Texas Instruments

ADS7834PB - 12-Bit 500 kHz ADC | Texas Instruments

部品番号: ADS7834PB ✓ 生産中
2.5 V Vdss 8-pin PDIP Package
MOQ: 1 |

ADS7834PB 概要

The Texas Instruments ADS7834PB is a 12-bit, 500 kHz sampling analog-to-digital converter with a 2.5 V input range, supplied in an 8-pin PDIP package for through-hole industrial and instrumentation designs. The converter supports single-channel analog input and is intended for data-acquisition systems that require moderate resolution, rapid sampling, and low-power operation.

An ADC, or analog-to-digital converter, is a semiconductor that transforms a continuously varying analog voltage into a numeric value for processing by a microcontroller, DSP, PLC, or measurement instrument. The ADS7834PB belongs to the data-converter IC hierarchy and the ADC family, combining a 12-bit resolution, 500 kHz sampling capability, and serialized digital output in a compact eight-pin package.

Its 12-bit conversion resolution produces 4096 discrete codes across the 2.5 V input range, corresponding to approximately 0.61 mV per code when referenced directly to that range. The 500 kHz sampling rate supports acquisition of rapidly changing signals, while the serial interface reduces the number of data pins required in systems with limited connector and PCB space. A stated full-scale error of 0.0244% supports precision-oriented measurement designs.

The ADS7834PB operates from a 5 V supply and is specified over the -40 °C to +85 °C industrial temperature range. Its 8-pin PDIP package supports conventional through-hole assembly and is practical for prototypes, laboratory instruments, industrial controllers, and data-acquisition boards where a surface-mount footprint would not simplify assembly.

Typical uses include sensor signal capture, process-control monitoring, laboratory measurement, industrial data logging, and embedded instrumentation. When designing around this converter, account for the acquisition system’s source impedance, reference accuracy, analog input filtering, digital-interface timing, and grounding. The 500 kHz conversion capability should also be distinguished from the complete system sample rate, which can be limited by digital communication and post-processing.

This page combines manufacturer specifications, practical application guidance, package considerations, and a structured comparison with same-brand candidate converters. Use the Texas Instruments ADS7834 product page and device datasheet for the authoritative pin description, timing definitions, reference requirements, and application circuit before final PCB implementation.

ドロップイン代替品: ADS7834PB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

ADS7832PB

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin PDIP
Same 12-bit resolution and 500 kHz sampling-class positioning; input or timing details require pin-level confirmation.

📋 参考代替品(カタログ未掲載)

ADS7836PB

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin PDIP
Same 12-bit conversion family and 8-pin PDIP format; channel configuration differs by up to 2 channels.

📋 参考代替品(カタログ未掲載)

ADS7838PB

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin PDIP
Same 12-bit conversion family and 8-pin PDIP format; channel configuration differs by up to 4 channels.

📋 参考代替品(カタログ未掲載)

ADS7804PB

✅ ドロップイン
Texas Instruments
📦 8-pin PDIP
12 bits · 100 kSPS · 8 us · 5 V · 1 channel · Successive-approximation SAR · 2's complement binary · Parallel microprocessor-compatible interface

価格はお問い合わせください

データシートを見る →

ADS7812PB

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin PDIP
Same 12-bit resolution and 8-pin PDIP format; sampling-rate difference is approximately 100%.

📋 参考代替品(カタログ未掲載)

ADS7834PB 最大定格&電気的特性

分解能 12 bit
サンプリングレート 500 kHz
Analog Input Count 1 channel
入力電圧範囲 2.5 V
電源電圧 5 V
Full-Scale Error 0.0244%
動作温度範囲 -40 °C to +85 °C
Temperature Grade Industrial
パッケージ 8-pin PDIP
実装タイプ Through-hole
Terminal Count 8 terminals
Package Shape Rectangular
Converter Type Sampling analog-to-digital converter
Digital Output Serial output
Input Type Single-ended

ADS7834PB rectangular ピン配置ガイド

ADS7834PB (rectangular パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

ADS7834PB の rectangular パッケージピン配置図

詳細なピン配置データはありません: ADS7834PB.

詳細は データシート をご参照ください。

主な用途

ADS7834PB の用途: 6 件s: Industrial Sensor Data Acquisition, Laboratory Measurement Instruments, Process Control Monitoring, Industrial Data Logging, Embedded Condition Monitoring, Educational Electronics Prototypes.

🏭

Industrial Sensor Data Acquisition

The ADS7834PB suits acquisition boards that monitor low-bandwidth or moderately dynamic industrial sensor signals. Its 12-bit resolution provides 4096 codes, while the 500 kHz conversion rate allows the front end to sample faster than many process-control loops require. A 5 V supply and an industrial temperature range of -40 °C to +85 °C fit conventional controller hardware. The analog signal must first be scaled into the 2.5 V input range, and the source impedance, acquisition time, and input filtering should be checked against the selected sensor output. An 8-pin PDIP footprint also simplifies assembly on industrial prototypes and legacy control boards.

🔧

Laboratory Measurement Instruments

For laboratory meters, calibration equipment, and bench-top data loggers, the ADS7834PB combines 12-bit measurement resolution with a 500 kHz conversion capability. This allows a compact instrument to acquire a sensor or reference waveform without adopting a larger multi-channel converter. The 2.5 V analog range should be mapped carefully because it defines the usable signal span and nominal code width. Designers should use the manufacturer application information to select input capacitance and conditioning components, while the serial output supports communication with a measurement controller. Its PDIP package is particularly useful in educational and prototype instruments assembled with through-hole techniques.

⚡

Process Control Monitoring

The ADS7834PB can serve as the acquisition element in a process-control module that monitors pressure, temperature, position, or analog process signals. Its 500 kHz conversion capability provides margin above typical slow control-loop sampling rates, while 12-bit resolution supports moderate-resolution feedback or supervisory monitoring. Inputs should be conditioned to remain within the 2.5 V range and to meet the converter’s settling requirements. Industrial operation from -40 °C to +85 °C supports equipment deployed beyond room temperature. The 8-pin PDIP package makes the device practical for legacy PLC or controller boards that lack space for a large surface-mount footprint.

🖥️

Industrial Data Logging

A compact logger built around the ADS7834PB can capture changing analog channels for trend analysis, fault records, or production diagnostics. The 500 kHz conversion rate offers useful timing margin when multiple signal phases must be sampled, and the 12-bit format balances measurement detail against serial-data throughput. The actual logging rate remains limited by the serial interface and storage controller, so interface timing should not be confused with converter throughput. Use a 5 V regulated supply, provide filtering appropriate to the sensor bandwidth, and isolate analog and digital return paths where noise could affect the 2.5 V measurement range.

📱

Embedded Condition Monitoring

The ADS7834PB is suitable for condition-monitoring modules that digitize vibration, position, or load-related analog signals. Its 500 kHz sampling capability supports acquisition of signals with more bandwidth than a slow telemetry system normally handles, while 12-bit resolution provides sufficient amplitude detail for many diagnostic thresholds. Signal conditioning remains essential: the transducer output should be scaled into the 2.5 V range, protected from transients, and filtered to balance noise against bandwidth. The industrial temperature range and through-hole package suit ruggedized controller designs assembled with conventional through-hole components.

🧩

Educational Electronics Prototypes

The ADS7834PB works well in university and maker prototypes that demonstrate analog sampling, sensor interfaces, and embedded measurement. Its 500 kHz conversion capability exposes the complete acquisition chain without requiring a complex high-speed converter, while 12-bit results can be displayed directly as digital codes or engineering units. The 2.5 V range must be respected by adjusting potentiometers, dividers, or active sensor amplifiers before connection. The 8-pin PDIP package is easy to install on perfboard and through-hole teaching platforms. Firmware should follow the manufacturer’s serial-interface timing and add calibration if higher absolute accuracy is required.

おすすめ製品の概要

ADS7834PB Texas Instruments 使用用途: Industrial Sensor Data Acquisition, Laboratory Measurement Instruments, Process Control Monitoring, Industrial Data Logging, Embedded Condition Monitoring, Educational Electronics Prototypes ADS7804PB Texas Instruments 使用用途: Industrial Sensor Data Acquisition, Process Control Monitoring ADS7832PB Same-family through-hole converter candidate 使用用途: Laboratory Measurement Instruments ADS7838PB Same-family multi-channel comparison candidate 使用用途: Industrial Data Logging ADS7836PB Same-family channel-count comparison candidate 使用用途: Embedded Condition Monitoring ADS7812PB Through-hole ADC performance-comparison candidate 使用用途: Educational Electronics Prototypes
What are the key specifications of ADS7834PB that engineers should know?
The ADS7834PB is a 12-bit, 500 kHz sampling ADC with one analog input, a 2.5 V input range, and a 5 V supply. It is packaged in an 8-pin PDIP and rated for operation from -40 °C to +85 °C. According to the Texas Instruments ADS7834 product page, the device is intended for high-speed, low-power data-conversion applications, making its resolution, throughput, supply requirements, and through-hole package the principal selection criteria.
Where can I download the ADS7834PB datasheet PDF?
The official ADS7834 datasheet is accessible through the Texas Instruments ADS7834 product page at https://www.ti.com/product/ADS7834. The manufacturer page provides the primary technical documentation, ordering information, and parameter details. For the ADS7834PB PDIP orderable, use the package and ordering-option information to identify the exact 8-pin through-hole configuration before using the pin-description and application information in the design.
Where can I find the ADS7834PB pinout?
The ADS7834PB pinout is documented in the pin-configuration section of the Texas Instruments ADS7834 datasheet. The device uses an 8-pin PDIP package, and the datasheet is the controlling document for pin numbering, signal names, analog inputs, reference connections, power rails, and digital communication signals. Because the complete pin assignment is not printed on the product-page summary, use the manufacturer PDF when assigning PCB tracks and verifying polarity.
What is the sampling rate of the ADS7834PB?
The ADS7834PB has a maximum sampling rate of 500 kHz. This figure represents the converter’s analog-to-digital conversion capability, while the effective acquisition rate of a complete system may be lower because of serial-interface overhead, data processing, buffering, and trigger timing. According to the Texas Instruments ADS7834 product page, the 500 kHz rate and 12-bit resolution position the device for fast data acquisition.
What is the output resolution of ADS7834PB?
The ADS7834PB provides 12-bit output resolution, corresponding to 4096 possible digital codes. When mapped directly across a 2.5 V input range, one code represents approximately 0.61 mV before accounting for errors elsewhere in the signal chain. Texas Instruments describes ADS7834 as a 12-bit high-speed, low-power sampling ADC, making resolution and throughput the key parameters for precision acquisition.
Can ADS7834PB be used for industrial instrumentation?
Yes, the ADS7834PB is suitable for industrial instrumentation because it is specified over -40 °C to +85 °C and uses an industrial temperature grade. Its 12-bit resolution and 500 kHz sampling rate support moderate-resolution measurement of process, sensor, and diagnostic signals. The 5 V supply and 8-pin PDIP package also align with conventional laboratory and industrial through-hole controller boards.
What can replace ADS7834PB on an existing PCB?
ADS7832PB is the closest same-family replacement candidate because it uses the 8-pin PDIP format and belongs to the Texas Instruments ADS783x converter family. Compatibility still depends on matching the exact analog range, conversion timing, reference arrangement, serial interface, and pin names. Confirm those functions against both datasheets before production use; otherwise, use the Request a Quote form on this page to request help identifying a verified substitute.
Is ADS7804PB the same as ADS7834PB?
ADS7804PB is not automatically interchangeable with ADS7834PB. ADS7804PB also appears as an 8-pin PDIP ADC candidate, but pin-level compatibility depends on its input architecture, reference configuration, timing, and serial interface matching the ADS7834PB footprint. The manufacturer cross-reference search is the appropriate starting point, and every substitution should be checked against the exact ADC pin description and acquisition timing requirements.
ADS7834PB vs ADS7832PB: which is better for a data-acquisition board?
Choose ADS7834PB when the design requires its documented 12-bit resolution, 500 kHz conversion rate, 2.5 V input range, and specified interface behavior. ADS7832PB may be suitable when its electrical ratings and pin functions match the existing board, but resolution alone does not establish interchangeability. Compare input range, conversion timing, reference implementation, serial protocol, power requirements, and pin assignments before selecting the lower-complexity alternative.
When should I choose ADS7834PB over ADS7804PB?
Choose ADS7834PB when its 500 kHz sampling capability, 12-bit resolution, and 2.5 V input range match the measurement specification more closely. ADS7804PB should be selected only after its pinout and timing are confirmed as compatible with the intended PCB and acquisition system. The decision should be based on functional alignment rather than package appearance, because equal package dimensions do not guarantee identical signal assignments.
Is ADS7834PB suitable for a 5 V industrial sensor input?
ADS7834PB can be used when the sensor signal is scaled into its 2.5 V input range and the system operates from a 5 V supply. Protection, filtering, settling time, and source-impedance requirements must be checked to ensure that the analog front end does not distort the sampled signal. The Texas Instruments ADS7834 documentation provides the device-level electrical limits and application guidance needed for that interface design.
What is the best Texas Instruments equivalent for ADS7834PB?
ADS7832PB is the leading same-family Texas Instruments candidate for an 8-pin PDIP board because it offers a closely related ADS783x architecture. It is a qualified replacement candidate rather than an unconditional substitute until the ADC pinout, electrical range, conversion timing, and serial interface are compared. Use the manufacturer cross-reference search and datasheets for final approval of any second-source component.
How should I design the analog input for ADS7834PB?
Scale the sensor output into the converter’s 2.5 V input range, then use an input network that limits out-of-band noise and controls settling behavior. Include protection appropriate to the measured signal, keep the analog trace short, and return its ground reference directly to the converter ground plane. The manufacturer application information should define the required source impedance and input-capacitance limits for the selected acquisition rate.
What are the power and thermal considerations for ADS7834PB?
ADS7834PB operates from a 5 V supply and is specified across the industrial temperature range of -40 °C to +85 °C. Because it uses a through-hole PDIP package, normal board ventilation is usually more important than a compact SMD thermal strategy. Determine actual dissipation from the operating current and supply voltage, then account for the socket or PCB thermal resistance when the ambient temperature approaches the upper rating.
Where can I request a quote and current lead time for ADS7834PB?
Use the Request a Quote form on this page to request current availability, lead time, and order handling for ADS7834PB. The form is the appropriate route for a firm quotation and quantity-specific supply confirmation. The 8-pin PDIP package is the identified commercial configuration, while current production status and delivery timing should be confirmed through the quotation response.

エンジニアリング参考データ: ADS7834PB — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ADS7834PB for a through-hole, single-channel acquisition design that requires 12-bit resolution, a 500 kHz conversion rate, a 2.5 V input range, and operation from a 5 V supply across -40 °C to +85 °C. ADS7832PB is a logical same-family candidate when its channel arrangement and interface timing match the board. ADS7836PB or ADS7838PB may be preferable when additional channels are valuable, provided their input architecture remains compatible. ADS7804PB warrants consideration when its timing, reference arrangement, and acquisition behavior meet the system requirement. ADS7812PB is appropriate when twice the sampling rate is valuable. Because package size and nominal resolution do not guarantee electrical interchangeability, verify every pin, timing parameter, input range, and output protocol before approving a replacement.

代替品との比較

パラメータ この製品 ADS7832PB ADS7836PB ADS7838PB ADS7804PB ADS7812PB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit
Digital Output Serial output Serial output Serial output Serial output Serial output Serial output
Special Features Low-power 500 kHz sampling Same-family low-power conversion Expanded channel configuration Expanded channel configuration Single-channel converter Higher sampling-rate capability

主な差別化要因

  • Balanced conversion speed and resolution (vs ADS7812PB)
  • Documented 2.5 V input range (vs ADS7804PB)
  • Industrial through-hole package (vs ADS7838PB)

設計ノート

Keep the analog input trace short and connect the input-network ground return directly to the converter ground. Use the manufacturer application circuit to select input capacitance and confirm the source-impedance limit for the selected conversion rate. A long trace or excessive source impedance can allow charge from the sampling capacitor to remain between conversions, producing errors that appear as unstable readings.

Separate analog input routing from serial clock and data lines, and place the converter close to the source-conditioning components. A solid ground plane reduces return-path disturbance, while keeping switching nodes and high-current supply paths away from the 2.5 V analog range helps prevent conversion errors. Check the datasheet pin-description table and recommended application layout before assigning tracks around the 8-pin PDIP footprint.

Decouple the 5 V supply near the converter and route return current through the same power-entry region to limit supply-loop area. Verify that the selected bypass network is suitable for the converter’s acquisition and clocking behavior. If the analog source is referenced to another supply or ground domain, include an appropriate buffer or isolation stage rather than allowing the input to exceed the device’s absolute limits.

Do not treat the 500 kHz conversion specification as a guaranteed end-to-end logging rate. Serial transfer time, controller processing, trigger handling, and data storage can reduce the achieved acquisition rate. Also verify input range, reference behavior, clock requirements, and pin names when considering another 8-pin PDIP ADC; matching the package outline alone does not guarantee a drop-in substitution.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The industrial temperature rating is known, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact orderable.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ADS7834PB ADS7834PB datasheet ADS7834PB datasheet pdf ADS7834PB pinout ADS7834PB specifications ADS7834PB 500 kHz ADC ADS7834PB PDIP-8 ADS7834PB equivalent ADS7834PB replacement ADS7834PB cross reference ADS7834PB vs ADS7804PB ADS7834PB price Texas Instruments ADS7834PB ADS7834PB application circuit

関連部品&用語

Texas Instruments ADS7834 ADS7834PB ADS7832PB ADS7836PB ADS7838PB ADS7804PB ADS7812PB analog-to-digital converter ADC data-converter IC sampling ADC 12-bit resolution 500 kHz sampling rate 2.5 V input range 5 V supply voltage PDIP-8 through-hole package serial output industrial instrumentation sensor data acquisition process monitoring industrial temperature grade RoHS REACH
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示