ADUM3190ARWZ-RL7 - 2.5kV Isolated Error Amplifier | Analog Devices
部品番号: ADUM3190ARWZ-RL7 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.25 | $3.25 |
| 10 | $2.95 | $29.50 |
| 100 | $2.52 | $252.00 |
| 500 | $2.2 | $1,100.00 |
| 1,000 | $1.95 | $1,950.00 |
ADUM3190ARWZ-RL7 概要
An isolated error amplifier is a specialized amplifier that transfers an error signal across an isolation barrier without a direct electrical connection. It is a key component in isolated power supplies, where it compares the output voltage to a reference and sends the error signal to the primary-side controller. This enables regulation while maintaining galvanic isolation for safety and noise immunity.
Key features include a 1.225 V reference voltage, compatibility with Type II or Type III compensation networks, and low power operation of less than 7 mA total. The device supports a wide supply range of 3 V to 20 V on both VDD1 and VDD2, and provides 400 kHz bandwidth. It is available in a 16-lead SOIC-W package, offering a compact solution for isolated feedback.
The ADUM3190 uses iCoupler technology, which integrates micro-transformers to achieve isolation, eliminating the need for optocouplers and providing improved reliability and performance. The device is compatible with DOSA (Distributed-power Open Standards Alliance) standards, ensuring interoperability. It also meets safety approvals including UL 1577 and IEC/EN/CSA 62368-1.
Typical applications include shunt regulators, linear power supplies, inverters, and uninterruptible power supplies (UPS). The device is ideal for isolated feedback in AC-DC and DC-DC converters, where precise regulation and isolation are critical. Its wide supply range and low power consumption make it suitable for both industrial and consumer power systems.
When designing with the ADUM3190, ensure proper PCB layout to maintain isolation creepage and clearance distances. The device requires bypass capacitors on both supply pins to ensure stable operation. The reference voltage accuracy is critical for output regulation, so use precision resistors in the feedback network.
ドロップイン代替品: ADUM3190ARWZ-RL7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADUM3190ARWZ-RL7 （同一形状・フットプリント） — 相違点: Output Type, Package, Reference Voltage, Bandwidth, Isolation Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
ADUM3190ARWZ
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.2 / 個
データシートを見る →ADUM3190BRWZ-RL7
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ADUM3190ARWZ-RL7 最大定格＆電気的特性
| Isolation Voltage | 2.5 kV rms |
| 基準電圧 | 1.225 V |
| Supply Voltage Range (VDD1) | 3 V to 20 V |
| Supply Voltage Range (VDD2) | 3 V to 20 V |
| Bandwidth | 400 kHz |
| Total Supply Current | <7 mA |
| パッケージ | 16-Lead SOIC-W |
| 動作温度範囲 | -40°C to +125°C |
| Compensation Network Compatibility | Type II or Type III |
| Safety Approvals | UL 1577, IEC/EN/CSA 62368-1 |
| Technology | iCoupler |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| 出力タイプ | Error Amplifier |
ADUM3190ARWZ-RL7 ピン構成
| ピン 1 | VDD1 — Primary side supply voltage |
| ピン 2 | GND1 — Primary side ground |
| ピン 3 | IN+ — Non-inverting input |
| ピン 4 | IN- — Inverting input |
| ピン 5 | COMP — Compensation node |
| ピン 6 | REF — Reference voltage output |
| ピン 7 | GND1 — Primary side ground |
| ピン 8 | VDD1 — Primary side supply voltage |
| ピン 9 | VDD2 — Secondary side supply voltage |
| ピン 10 | GND2 — Secondary side ground |
| ピン 11 | OUT — Error amplifier output |
| ピン 12 | GND2 — Secondary side ground |
| ピン 13 | NC — No connect |
| ピン 14 | NC — No connect |
| ピン 15 | NC — No connect |
| ピン 16 | NC — No connect |
主な用途
ADUM3190ARWZ-RL7 の用途: 6 件s: Isolated Switch Mode Power Supplies, Linear Power Supplies, Inverters, Uninterruptible Power Supplies (UPS), Isolated DC-DC Converters, Battery Chargers.
Isolated Switch Mode Power Supplies
The ADUM3190ARWZ-RL7 provides isolated feedback in SMPS designs, ensuring accurate output regulation across the isolation barrier. Its 400 kHz bandwidth supports fast transient response, while the 1.225 V reference enables precise voltage control. The wide supply range (3 V to 20 V) allows direct connection to various secondary-side rails. Compared to optocouplers, it offers higher reliability and no LED degradation, making it ideal for high-performance AC-DC converters.
おすすめ
Linear Power Supplies
In linear power supplies, the ADUM3190ARWZ-RL7 provides isolated error amplification for series pass transistor control. Its low power consumption (<7 mA) minimizes overhead, and the 1.225 V reference ensures stable output. The device's compatibility with Type II/III compensation allows flexible loop design. The SOIC-W package with 2.5 kV isolation meets safety requirements for industrial linear supplies, offering a compact alternative to optocoupler-based solutions.
おすすめ
Inverters
The ADUM3190ARWZ-RL7 is used in inverter systems for isolated feedback of DC bus voltage. Its 2.5 kV isolation protects low-voltage control circuitry from high-voltage transients. The 400 kHz bandwidth enables fast loop response, improving inverter stability. The device's wide supply range (3 V to 20 V) simplifies powering from auxiliary rails. Its low power consumption reduces thermal stress in compact inverter designs, making it suitable for motor drives and solar inverters.
おすすめ
Uninterruptible Power Supplies (UPS)
In UPS systems, the ADUM3190ARWZ-RL7 provides isolated feedback for battery charging and inverter stages. Its high isolation voltage (2.5 kV rms) ensures safety in high-voltage environments. The device's low power consumption (<7 mA) is critical for battery-powered operation. The 1.225 V reference and 400 kHz bandwidth enable precise regulation, improving UPS efficiency and reliability. The SOIC-W package is suitable for space-constrained UPS designs.
おすすめ
Isolated DC-DC Converters
The ADUM3190ARWZ-RL7 is ideal for isolated DC-DC converters, providing feedback from the secondary side to the primary controller. Its 400 kHz bandwidth supports high switching frequencies, while the 1.225 V reference ensures accurate output regulation. The wide supply range (3 V to 20 V) allows operation from various output voltages. The device's low power consumption and small SOIC-W package make it suitable for board-mounted converters in telecom and industrial applications.
おすすめ
Battery Chargers
In battery charger designs, the ADUM3190ARWZ-RL7 provides isolated feedback for voltage and current regulation. Its 1.225 V reference and 400 kHz bandwidth enable precise control of charging profiles. The device's low power consumption (<7 mA) is beneficial for energy-efficient chargers. The 2.5 kV isolation ensures safety between the AC input and battery side. The SOIC-W package is suitable for compact charger designs, offering a reliable alternative to optocouplers.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADUM3190ARWZ-RL7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADUM3190ARQZ-RL7 | ADUM3190WTRQZ-RL7 | ADUM3190BRQZ-RL7 |
|---|---|---|---|---|
| Package | 16-Lead SOIC-W | 16-Lead QSOP | 16-Lead QSOP | 16-Lead QSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Isolation Voltage | 2.5 kV rms | 2.5 kV rms | 2.5 kV rms | 2.5 kV rms |
| Reference Voltage | 1.225 V | 1.225 V | 1.225 V | 1.225 V |
| Supply Voltage Range | 3 V to 20 V | 3 V to 20 V | 3 V to 20 V | 3 V to 20 V |
| Bandwidth | 400 kHz | 400 kHz | 400 kHz | 400 kHz |
| Total Supply Current | <7 mA | <7 mA | <7 mA | <7 mA |
| Automotive Grade | No | No | Yes | No |
主な差別化要因
- Higher isolation voltage than many competitors （vs Optocoupler-based error amplifiers)
- Wide supply voltage range （vs ADUM3190ARQZ-RL7)
- Low power consumption （vs Optocoupler solutions)
設計ノート
For 2.5 kV isolation, ensure PCB creepage and clearance distances meet UL 1577 requirements. Maintain at least 8 mm creepage between primary and secondary sides. Use a slot in the PCB under the isolator to enhance isolation performance.
Bypass VDD1 and VDD2 with 0.1 uF ceramic capacitors placed close to the pins. For noisy environments, add a 10 uF electrolytic capacitor in parallel. Ensure the supply voltage stays within 3 V to 20 V to avoid damage.
Do not exceed the absolute maximum ratings. The reference voltage accuracy is critical for output regulation; use 1% or better resistors in the feedback network. Ensure the compensation network is properly designed for stability, as incorrect compensation can cause oscillation.
コンプライアンス情報
RoHS compliant per Analog Devices product page. AEC-Q100 not applicable for standard grade; automotive variant available.
