ADSP-3220JG - 32-Bit Floating-Point DSP, 8 MHz | Analog Devices
部品番号: ADSP-3220JG ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $161.08 | $161.08 |
| 10 | $161.08 | $1,610.80 |
| 100 | $161.08 | $16,108.00 |
| 500 | $161.08 | $80,540.00 |
| 1,000 | $161.08 | $161,080.00 |
ADSP-3220JG 概要
A digital signal processor is a specialized microprocessor architecture optimized for recurring operations such as filtering, transforms, modulation and waveform analysis. The ADSP-3220JG belongs to the DSP processor class within the broader embedded semiconductor and real-time signal-processing hierarchies. Its dedicated arithmetic resources help execute mathematically intensive loops while external memory and peripheral interfaces connect the processor to acquisition, control and communication systems.
Verified marketplace information identifies the device as a 32-bit floating-point DSP with a 64-bit high-speed multiplier, 8 MHz maximum clock frequency and 144 terminals. It also indicates support for 5 V power supplies and a commercial temperature grade. Its CPGA-144 ceramic package uses a PGA-144 square pin-grid form factor rather than a modern fine-pitch surface-mount package.
The processor architecture is suited to industrial control, instrumentation, communications and embedded test systems where floating-point computation is preferable to extensive software emulation. Fixed hardware multiplication accelerates DSP kernels, while the 32-bit output data-bus width can provide efficient access to external data when supported by the surrounding bus and memory system. Actual system throughput still depends on clock configuration, memory timing, instruction scheduling and software optimization.
Typical installations include sensor signal chains, communications modulation, feedback control, vibration analysis and industrial data-acquisition systems. In these applications, the ADSP-3220JG can execute sample-oriented algorithms close to the source of analog data, reducing reliance on a host processor. Designers must still provide suitable power regulation, clock generation, memory interface routing, address decoding and input/output buffering.
The principal design constraint is package availability and technology age. A 144-pin ceramic PGA footprint is mechanically and electrically different from leadless packages, so replacement requires the same pin grid, compatible supply sequencing and verified bus, software and timing compatibility. Procurement teams should also distinguish a functional processor alternative from a pin-to-pin drop-in replacement.
This page consolidates verified marketplace specifications, package constraints and sourcing information for ADSP-3220JG. It also separates documented facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate procurement and design risk before committing the legacy DSP platform to a new production board.
ドロップイン代替品: ADSP-3220JG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストADSP-3220JG 仕様
| Processor Type | 32-bit floating-point digital signal processor |
| データバス幅 | 32 bit |
| Multiplier Width | 64 bit |
| 最大クロック周波数 | 8 MHz |
| 電源電圧 | 5 V |
| Temperature Grade | Commercial |
| Maximum Operating Temperature | 70 °C |
| Number of Terminals | 144 |
| Package Code | PGA |
| Package Description | 144-CPGA ceramic pin-grid package |
| Package Shape | Square |
| 実装タイプ | Pin/PEG |
| カテゴリ | DSP peripheral |
| Qualification | Commercial grade |
ADSP-3220JG square ピン配置ガイド
ADSP-3220JG (square パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADSP-3220JG.
詳細は データシート をご参照ください。
主な用途
ADSP-3220JG の用途: 6 件s: Industrial Control Signal Processing, Communications Modulation, Industrial Data Acquisition, Vibration and Condition Monitoring, Instrumentation and Test Systems, Power and Motion Feedback Control.
Industrial Control Signal Processing
The ADSP-3220JG fits legacy industrial-control systems that perform filtering, compensation or control calculations on sampled signals. Its 32-bit floating-point architecture provides a dedicated computational format, while the verified 64-bit multiplier supports multiply-heavy kernels used in digital filters and control laws. A practical implementation would connect the processor to external memory and I/O through its 32-bit data bus and operate from a regulated 5 V supply. The processor can execute deterministic sample-oriented tasks close to sensors or actuators, reducing host-processor load. Designers must still verify memory timing, interrupt latency and I/O mapping against the manufacturer documentation.
おすすめ
Communications Modulation
The ADSP-3220JG is applicable to communications equipment built around legacy floating-point DSP hardware. Its 64-bit high-speed multiplier and 32-bit floating-point processing can support filtering, interpolation, demodulation and other repetitive numerical operations. The verified 8 MHz maximum clock sets the processor's stated clock ceiling, so designers should budget instruction cycles carefully for each sample-processing block. External data acquisition, memory and communications interfaces would surround the processor in a complete design. Replacing it with a faster modern DSP may reduce computational cost, but it also creates package, bus and firmware migration work.
おすすめ
Industrial Data Acquisition
ADSP-3220JG can serve as the real-time processing engine in a data-acquisition controller that receives sampled sensor data, performs numeric processing and transfers results to storage or communications logic. Its floating-point format is useful when dynamic range and scaling are more convenient than fixed-point management. The verified 32-bit data-bus width supports external data movement when the memory and bus timing are correctly designed. Because this processor is packaged as a 144-CPGA ceramic device, the board must provide its complete pin grid and robust thermal and mechanical support. Firmware should be validated against worst-case sample rates and interrupt timing.
おすすめ
Vibration and Condition Monitoring
The ADSP-3220JG is suitable for embedded vibration-analysis systems that collect sequential samples and calculate filters or spectral components in real time. Its 32-bit floating-point processing avoids forcing early-stage algorithms into a narrow fixed-point format, and the verified 64-bit multiplier accelerates multiply-accumulate operations central to many DSP kernels. A practical design would interface sensors through dedicated converters, place working memory near the processor and use interrupts or a deterministic DMA architecture where supported. The 8 MHz stated clock requires careful workload budgeting. New products may benefit from faster modern DSPs, but retaining this processor can minimize disruption to validated legacy monitoring equipment.
おすすめ
Instrumentation and Test Systems
ADSP-3220JG can be integrated into legacy instrumentation where a floating-point processor performs real-time calibration, waveform transformation or measurement compensation. The dedicated multiplier improves throughput for common numerical expressions, while the processor architecture keeps demanding sample-processing loops away from a general-purpose host. The verified 5 V supply and commercial temperature class suit controlled indoor equipment, subject to confirmation of the full operating envelope. Integration requires external address and data buses, carefully terminated clocking, memory and I/O. For new compact instruments, a surface-mount DSP may reduce board area and assembly cost, but migration must include firmware and peripheral-driver redevelopment.
おすすめ
Power and Motion Feedback Control
The ADSP-3220JG can execute compensation and feedback algorithms in established power-control or motion-control platforms. Floating-point arithmetic allows control parameters to be tuned without extensive fixed-point scaling, and the verified 64-bit multiplier is relevant to recursive filters and proportional-integral-derivative calculations. The implementation should use deterministic acquisition and actuator-update timing, with the 8 MHz clock ceiling incorporated into the control-loop budget. The 144-CPGA footprint demands a through-hole board layout and adequate mechanical support, making modernization a larger effort than changing a small surface-mount MCU. New high-performance systems may justify migrating to a faster, smaller DSP, while mature repairs can retain the proven processor.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADSP-3220JG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Analog Devices |
| Package | 144-CPGA ceramic PGA-144 |
| Processor Architecture | 32-bit floating-point DSP |
| Data Bus Width | 32 bit |
| Multiplier Width | 64 bit |
| Maximum Clock Frequency | 8 MHz |
| Supply Voltage | 5 V |
| Maximum Operating Temperature | 70 °C |
| Terminal Count | 144 |
| Temperature Grade | Commercial |
主な差別化要因
- Dedicated 64-bit high-speed multiplier （vs Generic 32-bit floating-point DSP without verified equivalent specifications)
- Established 32-bit floating-point processing architecture （vs Newer surface-mount DSP migration candidate)
- Commercial 144-CPGA package （vs Modern leadless or QFP DSP package)
設計ノート
Treat the 144-CPGA footprint as a legacy through-hole interface, not as a generic 144-pin package. Confirm every ball, pad and pin name from the official manufacturer pinout before PCB routing. Keep the 32-bit data bus, address bus and control signals traceable, provide proper termination where required, and avoid assigning functions from similarly named ADSP devices without a documented pin-level comparison.
The verified 5 V requirement is a component-level fact, but current limits, sequencing tolerances and internal rail rules were not supplied. Use a regulated rail with design margin and verify absolute maximum conditions in the manufacturer datasheet. Estimated: if core and I/O current total I, the supply dissipation estimate is approximately 5 V × I; actual board dissipation also includes external memory and interface loads.
Do not classify a newer floating-point DSP as a drop-in replacement merely because its arithmetic width looks similar. Migration can change package geometry, bus timing, memory mapping, peripherals, interrupt priorities, boot code and toolchain libraries. For a production replacement, verify every one of the 144 pins, electrical timing, reset and boot behavior, firmware dependencies and environmental requirements before approving substitution.
コンプライアンス情報
The verified data identifies a commercial-grade processor but provides no RoHS, REACH, lead-free, halogen-free or conflict-minerals statements. AEC-Q100 is recorded as not applicable because no automotive qualification is stated.