ADG1213YRUZ - Quad SPST iCMOS Switch, 120Ω, ±15V | Analog Devices
部品番号: ADG1213YRUZ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.18 | $7.18 |
| 10 | $6.46 | $64.60 |
| 100 | $5.74 | $574.00 |
| 500 | $5.1 | $2,550.00 |
| 1,000 | $2.97 | $2,970.00 |
ADG1213YRUZ 概要
An iCMOS switch is a monolithic CMOS device that combines high-voltage CMOS and bipolar process steps, enabling analog switches that tolerate ±15 V supplies while still allowing 3 V logic-compatible control inputs without requiring a separate V_L rail. The ADG1211/ADG1212/ADG1213 family sits in the broader hierarchy of analog switches → multiplexers → signal-chain interface ICs → mixed-signal semiconductors, and serves as a precision, low-charge-injection building block between sensitive analog front ends and higher-voltage analog signal paths.
Key differentiating features include four independently selectable normally-open SPST channels (the ADG1211 is normally-open, ADG1212 normally-closed, ADG1213 contains two of each - check device grade), sub-1 pC charge injection that minimizes transient switching disturbance on sample-and-hold capacitors, and typical power consumption below 0.03 µW, making it well suited for power-sensitive multi-channel instrumentation. The 120 Ω on resistance is fully specified at ±15 V and +12 V with a flat, low-distortion characteristic across the audio band.
Architecturally, the ADG1213 leverages the iCMOS process to integrate high-voltage DMOS transistors alongside low-voltage CMOS logic on a single die, eliminating the need for a logic-level shifter supply and simplifying board-level power-tree design. Each switch is independently controlled by a TTL/CMOS-compatible digital input, and all four channels exhibit matched on-resistance and ton/toff timing for synchronized multi-channel sampling.
Typical applications include precision data-acquisition front ends, audio and video signal routing, automated test equipment (ATE) multiplexers, medical instrumentation, communication systems, and battery-powered multi-channel sensor switching where charge injection and input capacitance directly affect measurement integrity.
When designing with this device, place 0.1 µF or larger decoupling capacitors as close as possible to the VDD and VSS pins, and keep digital control traces isolated from analog signal paths to preserve the low charge-injection and low distortion performance. The TSSOP-16 footprint is compatible with ADG1211YRUZ and ADG1212YRUZ variants for design reuse across NC/NO options.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single-source engineering reference for the ADG1213YRUZ.
ドロップイン代替品: ADG1213YRUZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
ADG1213YRUZ-REEL7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADG1211YRUZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADG1212YRUZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADG1206YRUZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADG1208YRUZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMUX6113PWR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADG1213YRUZ 最大定格＆電気的特性
| Number of Channels | 4 (Quad SPST) |
| Switch Configuration | SPST (depends on grade - ADG1213 contains 2 NO + 2 NC) |
| On Resistance (RON) | 120 Ω typical |
| Off Capacitance (CD off) | 1 pF |
| On Capacitance (CD on) | 2.6 pF |
| Charge Injection | <1 pC |
| Supply Voltage Range (Dual) | ±4.5 V to ±16.5 V |
| Supply Voltage Range (Single) | Up to +12 V (33 V max supply range) |
| Logic Compatibility | 3 V logic-compatible inputs, no V_L required |
| Signal Range | Rail-to-rail |
| Power Consumption | <0.03 µW typical |
| パッケージ | 16-TSSOP (0.173 inch / 4.40 mm width) |
| 実装タイプ | Surface Mount |
| Lead Free / RoHS | Lead Free, RoHS Compliant |
ADG1213YRUZ ピン構成
| ピン 1 | S1A — Source pin for switch 1 (Channel A side) |
| ピン 2 | IN1 — Logic control input for switch 1 |
| ピン 3 | S2A — Source pin for switch 2 (Channel A side) |
| ピン 4 | IN2 — Logic control input for switch 2 |
| ピン 5 | S3A — Source pin for switch 3 (Channel A side) |
| ピン 6 | IN3 — Logic control input for switch 3 |
| ピン 7 | S4A — Source pin for switch 4 (Channel A side) |
| ピン 8 | IN4 — Logic control input for switch 4 |
| ピン 9 | VSS — Negative supply voltage (or GND for single supply) |
| ピン 10 | GND — Ground reference |
| ピン 11 | S4B — Drain pin for switch 4 (Channel B side) |
| ピン 12 | S3B — Drain pin for switch 3 (Channel B side) |
| ピン 13 | S2B — Drain pin for switch 2 (Channel B side) |
| ピン 14 | S1B — Drain pin for switch 1 (Channel B side) |
| ピン 15 | VDD — Positive supply voltage |
| ピン 16 | NC — Not connected (per datasheet, exposed pad pin) |
主な用途
ADG1213YRUZ の用途: 6 件s: Precision Data Acquisition Front End, Audio Signal Routing and Mixing, Automated Test Equipment (ATE) Multiplexers, Medical Instrumentation Signal Paths, Communication System RF and Baseband Routing, Battery-Powered Multi-Channel Sensor Switching.
Precision Data Acquisition Front End
The ADG1213YRUZ fits precision data-acquisition front ends through its four independently selectable SPST channels with sub-1 pC charge injection and 1 pF off capacitance, which preserve sample-and-hold integrity on the ADC input capacitor. When placed between a multiplexer output and the ADC driver, the switch's <1 pC charge injection prevents the voltage droop on the hold capacitor that would otherwise introduce gain error in successive-approximation ADCs. The 120 Ω on resistance introduces minimal series loss, and the rail-to-rail signal range allows direct switching of bipolar sensor signals without level shifting. For 16-bit and 18-bit ADC front ends (e.g., AD7606, AD7771) where each LSB represents microvolts, the ADG1213YRUZ's low capacitance and low leakage help maintain SNR and DC accuracy across the full input range. The TSSOP-16 footprint enables high-density multi-channel DAQ layouts.
おすすめ
Audio Signal Routing and Mixing
The ADG1213YRUZ is well matched to audio signal routing because its 120 Ω on resistance is flat across the audio band and its 0.03 µW typical power dissipation adds negligible thermal noise to high-gain audio paths. With ±15 V supply operation, the device can switch line-level audio signals directly without coupling capacitors or level translators, simplifying PCB layout in mixers and audio test equipment. The sub-1 pC charge injection ensures click-free switching, important when the SPST is used for muting, source selection, or panning. The rail-to-rail signal handling allows the switch to pass signals up to VDD without clipping, supporting balanced +24 dBu professional audio when operating from ±15 V. For audiophile DAC output switching (e.g., PCM1794A outputs), the ADG1213YRUZ provides lower distortion than 74HC-series switches, which introduce significant harmonic distortion at high signal amplitudes.
おすすめ
Automated Test Equipment (ATE) Multiplexers
The ADG1213YRUZ suits ATE multiplexer cards where the four SPST channels can be configured in series-parallel for arbitrary relay-replacement topologies. Its 33 V maximum supply range allows switching of ±16.5 V stimulus signals used in semiconductor parametric testing, while the 3 V logic-compatible inputs interface directly with modern FPGA control planes (e.g., without level shifters). Each channel's <1 pC charge injection is critical when the switch feeds a sensitive measurement instrument such as a source-measure unit (SMU) or precision ADC, where switching transients would otherwise appear as DUT leakage. The TSSOP-16 footprint supports dense pin cards with hundreds of channels per square inch. Compared to electromechanical relays, the ADG1213YRUZ offers >1000x faster switching (sub-microsecond vs millisecond) and unlimited mechanical life, dramatically increasing ATE throughput.
おすすめ
Medical Instrumentation Signal Paths
The ADG1213YRUZ fits medical instrumentation front ends because of its low leakage, rail-to-rail signal handling, and ability to switch biopotential signals (ECG, EMG, EEG) directly with minimal distortion. The 1 pF off capacitance prevents loading of high-impedance electrode sources, while the <1 pC charge injection avoids stimulation artifacts when switching between patient monitoring leads. Operating from ±15 V supplies, the switch can handle the full dynamic range of amplified biosignals without saturation, and the 3 V logic inputs allow direct control from low-power microcontrollers. For portable patient monitors, the 0.03 µW typical power consumption contributes negligibly to battery drain. The RoHS-compliant lead-free TSSOP-16 package meets medical device environmental requirements, and the iCMOS process provides the reliability required for FDA-approved diagnostic equipment.
おすすめ
Communication System RF and Baseband Routing
The ADG1213YRUZ handles baseband signal routing in communication systems where its flat 120 Ω on resistance and low capacitance minimize amplitude and phase distortion across the IF/baseband spectrum. The four SPST channels can route I/Q baseband signals between modulators, demodulators, and ADC/DAC stages without introducing image artifacts from switch-induced charge injection. The ±15 V dual-supply operation allows direct switching of high-linearity RF signal chain outputs up to several hundred MHz, where on-resistance flatness preserves EVM (Error Vector Magnitude) in modulation-accuracy-sensitive paths. The 33 V maximum supply range supports infrastructure-grade equipment where board-level voltage rails may include transient spikes. Compared to GaAs RF switches, the ADG1213YRUZ offers lower cost and integrated CMOS control logic for direct microcontroller interfacing.
おすすめ
Battery-Powered Multi-Channel Sensor Switching
The ADG1213YRUZ's typical power consumption below 0.03 µW makes it ideal for battery-powered IoT and sensor systems that must switch between multiple analog sensor channels while extending battery life over years. Each of the four SPST channels can connect a different sensor (temperature, pressure, gas, current) to a shared ADC, dramatically reducing ADC count and BOM cost compared to per-sensor ADCs. The 3 V logic-compatible inputs allow direct connection to microcontroller GPIO pins without level translators or external pull-ups, simplifying low-power design. The TSSOP-16 footprint occupies minimal board area for space-constrained wearable or IoT designs, and the lead-free RoHS package meets consumer electronics environmental standards. For example, in a multi-sensor environmental monitor, the ADG1213YRUZ can sequence a thermistor, a humidity sensor, and two gas sensors through a single 24-bit sigma-delta ADC with negligible contribution to the system power budget.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADG1213YRUZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADG1213YRUZ-REEL7 | ADG1211YRUZ | ADG1212YRUZ | ADG1206YRUZ | TMUX6113PWR |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Package | 16-TSSOP | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same | TSSOP-16 (PW) - same |
| Number of Channels / Topology | 4x SPST (2 NO + 2 NC for ADG1213) | 4x SPST (same) | 4x SPST (all NO) | 4x SPST (all NC) | 16-channel mux (different topology) | 1:1 SPST (verify ch count) |
主な差別化要因
- Sub-1 pC charge injection with iCMOS architecture （vs TMUX6113PWR)
- 33 V maximum supply range with no V_L required （vs ADG1206YRUZ)
- Pin-compatible with ADG1211YRUZ and ADG1212YRUZ for design reuse （vs ADG1212YRUZ (NC version))
設計ノート
Place 0.1 µF decoupling capacitors as close as possible to the VDD (pin 15) and VSS (pin 9) pins. Add a bulk 10 µF tantalum or ceramic capacitor on the VDD rail within 25 mm of the device to suppress supply transients during high-speed switching. The ADG1213YRUZ has no V_L supply pin, so the 3 V logic inputs are powered directly from the VDD supply's internal level shifter; this simplifies the power tree but requires VDD to be present before digital control signals are valid.
Route the digital control traces (IN1-IN4, pins 2, 4, 6, 8) on a separate layer or keep them physically isolated from the analog signal traces (S1A-S4A, S1B-S4B). The TSSOP-16 package pinout conveniently places all logic inputs on one side (left) and analog pins on the other (right), facilitating clean signal routing. Use a ground guard ring around the analog signal pins if the design operates at high source impedances (>10 kΩ) to minimize leakage-induced DC error.
For source impedances above 1 kΩ, the 1 pF off capacitance of the ADG1213YRUZ creates a -3 dB pole above 100 kHz, which can be exploited as an anti-aliasing filter but may also limit bandwidth. For precision 16-bit+ ADC front ends, add a buffer amplifier (e.g., AD8676BRMZ) immediately after the switch to drive the ADC input capacitor without loading-dependent gain error. The <1 pC charge injection specification is a typical figure; verify in-system performance with the actual source impedance and load capacitance.
Do not exceed the absolute maximum supply voltage of ±16.5 V on VDD/VSS or the device may suffer permanent damage. For single-supply operation, VSS must be tied to GND and VDD can range from +4.5 V to +16.5 V. Avoid powering the device without the analog ground (pin 10) connected; floating GND will cause unpredictable switch states. The exposed pad (pin 16, NC) on the LFCSP variant should be soldered to the PCB ground plane for thermal dissipation, but on the TSSOP-16 (YRUZ) it is an unconnected pin.
コンプライアンス情報
Lead Free and RoHS Compliant per DigiChip specifications. EU RoHS and REACH compliant per Abacus Technologies listing. DRC Conflict Free status reported. AEC-Q100 not applicable for this industrial/consumer analog switch grade.
