ADF4211BCP - Dual RF/IF Integer-N PLL | Analog Devices
部品番号: ADF4211BCP ✓ 生産中ADF4211BCP 概要
A PLL frequency synthesizer is a timing and frequency-control IC that locks a voltage-controlled oscillator to a stable reference frequency. Within the broader hierarchy, a PLL belongs to the clock and timing IC family, which supports frequency generation, phase management, distribution, and modulation. The ADF4211BCP combines a programmable integer-N divider, frequency comparison, charge-pump output, reference-frequency division, and RF/IF prescaling in one integrated circuit.
Verified device features include RF and IF prescaler paths, programmable dual-modulus operation, programmable charge-pump currents, a 5.5 V power supply, and a separate VP charge-pump supply. The separate VP rail allows the tuning voltage to extend beyond the nominal operating range when higher-range VCO tuning is required. Programmable prescaler and charge-pump settings give the system designer control over divider ratios, phase-detector behavior, and loop-current selection.
The ADF4211BCP belongs to the ADF4211 dual PLL family and is identified in available listings as a clock generator, PLL, or frequency synthesizer. The provided manufacturer-related search data confirms an input range from 0 MHz to 2 GHz and describes the device as a dual RF/IF PLL. Family documentation also identifies 0.5 GHz, 1.2 GHz, 2.0 GHz, 2.7 GHz, and 3.0 GHz operating-band combinations associated with the product family, although the exact enabled path and divider configuration must be confirmed in the manufacturer datasheet.
Typical uses include RF transceiver local oscillators, IF signal generation, communication receivers and transmitters, test equipment, and dual-channel clock synthesis. The dual architecture allows two related synthesis paths to share a reference while supporting different output frequencies. Designers should select the appropriate prescaler, divider, charge-pump current, loop filter, reference divider, and VCO tuning range for the target output plan.
The principal design consideration is loop stability. Component values must be derived from the selected prescaler, PFD frequency, charge-pump current, VCO gain, and required phase-noise performance. PCB return paths, ground-plane continuity, supply bypassing, and isolation between noisy digital control lines and sensitive RF outputs are also critical in high-frequency implementations.
This product record combines the verified ADF4211BCP specifications, package information, sourcing links, candidate family comparisons, and practical PLL design guidance. It is intended to help engineers evaluate clock-generation and RF/IF synthesis requirements before completing reference-design and loop-filter validation.
ドロップイン代替品: ADF4211BCP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADF4211BCP （同一形状・フットプリント） — 相違点: Package, Charge Pump Supply, Architecture, Charge Pump Current, Prescaler.
ADF4210BCP
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ADF4212BCP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ADF4213BCP
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ADF4211BCP 仕様
| Product Type | Dual RF/IF PLL frequency synthesizer |
| Input Frequency Range | 0 MHz to 2 GHz |
| Architecture | Dual RF/IF integer-N PLL |
| Power Supply | 5.5 V |
| Charge Pump Supply | Separate VP supply |
| Extended Tuning Voltage | Supported by separate VP charge-pump supply |
| Prescaler | Programmable dual-modulus RF and IF prescaler |
| Charge Pump Current | Programmable |
| Number of PLL Channels | 2 |
| パッケージ | 20-pin LFCSP |
| Package Pin Count | 20 pins |
| 実装タイプ | Surface Mount |
ADF4211BCP 20 pins ピン配置ガイド
ADF4211BCP (20 pins パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADF4211BCP.
詳細は データシート をご参照ください。
主な用途
ADF4211BCP の用途: 6 件s: RF Transceiver Local Oscillator, Dual-Band IF Signal Generation, Communication Receiver and Transmitter, Instrumentation and Test Signal Source, Clock and Reference Multiplier, RF and IF Test Equipment.
RF Transceiver Local Oscillator
The ADF4211BCP fits RF transceiver local-oscillator generation because it combines dual RF/IF integer-N PLL paths with a 0 MHz to 2 GHz input range. According to the Analog Devices datasheet, programmable dual-modulus prescalers and programmable charge-pump currents support flexible frequency planning and loop-current selection. One synthesis path can establish the transmitter or receiver RF reference while the other supports an IF-related frequency. The principal design trade-off is that the external VCO, loop filter, reference divider, and feed-forward or prescaler configuration must produce acceptable phase noise, reference spurs, and lock time without exceeding the tuner’s range.
おすすめ
Dual-Band IF Signal Generation
The ADF4211BCP is appropriate for systems requiring coordinated RF and IF frequencies because its dual RF/IF architecture provides separate synthesis paths within one 20-pin LFCSP device. According to the Analog Devices datasheet, each path supports programmable prescaling and the device offers programmable charge-pump currents. This permits each channel to be assigned a different divider and loop configuration while sharing a stable reference. Designers should compare channel phase noise and reference spur behavior because the dual capability does not automatically guarantee identical performance in every frequency plan. Layout should isolate the two loops where required to prevent coupling through supply, ground, and reference paths.
おすすめ
Communication Receiver and Transmitter
The ADF4211BCP supports communication receiver and transmitter designs requiring stable, programmable frequency references derived from a common source. Its verified 0 MHz to 2 GHz input range, dual RF/IF structure, programmable charge-pump currents, and 5.5 V supply align with multi-conversion architectures that require local oscillators at RF and IF frequencies. According to the Analog Devices datasheet, programmable dual-modulus prescalers provide the divider flexibility required by integer-N synthesis. The component should be selected only after confirming channel-band limits, reference-input frequency, tuning range, and register compatibility. Practical implementation also requires careful VCO isolation and controlled reference routing.
おすすめ
Instrumentation and Test Signal Source
The ADF4211BCP can support instrumentation and test-signal-generation systems that need two related, programmable frequencies from one reference source. According to the Analog Devices datasheet, the device provides programmable RF and IF prescalers plus programmable charge-pump currents, allowing loop behavior to be adapted to different synthesis plans. The dual architecture may reduce the number of separate synthesizer packages in multi-channel test equipment, although each channel still needs its own VCO and feedback path. Because test instruments often impose strict phase-noise and spur limits, engineers should evaluate measured reference spur levels and loop stability rather than relying on nominal frequency capability alone. Supply and reference layout remain central to repeatable results.
おすすめ
Clock and Reference Multiplier
The ADF4211BCP can multiply a stable reference into programmable RF or IF-related frequencies, making it relevant to clock generation and reference-multiplication systems. Its verified input range extends from 0 MHz to 2 GHz, while programmable prescaling and charge-pump currents allow the feedback ratio and loop dynamics to be tailored. According to the Analog Devices datasheet, the device supports a separate VP charge-pump supply for an extended tuning-voltage range, which can help when driving a wide-range VCO. The trade-off is that a PLL loop trades low phase noise against lock time and reference spurs, so output jitter requirements must be converted into a phase-noise and loop-bandwidth specification before component values are selected.
おすすめ
RF and IF Test Equipment
The ADF4211BCP is well suited to RF and IF test equipment requiring accurate, programmable local-oscillator or stimulus frequencies. According to the Analog Devices datasheet, its dual RF/IF integer-N architecture supports two coordinated synthesis channels, while programmable prescalers and charge-pump currents provide design flexibility. The 20-pin LFCSP package supports compact instrument electronics, but thermal and decoupling layout should follow manufacturer recommendations. For automated measurement systems, lock time must be included in the instrument’s settling budget and reference spur levels must be checked against the narrowest measurement bandwidth. Separate VCOs may improve channel isolation, while a shared reference can reduce frequency drift between channels.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADF4211BCP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADF4210BCP | ADF4212BCP | ADF4213BCP |
|---|---|---|---|---|
| Package | 20-pin LFCSP | 20-pin LFCSP | 20-pin LFCSP | 20-pin LFCSP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Dual RF/IF integer-N PLL frequency synthesizer | Dual RF/IF PLL family device | Dual RF/IF PLL family device | Dual RF/IF PLL family device |
| Prescaler | Programmable dual-modulus RF and IF | Programmable RF and IF family architecture | Programmable RF and IF family architecture | Programmable RF and IF family architecture |
| Charge Pump Current | Programmable | Programmable in the related family architecture | Programmable in the related family architecture | Programmable in the related family architecture |
主な差別化要因
- Dual RF and IF synthesis in one device （vs ADF4210BCP)
- Programmable loop-current control （vs ADF4212BCP)
- Separate VP rail for extended tuning voltage （vs ADF4213BCP)
設計ノート
Do not treat a shared package and similar PLL architecture as proof of drop-in compatibility. Before replacing ADF4211BCP with ADF4210BCP, ADF4212BCP, or ADF4213BCP, compare RF and IF channel-frequency limits, prescaler values, reference-divider range, charge-pump settings, register addresses, and power-down behavior. According to the Analog Devices family documentation, programmable prescalers and charge-pump currents are central functions, so an incorrect substitution can alter both divider ratios and loop stability.
Keep the 5.5 V supply and separate VP charge-pump rail clean because reference phase noise and tuning stability depend on low-noise supply delivery. Place the closest decoupling capacitor directly beside the relevant supply terminals, connect its ground return to the uninterrupted ground plane, and avoid routing sensitive feedback traces beneath digital control paths. The separate VP capability supports extended tuning voltage, but its operating limits and sequencing requirements must be confirmed in the manufacturer datasheet.
Route the reference, prescaler, charge-pump, and feedback paths with controlled impedance and short connections. The 20-pin LFCSP layout requires careful escape routing, and exposed-pad thermal treatment must follow the Analog Devices land pattern. Keep the VCO control line away from clocks, serial-programming signals, and switching supplies because charge-pump current pulses can couple into the tuning node and create reference spurs or phase-noise degradation.
コンプライアンス情報
The supplied search results do not contain explicit environmental or automotive compliance statements. Compliance must be confirmed against the current Analog Devices product page or manufacturer declaration.
