ADV7160KS140 - 220MHz True-Color Video RAM-DAC | Analog Devices
部品番号: ADV7160KS140 ✗ 生産終了ADV7160KS140 概要
A video RAM-DAC is a graphics-interface semiconductor that converts digital pixel and palette information into analog red, green, and blue video signals. In the broader hierarchy, it belongs to the video interface IC and display-processing categories, bridging a digital graphics subsystem and analog RGB display hardware. The ADV7160KS140 is intended for high-performance color graphics systems where direct digital rendering must be converted into analog video outputs.
The principal features include three 10-bit DAC channels, a 96-bit pixel port, 220 MHz operation, a user-definable hardware cursor, and a triple-by-30 color palette RAM. Its 30-bit gamma-corrected capability provides additional headroom for display color processing, while the specified DAC-to-DAC color matching limit of 2% maximum supports consistent output among the red, green, and blue channels.
The device includes an on-chip phase-locked loop for pixel-clock-related implementation and a 64-by-64 hardware cursor. These resources reduce the external circuitry and software overhead normally required by a discrete graphics-output design. The 160-lead MQFP package provides numerous pixel-port, synchronization, analog-output, control, and supply connections needed for a parallel graphics subsystem.
Typical applications include graphics subsystems in color workstations, windows accelerators, industrial display controllers, professional video equipment, and legacy digital-display systems. The parallel 96-bit pixel port is particularly suitable where high aggregate pixel bandwidth is required and the source controller can drive the interface at the supported clock rate.
When laying out a new design, verify every signal against the ADV7160/ADV7162 datasheet pin-description table and preserve the analog-output routing and grounding recommendations. Confirm the selected ADV7160 speed grade, supply sequencing, clock jitter tolerance, and output-load assumptions before releasing PCB artwork or treating another family member as a replacement.
This product record combines the manufacturer's architecture description with package, interface, DAC, cursor, and application details, while adding practical design guidance, sourcing information, and a structured same-family replacement comparison for faster engineering evaluation.
ドロップイン代替品: ADV7160KS140 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADV7160KS140 (同一形状・フットプリント) — 相違点: Package, Product Type, Integrated PLL, Color Palette RAM, True-Color Output.
ADV7160KS170
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADV7160KS220
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADV7160KS120
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
ADV7160KS100
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
ADV7162KS140
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ADV7160KS140 最大定格&電気的特性
| Product Type | 96-bit true-color video RAM-DAC |
| Pixel Port Width | 96 bit |
| 最大クロック周波数 | 220 MHz |
| DAC Channel Count | 3 channels |
| DAC Resolution | 10 bit per channel |
| True-Color Output | 24 bit |
| Gamma-Corrected Output | 30 bit |
| DAC-to-DAC Color Matching | 2% maximum |
| Color Palette RAM | 3 x 30 entries |
| Hardware Cursor | 64 x 64 pixels |
| Integrated PLL | 1 integrated PLL |
| 電源電圧 | 5 V |
| パッケージ | 160-lead MQFP |
| Lead Pitch | 0.65 mm |
| 実装タイプ | Surface mount |
| ピン数 | 160 pins |
| Control Interface | Serial control interface |
ADV7160KS140 160-lead mqfp ピン配置ガイド
ADV7160KS140 (160-lead mqfp パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: ADV7160KS140.
詳細は データシート をご参照ください。
主な用途
ADV7160KS140 の用途: 6 件s: Color Graphics Workstation, Windows Accelerator Card, Industrial Display Controller, Professional Video Equipment, Digital Video Matrix, Legacy Graphics-System Maintenance.
Color Graphics Workstation
The ADV7160KS140 fits a color workstation graphics subsystem that renders pixels digitally and requires three analog video outputs. Its 96-bit pixel port supplies a broad parallel data path, while the 220 MHz maximum clock capability supports demanding display timing. The triple 10-bit DACs provide 24-bit true-color operation, and the specified DAC-to-DAC matching of 2% maximum helps maintain consistent red, green, and blue output. The integrated PLL and color palette RAM also reduce the peripheral circuitry required around the graphics controller.
おすすめ
Windows Accelerator Card
ADV7160KS140 is appropriate for a parallel windows-accelerator card that must translate rendered pixel and palette data into analog display signals. The 96-bit pixel port can accommodate the aggregate data movement of a high-throughput graphics pipeline, and the 220 MHz clock capability provides a substantial timing ceiling for supported display modes. Its three 10-bit DACs and integrated color palette RAM support true-color graphics without separate triple-DAC implementation, while the 160-lead MQFP provides the necessary control, clock, pixel, and analog connections.
おすすめ
Industrial Display Controller
The ADV7160KS140 can serve an industrial display controller requiring a wide parallel pixel bus and precision RGB DAC outputs. Its 96-bit input structure supports graphics data transfer, the 220 MHz maximum frequency addresses high-resolution timing, and the three 10-bit DAC channels provide consistent color generation with 2% maximum DAC-to-DAC matching. Before production use, the controller should validate synchronization, clock jitter, output loading, environmental temperature, and any isolation requirements of the target installation.
おすすめ
Professional Video Equipment
ADV7160KS140 suits professional graphics and video equipment that needs a dedicated true-color RAM-DAC rather than a general-purpose display interface. The device combines a 96-bit pixel port with 30-bit gamma-corrected capability and triple 10-bit DACs, enabling flexible color lookup and analog output. Its 64 x 64 user-definable hardware cursor can simplify overlay functions in specialized equipment. Designers should confirm expected pixel formats, sync standards, DAC settling requirements, and analog output topology against the target system timing.
おすすめ
Digital Video Matrix
The ADV7160KS140 can be evaluated for a digital video matrix in which parallel graphics data must become multiple-format analog display outputs. Its high-width pixel port and 220 MHz device capability support demanding source data rates, while the integrated palette RAM and hardware cursor reduce controller overhead. The implementation should account for output settling time, synchronization polarity, pixel clock phase, and the 2% maximum DAC-to-DAC color-matching requirement when defining display calibration limits.
おすすめ
Legacy Graphics-System Maintenance
ADV7160KS140 is particularly relevant when maintaining an existing workstation or accelerator that uses the ADV7160 160-lead MQFP architecture. The same-family ADV7160KS170 and ADV7160KS220 options offer potential board-compatible upgrade paths with higher clock classes. A replacement should be accepted only after comparing its ordering code, pin descriptions, supply arrangement, timing tables, and DAC characteristics. This approach can preserve a proven PCB while avoiding unnecessary high-risk board redesign.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADV7160KS140 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADV7160KS170 | ADV7160KS220 | ADV7160KS120 | ADV7160KS100 | ADV7162KS140 |
|---|---|---|---|---|---|---|
| Package | 160-lead MQFP | 160-lead MQFP | 160-lead MQFP | 160-lead MQFP | 160-lead MQFP | 160-lead MQFP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Device Type | 96-bit true-color video RAM-DAC | 96-bit true-color video RAM-DAC | 96-bit true-color video RAM-DAC | 96-bit true-color video RAM-DAC | 96-bit true-color video RAM-DAC | 96-bit true-color video RAM-DAC |
| Pixel Port Width | 96 bit | 96 bit | 96 bit | 96 bit | 96 bit | 96 bit |
| DAC Resolution | 3 x 10 bit | 3 x 10 bit | 3 x 10 bit | 3 x 10 bit | 3 x 10 bit | 3 x 10 bit |
| Hardware Cursor | 64 x 64 pixels | 64 x 64 pixels | 64 x 64 pixels | 64 x 64 pixels | 64 x 64 pixels | 64 x 64 pixels |
| Integrated PLL | Yes | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- Higher same-family operating point (vs ADV7160KS170)
- Widest clock-class headroom among the listed ADV7160 alternatives (vs ADV7160KS220)
- Integrated graphics resources (vs ADV7160KS100)
設計ノート
Route the 96-bit pixel bus as a short, controlled-length interface on a multilayer PCB, with attention to clock-to-data timing relative to the selected KS140 operating point. Keep switching current away from the analog DAC and PLL areas. Follow the pin-description table and layout guidance in the ADV7160/ADV7162 datasheet before assigning nets, especially because the 160-lead MQFP includes power, ground, clock, synchronization, control, pixel-data, and analog-output pins.
Distribute the 5 V supply and ground connections through multiple pins as directed by the package data and application schematic. Place local high-frequency bypass capacitors close to the intended supply and ground pins, and keep their return paths compact. Verify the supply tolerance, startup behavior, and permitted sequencing conditions in the datasheet rather than assuming that a generic 5 V rail meets every analog-output requirement.
Do not treat the ADV7160KS170, ADV7160KS220, ADV7160KS120, ADV7160KS100, or ADV7162KS140 naming similarity as proof of automatic interchangeability. Compare the exact ordering table, active clock grade, pin descriptions, DAC characteristics, and operating-temperature information. Also confirm that the existing PCB exposes the required supplies and signals and that no production program depends on grade-specific timing behavior.
Preserve clean pixel-clock routing and provide a controlled clock source to the PLL and synchronization inputs. Account for propagation delay, jitter, skew across the parallel pixel bus, and output settling time in the system timing budget. If substituting a faster same-family grade, re-run timing and signal-integrity analysis because extra clock capability does not automatically correct an already marginal routing design.
コンプライアンス情報
The device is a legacy graphics video RAM-DAC, and no RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the available product information. Automotive qualification does not apply to this product.