ADS1201U/1K - 24-Bit 1kSPS Delta-Sigma ADC | Texas Instruments
部品番号: ADS1201U/1K ✓ 生産中ADS1201U/1K 概要
A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling, noise shaping, and digital decimation to achieve high resolution. In the broader hierarchy, the ADS1201U/1K belongs to the ADC/DAC category, specifically the high-dynamic-range delta-sigma modulator class. It is commonly positioned ahead of a digital filter or microcontroller in a measurement signal chain.
The key specifications are 24-bit nominal resolution, a 1 kSPS sampling rate, and a serial interface. These features make the converter appropriate for slow, precision-oriented measurements rather than high-bandwidth waveform acquisition. The modulator architecture helps reduce the influence of quantization noise within the selected digital-filter bandwidth, while the serial output supports compact embedded systems and programmable filter implementations.
The ADS1201U/1K is identified as an industrial-use component with a nominal 5 V supply and an operating temperature range of -40 °C to +85 °C. Its 16-pin SOIC package supports conventional surface-mount assembly. The device operates as a modulator rather than as a conventional standalone ADC with an integrated digital decimation filter, so system performance depends strongly on the selected digital filter, clocking arrangement, reference implementation, and analog input conditioning.
Typical applications include precision bridge and load-cell measurements, industrial pressure and temperature acquisition, low-frequency sensor monitoring, and measurement systems requiring a clean serial output for later digital filtering. In each case, the 1 kSPS rate favors applications whose useful information bandwidth is much lower than the raw modulator clock rate.
A critical design consideration is input and reference stability. Use appropriate low-noise decoupling, keep analog and digital return currents separated, and design the digital decimation filter for the intended output bandwidth. Confirm clock frequency, bit timing, and serial interface levels against the manufacturer datasheet before releasing the PCB.
This page combines the component identity, verified distributor observations, package information, application guidance, and drop-in replacement analysis to support faster engineering evaluation and sourcing decisions.
ドロップイン代替品: ADS1201U/1K — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADS1201U/1K (同一形状・フットプリント) — 相違点: Package.
ADS1201U-1/1K
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADS1201U-1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ADS1201U/1K 最大定格&電気的特性
| Device Type | 24-bit high-dynamic-range delta-sigma modulator |
| Nominal Resolution | 24 bit |
| サンプリングレート | 1 kSPS |
| インターフェースタイプ | Serial |
| パッケージ | 16-pin SOIC |
| 実装タイプ | Surface mount |
| Nominal Supply Voltage | 5 V |
| 動作温度範囲 | -40 °C to +85 °C |
| Application Classification | Industrial |
| Converter Architecture | Delta-sigma modulator |
ADS1201U/1K 16-pin soic ピン配置ガイド
ADS1201U/1K (16-pin soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: ADS1201U/1K.
詳細は データシート をご参照ください。
主な用途
ADS1201U/1K の用途: 6 件s: Precision Load-Cell Measurement, Industrial Pressure Transducer Interface, Temperature and Thermocouple Acquisition, Battery-Powered Sensor Node, Precision Current Measurement, Data Acquisition and Instrumentation.
Precision Load-Cell Measurement
The ADS1201U/1K fits low-frequency bridge measurements where a 24-bit nominal resolution and 1 kSPS rate provide ample conversion time for digital filtering. Its delta-sigma modulator output can be routed to a programmable filter or MCU for decimation. The signal chain requires a low-noise reference, careful excitation supply filtering, and differential input conditioning to preserve the small bridge output. Because the device operates as a modulator, selected filter bandwidth and clocking determine the final noise performance, while the SOIC package supports conventional industrial board assembly.
おすすめ
Industrial Pressure Transducer Interface
The ADS1201U/1K is suitable for pressure and process-transducer interfaces whose useful signals change slowly compared with the raw modulator clock. A 24-bit nominal conversion and 1 kSPS sampling rate allow narrow digital decimation to suppress out-of-band noise. The analog stage should provide low-noise excitation and input filtering, while the serial output connects conveniently to an embedded controller. Its -40 °C to +85 °C operating range supports industrial equipment, subject to the complete system thermal and calibration requirements.
おすすめ
Temperature and Thermocouple Acquisition
The ADS1201U/1K can serve as the conversion stage in a temperature-measurement channel when the thermocouple or resistive sensor signal changes at a rate compatible with 1 kSPS. The nominal 24-bit resolution supports fine digital correction and filtering, while the serial interface limits the required MCU I/O. Design the input protection, cold-junction compensation, reference network, and grounding so that sensor excitation and converter noise do not obscure small temperature changes. Final error budget depends on the selected digital-filter bandwidth.
おすすめ
Battery-Powered Sensor Node
The ADS1201U/1K is appropriate for battery-powered environmental sensors that periodically acquire slow analog measurements. The 1 kSPS rate is fast enough for many temperature, humidity, and gas-sensing systems but allows decimation when the required measurement bandwidth is much lower. Power architecture and duty cycling remain important because the converter's complete supply-current profile must be considered across the acquisition interval. A stable reference, controlled wake-up timing, and local bypass capacitors help maintain repeatable results between readings.
おすすめ
Precision Current Measurement
The ADS1201U/1K can be used downstream of a precision shunt amplifier for low-bandwidth current measurements in power monitoring and laboratory equipment. Its 24-bit nominal resolution and serial modulator output support digital filtering that can improve effective in-band noise performance. The design must control amplifier offset, shunt self-heating, reference drift, and ground differences because these effects can dominate the converter's nominal resolution. A fixed-rate acquisition path or scheduled measurement interval is generally easier to filter than a continuously varying high-bandwidth waveform.
おすすめ
Data Acquisition and Instrumentation
The ADS1201U/1K is well suited to modular data-acquisition instrumentation requiring high nominal resolution rather than high throughput. The serial output allows the modulator stage to feed a digital filter, FPGA, or microcontroller, enabling adjustable bandwidth and calibration functions. The 16-pin SOIC package is practical for analog measurement boards, but analog and digital sections should be partitioned to prevent clock and return-current coupling from degrading low-level inputs. Verify interface timing and implement a digital-filter settling strategy before every acquisition.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADS1201U/1K — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADS1201U-1/1K | ADS1201U-1 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Converter Architecture | High-dynamic-range delta-sigma modulator | Delta-sigma modulator | Delta-sigma modulator |
| Lifecycle Context | Active ordering designation | Active related ordering designation | Described as active in a manufacturer support discussion |
| Ordering Suffix | /1K | -1/1K | -1 |
主な差別化要因
- Closest catalog replacement preserves the principal conversion specifications (vs ADS1201U-1/1K)
- Related ordering designation with active lifecycle context (vs ADS1201U-1)
- No confirmed cross-brand drop-in option avoids risky cross-vendor migration (vs Cross-brand equivalent)
設計ノート
Treat the modulator clock and serial data as sensitive timing signals even though the nominal output rate is only 1 kSPS. Route clock and data away from sensitive analog inputs, use a continuous ground reference, and avoid routing them beneath the measurement front end. The final digital-filter and settling behavior must be coordinated with the selected clock frequency to prevent incomplete conversions.
Place all required bypass capacitors immediately beside their associated supply pins, with the shortest practical ground-return path. Keep analog input traces short and isolate them from serial clock and data routing. If the converter uses an external reference, provide local decoupling and a low-noise reference path; reference disturbance can directly affect the measured conversion result.
Do not treat the 24-bit modulator resolution as usable 24-bit accuracy without specifying the decimation bandwidth, clock configuration, reference quality, analog gain, and filter settling time. A wider digital-filter bandwidth admits more noise, while excessive filtering can reduce responsiveness. Validate the complete signal-to-noise and settling performance in the final system configuration.
Calculate the complete analog-front-end and digital-interface power budget before assigning the measurement duty cycle. The converter's supply-current limits and settling requirements should be taken from the manufacturer datasheet, while regulator efficiency and capacitor sizing should be treated as engineering estimates. Sequence the reference and digital interface so that every conversion begins from a stable operating state.
コンプライアンス情報
The product is described as an industrial-use ADC. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was available for this exact ordering designation.