ADUM5413ARWZ - Quad-Channel Digital Isolator with isoPower | Analog Devices
部品番号: ADUM5413ARWZ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $10.75 | $10.75 |
| 10 | $9.68 | $96.80 |
| 100 | $8.6 | $860.00 |
| 500 | $7.53 | $3,765.00 |
| 1,000 | $6.45 | $6,450.00 |
ADUM5413ARWZ 概要
Digital isolators are components that transfer digital signals across an isolation barrier, providing galvanic isolation to protect circuits and users from high voltages, ground loops, and noise. They are essential in industrial automation, medical equipment, and power systems where safety and signal integrity are critical. The ADUM5413ARWZ integrates the isolation barrier and a DC-to-DC converter, eliminating the need for a separate isolated power supply, thus simplifying design and reducing board space.
Key features include four isolation channels (two forward, two reverse), integrated isoPower DC-to-DC converter, 2.5 kVrms isolation, 1 Mbps data rate, 25 kV/µs CMTI, and wide operating temperature range. The device operates from a single 5.0 V or 3.3 V supply and provides regulated isolated output power, making it ideal for applications requiring isolated power and signal transfer.
Technically, the ADUM5413ARWZ uses Analog Devices' iCoupler technology, which combines high-speed CMOS and monolithic transformer technology to achieve isolation. The integrated DC-to-DC converter uses a push-pull topology with an internal oscillator and transformer, providing up to 500 mW of isolated power. The device includes under-voltage lockout (UVLO) and thermal shutdown protection for reliable operation.
Typical applications include isolated SPI interfaces, industrial field buses, motor control, and isolated sensor interfaces. The integrated power supply reduces component count and simplifies PCB layout, making it suitable for space-constrained designs.
When designing with this device, ensure adequate PCB layout for the isolation barrier and proper decoupling of the input and output supplies. The isoPower converter requires careful attention to the transformer and capacitor placement to minimize noise and ensure stable operation.
ドロップイン代替品: ADUM5413ARWZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADUM5413ARWZ （同一形状・フットプリント） — 相違点: Input Supply Voltage, Package.
クイック比較ツール — 並列比較する代替部品を選択:
ADUM5403ARWZ
✅ ドロップイン✓ 在庫あり
$7.8 / 個
データシートを見る →ADUM5404ARWZ
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.49 / 個
データシートを見る →ADUM5401ARWZ
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.5 / 個
データシートを見る →ADUM5402ARWZ
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.75 / 個
データシートを見る →ADUM5413ARWZ-RL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADUM5413ARWZ 仕様
| Number of Channels | 4 |
| Isolation Voltage | 2500 Vrms |
| データレート | 1 Mbps |
| Common-Mode Transient Immunity (CMTI) | 25 kV/µs |
| Integrated DC-to-DC Converter | Yes, up to 500 mW |
| Input Supply Voltage | 5.0 V or 3.3 V |
| Output Supply Voltage | 5.0 V or 3.3 V (isolated) |
| パッケージ | 16-SOIC (0.295", 7.50mm Width) |
| 動作温度範囲 | -40°C to +105°C |
| RoHS ステータス | Compliant |
| 実装タイプ | Surface Mount |
| ピン数 | 16 |
ADUM5413ARWZ ピン構成
| ピン 1 | VDD1 — Input supply voltage (5.0 V or 3.3 V) |
| ピン 2 | GND1 — Input ground |
| ピン 3 | VIA — Input channel A |
| ピン 4 | VIB — Input channel B |
| ピン 5 | VIC — Input channel C |
| ピン 6 | VID — Input channel D |
| ピン 7 | GND1 — Input ground |
| ピン 8 | NC — No connect |
| ピン 9 | VOD — Output channel D |
| ピン 10 | VOC — Output channel C |
| ピン 11 | VOB — Output channel B |
| ピン 12 | VOA — Output channel A |
| ピン 13 | GND2 — Output ground |
| ピン 14 | VDD2 — Isolated output supply voltage |
| ピン 15 | GND2 — Output ground |
| ピン 16 | NC — No connect |
主な用途
ADUM5413ARWZ の用途: 6 件s: Isolated SPI Interface, Industrial Field Bus Isolation, Motor Control, Isolated Sensor Interface, Medical Equipment Isolation, Power Supply Feedback Isolation.
Isolated SPI Interface
The ADUM5413ARWZ provides isolated power and data for SPI buses, enabling safe communication between microcontrollers and peripheral devices across an isolation barrier. Its two forward and two reverse channels accommodate MOSI, MISO, SCK, and CS signals, while the integrated isoPower converter supplies isolated power to the peripheral side. With 1 Mbps data rate and 2.5 kVrms isolation, it ensures reliable data transfer in industrial and medical systems. The integrated power supply eliminates the need for a separate isolated DC-DC converter, simplifying design and reducing board space.
おすすめ
Industrial Field Bus Isolation
In industrial field buses like RS-485 or CAN, the ADUM5413ARWZ isolates the controller from the transceiver, protecting against ground loops and voltage transients. Its 25 kV/µs CMTI ensures reliable operation in noisy environments, and the integrated isoPower provides isolated power to the bus side. The 1 Mbps data rate supports standard field bus speeds, and the 2.5 kVrms isolation meets industrial safety requirements. This reduces component count and simplifies PCB layout, making it ideal for space-constrained industrial modules.
おすすめ
Motor Control
The ADUM5413ARWZ isolates gate driver signals and feedback in motor control systems, protecting low-voltage control circuitry from high-voltage power stages. Its integrated isoPower converter provides isolated power for gate drivers, eliminating the need for a separate isolated supply. With 1 Mbps data rate and 2.5 kVrms isolation, it ensures reliable signal transfer in PWM control and current sensing. The 25 kV/µs CMTI enhances immunity to switching noise, making it suitable for industrial motor drives and robotics.
おすすめ
Isolated Sensor Interface
The ADUM5413ARWZ isolates sensor signals from the main controller, preventing noise and ground loops from affecting measurement accuracy. Its integrated isoPower provides isolated power to the sensor, simplifying wiring and reducing external components. The 1 Mbps data rate supports high-speed sensors, and the 2.5 kVrms isolation ensures safety in medical and industrial environments. The two forward and two reverse channels are ideal for bidirectional sensor communication, such as I2C or SPI.
おすすめ
Medical Equipment Isolation
In medical devices, the ADUM5413ARWZ provides galvanic isolation to protect patients and operators from electrical hazards. Its 2.5 kVrms isolation meets medical safety standards, and the integrated isoPower supplies isolated power to sensors and front-end circuits. The 1 Mbps data rate is sufficient for most medical monitoring signals, and the 25 kV/µs CMTI ensures reliable operation in electrically noisy environments. The compact SOIC-W package is suitable for space-constrained medical devices.
おすすめ
Power Supply Feedback Isolation
The ADUM5413ARWZ isolates feedback signals in power supplies, providing safe communication between the primary and secondary sides. Its integrated isoPower converter can power the secondary-side control circuitry, eliminating the need for a separate bias supply. The 1 Mbps data rate supports fast feedback loops, and the 2.5 kVrms isolation ensures safety in high-voltage applications. The two forward and two reverse channels are useful for bidirectional communication in digital power control.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADUM5413ARWZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADUM5403ARWZ | ADUM5404ARWZ | ADUM5401ARWZ |
|---|---|---|---|---|
| Package | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 4 | 4 | 4 | 4 |
| Channel Configuration | 2 forward, 2 reverse | 3 forward, 1 reverse | 4 forward | 2 forward, 2 reverse |
| Isolation Voltage | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms |
| Data Rate | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps |
| CMTI | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs |
| Integrated DC-DC Converter | Yes, up to 500 mW | Yes, up to 500 mW | Yes, up to 500 mW | Yes, up to 500 mW |
主な差別化要因
- Integrated isoPower DC-to-DC converter （vs ADUM5403ARWZ)
- 2 forward/2 reverse channel configuration （vs ADUM5404ARWZ)
- Same package and pinout as ADUM5401ARWZ （vs ADUM5401ARWZ)
設計ノート
For optimal performance, place decoupling capacitors (0.1 µF and 10 µF) close to the VDD1 and VDD2 pins. The isoPower converter requires careful PCB layout to minimize noise; keep the transformer and output capacitors on the secondary side close to the IC. Use a solid ground plane under the device to reduce EMI.
The ADUM5413ARWZ can dissipate up to [DATA_NEEDED: power dissipation] W. Ensure adequate copper area on the PCB for heat sinking, especially when operating at high ambient temperatures. The SOIC-W package has a thermal resistance of [DATA_NEEDED: theta_JA] °C/W; verify junction temperature stays within limits.
Do not exceed the absolute maximum ratings for input voltage and isolation voltage. Ensure the input supply is stable and within the specified range (5.0 V or 3.3 V). The isoPower converter output is regulated, but avoid loading it beyond 500 mW. Also, verify the channel configuration matches your application to avoid signal routing errors.
コンプライアンス情報
RoHS compliant per distributor data. Other compliance details not specified in provided data.