RF and switching nodes to reduce unwanted coupling.
This page combines the manufacturer device description, exact 4 GHz and 16-TSSOP identifiers, sourcing records, package guidance, and a restricted drop-in comparison that focuses on genuine pin-compatible ADF4153-family choices rather than merely similar synthesizer functions.
ドロップイン代替品: ADF4153BRUZ-RL7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADF4153BRUZ-RL7 (同一形状・フットプリント) — 相違点: Architecture, Operating Temperature Range, Package, Product Type.
ADF4153BRUZ-RL
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADF4153BRUZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADF4153YRUZ-RL7
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADF4153BRUZ-RL7 仕様
| Device Type | Fractional-N frequency synthesizer |
| Maximum Synthesis Frequency | 4 GHz |
| Phase-Locked-Loop Architecture | Fractional-N |
| パッケージ | 16-TSSOP |
| Package Body Width | 4.40 mm |
| Number of Leads | 16 |
| Phase-Frequency Detector | Low-noise digital PFD |
| Charge Pump | Precision charge pump |
| Reference Divider | Programmable |
| Feedback Technique | Sigma-delta fractional-N feedback |
| 動作温度範囲 | -40 C to +85 C |
ADF4153BRUZ-RL7 4.40 mm ピン配置ガイド
ADF4153BRUZ-RL7 (4.40 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADF4153BRUZ-RL7.
詳細は データシート をご参照ください。
主な用途
ADF4153BRUZ-RL7 の用途: 6 件s: Wireless Receiver Local Oscillator, Wireless Transmitter Upconverter, RF Test and Measurement Instrument, Frequency Conversion Module, Industrial RF Control System, Automotive RF Communication Platform.
Wireless Receiver Local Oscillator
The ADF4153BRUZ-RL7 is suited to a receiver local oscillator because its fractional-N architecture generates a programmable RF output from a stable reference clock. The 4 GHz maximum synthesis frequency covers receiver channels below that limit while fractional feedback permits fine channel spacing. In the signal path, the synthesizer feeds a mixer used for downconversion. Designers should select the PFD frequency, loop bandwidth, integer divider, and fractional value together because phase noise, reference spur, lock time, and output spur performance depend on that complete configuration.
おすすめ
Wireless Transmitter Upconverter
The ADF4153BRUZ-RL7 can generate the tunable local-oscillator signal used by an RF upconversion stage in a wireless transmitter. Its fractional-N feedback enables programmable frequency offsets without relying solely on a coarse integer divider. When placing it in the transmitter chain, verify the required output frequency below 4 GHz, output-drive capability, reference purity, and isolation from the high-power RF path. Keep the synthesizer output return path separated from the PA supply and antenna routing to reduce modulation of the local oscillator.
おすすめ
RF Test and Measurement Instrument
The ADF4153BRUZ-RL7 is applicable to RF test equipment that requires a programmable source for excitation, calibration, or mixer drive. Its 4 GHz ceiling and fractional-N architecture allow the instrument to select frequencies across a wide tuning range with improved resolution compared with an integer-N-only design. A practical implementation uses a low-noise reference oscillator and carefully designed loop filter. Confirm the required output level, settling time, phase-noise floor, and spur limits for each measurement before configuring the synthesizer registers.
おすすめ
Frequency Conversion Module
The ADF4153BRUZ-RL7 can serve as the programmable oscillator in a compact frequency-conversion module. The fractional-N architecture supports adjustable output across RF bands below 4 GHz, while the 16-TSSOP package supports space-constrained module construction. The module designer must route the reference, charge-pump loop filter, digital control interface, and RF output with controlled impedance. Because synthesizer phase noise and reference spur can appear at the converted output, separate the sensitive reference and feedback paths from the RF output and switching circuitry.
おすすめ
Industrial RF Control System
The ADF4153BRUZ-RL7 can provide a stable adjustable RF source for industrial RF sensing, control, or communications equipment operating below 4 GHz. Fractional-N synthesis supports fine frequency placement from a common reference, which is useful when multiple RF functions must remain coherent. The system designer should evaluate the commercial operating range of -40 C to +85 C for the selected order code and define startup, lock, and fault behavior. Robust implementation also requires separating the sensitive loop-filter node from motor-control and switching-power-supply traces.
おすすめ
Automotive RF Communication Platform
ADF4153YRUZ-RL7 is the automotive-grade family option relevant to an automotive RF platform, while ADF4153BRUZ-RL7 serves commercial and industrial implementations. According to the Analog Devices datasheet, automotive-model specifications may differ from commercial-model specifications, so the exact ordering code must be checked against qualification and electrical requirements. RF communication modules still require controlled reference routing, careful ground-plane continuity, and verification of transient, temperature, and EMC requirements for the complete vehicle platform.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADF4153BRUZ-RL7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADF4153BRUZ-RL | ADF4153BRUZ | ADF4153YRUZ-RL7 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Device Architecture | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer |
| Maximum Synthesis Frequency | 4 GHz | 4 GHz | 4 GHz | 4 GHz |
| Production Grade | Commercial | Commercial | Commercial | Automotive |
| Phase-Frequency Detector | Low-noise digital PFD | Low-noise digital PFD | Low-noise digital PFD | Low-noise digital PFD |
| Charge Pump | Precision charge pump | Precision charge pump | Precision charge pump | Precision charge pump |
| Reference Divider | Programmable | Programmable | Programmable | Programmable |
| Fractional Feedback Technique | Sigma-delta fractional-N feedback | Sigma-delta fractional-N feedback | Sigma-delta fractional-N feedback | Sigma-delta fractional-N feedback |
主な差別化要因
- Target RL7 ordering configuration (vs ADF4153BRUZ-RL)
- Commercial-grade family alignment (vs ADF4153YRUZ-RL7)
- Exact family and architecture continuity (vs ADF4154BRUZ-RL7)
設計ノート
Implement the 16-TSSOP land pattern exactly as shown in the Analog Devices package drawing, including pin-1 orientation and exposed-pad requirements where applicable. Place local power decoupling at the regulator pins and provide a continuous return path beneath the device. Keep the reference input, feedback divider, and charge-pump loop-filter components away from the RF output and digital clock lines so switching activity and RF energy do not add phase noise or reference spur to the synthesized output.
Route the reference clock as a controlled-impedance or tightly referenced network over a continuous ground plane, and keep its return current close to the trace. If the reference source is jittery or spectrally impure, the synthesizer will reproduce those defects at the output. Validate reference amplitude, slew rate, allowable frequency, and coupling margin against the manufacturer specifications, then measure output phase noise and spurs with the final loop-filter values rather than relying only on nominal register settings.
Do not select a synthesizer solely because it is fractional-N and uses a 16-TSSOP package. Confirm that an alternative preserves the target's pin functions, control interface, reference requirements, output drive, and operating limits. For ADF4153 family variants, distinguish commercial from automotive ordering codes because the manufacturer notes that automotive-model specifications may differ. After any substitution, reload the intended register sequence, confirm PLL lock, and verify output frequency, phase noise, spurs, and supply current on the assembled board.
コンプライアンス情報
The commercial ADF4153BRUZ-RL7 is not identified as an automotive-qualified variant; use the automotive-ordering family only when the manufacturer qualification and application requirements are confirmed. Explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not present in the manufacturer excerpts.