ADSP-2100JP - 12.5 MIPS 24.576 MHz DSP | Analog Devices
部品番号: ADSP-2100JP ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
ADSP-2100JP 概要
A digital signal processor is a specialized microprocessor architecture optimized for repetitive numerical operations on sampled audio, communications, control, and instrumentation data. DSP processors combine a Harvard-style architecture, high-throughput computational units, data address generators, and program memory organization to execute filtering, transforms, mixing, modulation, and real-time control algorithms efficiently. Within the broader hierarchy, the ADSP-2100JP belongs to the DSP microprocessor and embedded signal-processing semiconductor categories.
The principal verified features are a 24-bit processor, a 24.576 MHz clock rating, 12.5 MIPS throughput, external program and data memory interfaces, and a QFP-100 plastic package. Its fixed-point architecture emphasizes deterministic real-time operation rather than general-purpose software flexibility. The 100-pin package also provides substantially more interface capacity than a small microcontroller package, supporting integration of memory buses, serial interfaces, timing controls, interrupts, and system I/O.
The ADSP-2100 family architecture is documented as a base for later single-chip DSP microcomputers, but the supplied records do not expose enough electrical detail to reproduce internal execution-unit behavior or memory timing without the manufacturer datasheet. Designers should therefore verify voltage rails, clock mode, wait-state requirements, bus timing, pin multiplexing, and reset behavior against the original Analog Devices documentation before schematic capture or PCB release.
Typical uses include audio processing, industrial measurement, communications modulation, vibration analysis, closed-loop control, and embedded instrumentation. The part is best suited to systems already designed around the ADSP-2100 architecture or boards requiring direct preservation of processor, memory, and peripheral behavior. Because the available market evidence does not establish a current production lifecycle, purchasing teams should confirm availability, condition, and documentation before committing a new design.
For drop-in sourcing, package identity alone is insufficient: a substitute must also match all 100 pins, supply voltages, clock requirements, memory interfaces, peripheral multiplexing, timing, and software assumptions. Keep the original PQFP footprint, power architecture, bus termination, and decoupling unchanged when qualifying any replacement, and validate it with the target system's memory and real-time signal-processing workloads.
ドロップイン代替品: ADSP-2100JP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストADSP-2100JP 仕様
| Product Type | Digital Signal Processor Microprocessor |
| Processor Word Width | 24 bit |
| Clock Frequency | 24.576 MHz |
| Instruction Throughput | 12.5 MIPS |
| DSP Type | Fixed Point |
| Nonvolatile Memory | External |
| Package Type | Plastic PQFP-100 |
| Alternate Package Designation | QFP-100 |
| ピン数 | 100 pins |
| 実装タイプ | Surface Mount |
| Supplier Category | Unclassified |
| RoHS ステータス | Compliant |
| Lead-Free Status | Lead Free |
ADSP-2100JP qfp-100 ピン配置ガイド
ADSP-2100JP (qfp-100 パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADSP-2100JP.
詳細は データシート をご参照ください。
主な用途
ADSP-2100JP の用途: 6 件s: Digital Audio Processing, Industrial Measurement and Instrumentation, Communications Signal Processing, Vibration and Condition Monitoring, Closed-Loop Motor and Motion Control, Legacy Test and Measurement Equipment.
Digital Audio Processing
The ADSP-2100JP fits mature fixed-point audio systems that already target its 24-bit DSP architecture and 12.5 MIPS execution rate. It can execute sampling-rate conversion, filtering, mixing, equalization, and gain control with deterministic timing. Using the processor beside existing external program and data memory preserves a known software model, while the 24.576 MHz catalog clock rating supports designs originally clocked for that configuration. Engineers must verify serial-audio timing, memory wait states, coefficient format, and signal latency against the full datasheet and original firmware.
Industrial Measurement and Instrumentation
The ADSP-2100JP is applicable to real-time measurement systems performing sensor conditioning in the digital domain, including filtering, spectral analysis, calibration, and compensation. Its 24-bit fixed-point DSP organization and 12.5 MIPS throughput provide a deterministic computational path for sampled control data. The external-memory architecture allows an established board design to retain its program and data-memory arrangement. Deployment requires validation of converter interfaces, timing margins, thermal conditions, and long-term sourcing because those details are not established by the supplied market summaries.
Communications Signal Processing
ADSP-2100JP can support communications subsystems that perform fixed-point filtering, modulation-related arithmetic, demodulation preprocessing, or speech-band signal conditioning. Its documented 24-bit word width and 12.5 MIPS throughput align with legacy designs optimized for deterministic numerical loops rather than high-level operating-system workloads. Integrating it into an existing ADSP-2100 communications board avoids changing memory maps and peripheral assignments. New designs must confirm interface timing, clocking, algorithmic throughput, and electromagnetic design because those parameters are not provided in the verified sources.
Vibration and Condition Monitoring
The ADSP-2100JP is suited to legacy vibration-analysis and condition-monitoring equipment that requires repeated fixed-point operations on high-rate sampled data. Filtering, envelope extraction, spectral calculation, trend analysis, and alarm logic can be organized as deterministic DSP tasks around the processor's 12.5 MIPS rating. A board built for this processor benefits from unchanged external memory and peripheral interfaces. Before updating obsolete equipment, verify sensor bandwidth, anti-alias filtering, ADC timing, memory capacity, and whether a newer processor would reduce lifecycle risk without requiring a redesign.
Closed-Loop Motor and Motion Control
ADSP-2100JP can evaluate fixed-point control algorithms in an existing motion-control design where the 24.576 MHz catalog clock and 12.5 MIPS throughput satisfy the required loop rate. Typical tasks include current-loop calculation, transform evaluation, filtering, speed estimation, and compensator updates. The external-memory organization permits retention of an established control firmware and data layout. Qualification should measure worst-case execution time, interrupt latency, bus contention, coefficient resolution, and safe output behavior under overload because these details are absent from the supplied records.
Legacy Test and Measurement Equipment
The ADSP-2100JP remains useful for repairing or extending legacy DSP-based test and measurement instruments whose boards are built around the ADSP-2100 architecture. It can preserve deterministic filtering, waveform analysis, correction, and communications behavior without replacing the processor, memory devices, and application firmware. The 24-bit fixed-point format and 12.5 MIPS rating are the principal verified selection data. Technicians should preserve the PQFP-100 footprint, inspect solder condition, confirm clock source and supply rails, and run the manufacturer's diagnostic sequence after replacement.
エンジニアリング参考データ: ADSP-2100JP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | Plastic PQFP-100 (QFP-100) |
| Brand | Analog Devices |
| Processor Type | Digital Signal Processor Microprocessor |
| Processor Width | 24 bit |
| Clock Frequency | 24.576 MHz |
| Instruction Throughput | 12.5 MIPS |
| DSP Arithmetic | Fixed Point |
| Nonvolatile Memory | External |
| Surface-Mount Leads | 100 pins |
| RoHS Status | Compliant |
設計ノート
Do not treat ADSP-2100AJP, ADSP-2181, or another ADSP-family processor as a direct replacement merely because the names are related. A valid substitution must match all 100 pins, supply rails, clock behavior, memory timing, interrupt mapping, peripheral multiplexing, and software behavior. The verified search results identify related devices but do not establish pin-to-pin equivalence; review the original and candidate datasheets and execute memory, interrupt, and real-time workload tests before release.
Confirm the processor supply voltage and tolerance from the full Analog Devices datasheet before designing the power system; those values are not present in the verified excerpts. Preserve the original power-rail architecture, local decoupling locations, and clock-source arrangement when repairing or reusing an ADSP-2100JP board. Because the external-memory architecture is verified, budget memory-decoupling and bus timing separately from processor core noise control rather than relying only on a generic bulk supply capacitor.
The verified package is plastic PQFP-100, so a replacement PCB must preserve the complete lead pattern and soldering geometry. For repair work, inspect pin-one orientation, lead coplanarity, adjacent pad bridging, and thermal stress before applying power. Route processor clocks and memory interfaces away from switching nodes, keep decoupling returns short, and compare the original board's layer stack and return paths with the component datasheet before copying an undocumented layout.
コンプライアンス情報
The SMR Electronics listing states lead-free and RoHS compliant. REACH, halogen-free, and conflict-minerals status were not provided. AEC-Q100 is not applicable to the verified product-class information.
