ADUM1201BRZ-RL7 - Dual-Channel Digital Isolator | Analog Devices
部品番号: ADUM1201BRZ-RL7 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.85 | $2.85 |
| 10 | $2.56 | $25.60 |
| 100 | $2.28 | $228.00 |
| 500 | $2.05 | $1,025.00 |
| 1,000 | $1.85 | $1,850.00 |
ADUM1201BRZ-RL7 概要
Digital isolators are components that transfer digital signals across an isolation barrier, preventing DC current flow while allowing AC signals to pass. They are essential in systems where safety, noise immunity, or ground potential differences are concerns. The ADUM1201BRZ-RL7 uses monolithic transformer technology, which offers superior performance compared to traditional optocouplers, including higher data rates, lower power consumption, and better reliability.
Key features of the ADUM1201BRZ-RL7 include its 1/1 channel directionality (one forward, one reverse), a wide supply voltage range of 3.0V to 5.5V, and a propagation delay of typically 50ns. The device also features a high CMTI of 25kV/µs, ensuring reliable operation in noisy industrial environments. Its low power consumption and small package make it ideal for battery-powered and portable applications.
The ADUM1201BRZ-RL7 is designed using Analog Devices' iCoupler technology, which integrates micro-transformers and high-speed CMOS circuits on a single chip. This architecture eliminates the need for external components and provides a robust isolation solution. The device meets various safety standards, including DIN EN 60950, and is RoHS compliant.
Typical applications include motor drives, battery monitors, hybrid electric vehicles, and digital fieldbus isolation. In motor drives, the isolator protects control circuits from high-voltage transients. In battery monitoring, it ensures safe communication between cells and the controller. The device's high CMTI and data rate make it suitable for industrial automation and communication interfaces.
When designing with the ADUM1201BRZ-RL7, it is important to ensure proper PCB layout to maintain isolation performance. Keep the isolation barrier clear of copper traces and place decoupling capacitors close to the supply pins. Also, consider the propagation delay and timing requirements of your system to avoid data corruption.
ドロップイン代替品: ADUM1201BRZ-RL7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADUM1201BRZ-RL7 （同一形状・フットプリント） — 相違点: Channel Directionality, Data Rate, Operating Temperature Range, Quiescent Current (per channel).
クイック比較ツール — 並列比較する代替部品を選択:
ADUM1201BRZ
✅ ドロップイン✓ 在庫あり
$1.82 / 個
データシートを見る →ADUM1201CRZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADUM1201WTRZ-RL7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADUM1201WSRZ55-RL7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISO7721D
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ISO7721DR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ADUM1201BRZ-RL7 仕様
| Number of Channels | 2 |
| Channel Directionality | 1/1 (one forward, one reverse) |
| Isolation Voltage | 2500 Vrms |
| データレート | 10 Mbps |
| Common-Mode Transient Immunity (CMTI) | 25 kV/µs |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Propagation Delay | 50 ns (typical) |
| パッケージ | 8-SOIC (0.154", 3.90mm Width) |
| 動作温度範囲 | -40°C to +125°C |
| RoHS ステータス | Compliant |
| Safety Approvals | DIN EN 60950 |
| Technology | iCoupler (monolithic transformer) |
| 実装タイプ | Surface Mount |
| ピン数 | 8 |
| 出力タイプ | Digital |
ADUM1201BRZ-RL7 ピン構成
| ピン 1 | VDD1 — Supply voltage for side 1 |
| ピン 2 | GND1 — Ground for side 1 |
| ピン 3 | VIA — Input for channel A (side 1) |
| ピン 4 | VOB — Output for channel B (side 1) |
| ピン 5 | VIB — Input for channel B (side 2) |
| ピン 6 | VOA — Output for channel A (side 2) |
| ピン 7 | GND2 — Ground for side 2 |
| ピン 8 | VDD2 — Supply voltage for side 2 |
主な用途
ADUM1201BRZ-RL7 の用途: 6 件s: Motor Drives, Battery Monitors, Hybrid Electric Vehicles, Digital Fieldbus Isolation, Industrial Automation, Power Supplies.
Motor Drives
The ADUM1201BRZ-RL7 provides galvanic isolation between the microcontroller and power stage in motor drives. Its 2500Vrms isolation and 25kV/µs CMTI ensure reliable communication in high-voltage, noisy environments. The 10Mbps data rate supports fast PWM signals, while the 1/1 channel configuration allows bidirectional control and feedback. This isolator protects low-voltage control circuits from high-voltage transients, improving system safety and reliability.
おすすめ
Battery Monitors
In battery monitoring systems, the ADUM1201BRZ-RL7 isolates the battery stack from the control electronics, preventing ground loops and ensuring accurate voltage measurements. Its low propagation delay (50ns) and high CMTI (25kV/µs) enable reliable data transfer even in the presence of switching noise from DC-DC converters. The wide supply range (3.0V to 5.5V) allows interfacing with various battery management ICs. This isolator is essential for safe and accurate monitoring in electric vehicles and energy storage systems.
おすすめ
Hybrid Electric Vehicles
The ADUM1201BRZ-RL7 is used in hybrid electric vehicles (HEVs) to isolate communication between the high-voltage battery and the low-voltage control unit. Its automotive-grade variants (ADUM1201WTRZ-RL7) meet AEC-Q100 requirements, ensuring reliability in harsh automotive environments. The 2500Vrms isolation and 10Mbps data rate support CAN and SPI interfaces, while the compact SOIC-8 package saves PCB space. This isolator enhances safety by preventing high-voltage transients from reaching sensitive electronics.
おすすめ
Digital Fieldbus Isolation
The ADUM1201BRZ-RL7 provides isolation for digital fieldbus interfaces such as RS-485, CAN, and SPI. Its 10Mbps data rate and 50ns propagation delay ensure minimal signal distortion, while the 2500Vrms isolation protects against ground potential differences and electrical noise. The 1/1 channel configuration is ideal for bidirectional communication links. This isolator is widely used in industrial automation, building control, and process control systems where reliable data transmission is critical.
おすすめ
Industrial Automation
In industrial automation, the ADUM1201BRZ-RL7 isolates PLCs, sensors, and actuators from high-voltage power circuits. Its high CMTI (25kV/µs) ensures reliable operation in environments with fast voltage transients, such as motor drives and power converters. The wide supply voltage range (3.0V to 5.5V) allows integration with various logic levels. The device's small SOIC-8 package and low power consumption make it suitable for compact control modules. This isolator improves system reliability and safety in factory automation.
おすすめ
Power Supplies
The ADUM1201BRZ-RL7 is used in power supply designs to isolate feedback signals and control signals across the isolation barrier. Its 2500Vrms isolation and 10Mbps data rate support high-frequency switching converters, while the 25kV/µs CMTI ensures stable operation under fast voltage transients. The device's low propagation delay (50ns) minimizes signal delay in feedback loops, improving transient response. This isolator is essential for safe and efficient power conversion in applications such as server power supplies and industrial converters.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADUM1201BRZ-RL7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADUM1201BRZ | ADUM1201CRZ | ADUM1201WTRZ-RL7 | ISO7721D |
|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Isolation Voltage | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 3000 Vrms |
| Data Rate | 10 Mbps | 10 Mbps | 25 Mbps | 10 Mbps | 100 Mbps |
| CMTI | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs | 100 kV/µs |
| Propagation Delay | 50 ns | 50 ns | 30 ns | 50 ns | 11 ns |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 2.25V to 5.5V |
| Automotive Grade | No | No | No | Yes (AEC-Q100) | No |
主な差別化要因
- iCoupler technology provides superior performance over optocouplers （vs Optocoupler-based isolators)
- High CMTI of 25 kV/µs （vs ADUM1201CRZ (also 25 kV/µs))
- Automotive-grade variant available （vs ADUM1201BRZ (non-automotive))
設計ノート
For optimal isolation performance, maintain a clear area under the SOIC-8 package, free from copper traces or ground planes. This reduces parasitic capacitance and improves high-voltage isolation. Place decoupling capacitors (0.1µF) close to VDD1 and VDD2 pins to ensure stable operation.
Keep the isolation barrier (the gap between side 1 and side 2) free of any traces or components. This ensures the rated isolation voltage is maintained. Route high-voltage traces away from the isolator to avoid coupling noise. Use proper creepage and clearance distances as per safety standards.
Do not exceed the absolute maximum ratings for supply voltage (7V) or input/output voltages. Ensure that the input signals do not exceed the supply voltage. Also, avoid floating inputs; connect unused inputs to ground or supply to prevent undefined states.
コンプライアンス情報
RoHS compliant per Analog Devices datasheet. Not AEC-Q100 qualified; automotive variants available.
