ADV7280AWBCPZ-M 10-Bit SDTV Video Decoder | Analog Devices
部品番号: ADV7280AWBCPZ-M ✓ 生産中ADV7280AWBCPZ-M 概要
A video decoder is an interface IC that translates legacy analog video signals into a digital pixel format that can be processed by an FPGA, ASIC, display controller, or image pipeline. In the wider electronics hierarchy, the ADV7280AWBCPZ-M belongs to the video interface IC family and ultimately sits within interface and signal-processing semiconductors. This conversion stage is useful when an existing analog video source must coexist with a modern digital display or embedded imaging system.
The decoder provides 10-bit processing, 4x oversampled SDTV video decoding, and deinterlacing in one compact package. Its multiformat input capability allows the system to identify supported analog video sources automatically, while YCrCb 4:2:2 output supports digital video pipelines without requiring an RGB conversion at the analog input stage. The I2C-compatible control path simplifies configuration from a host processor or programmable logic device. The 32-LFCSP 5 x 5 mm package also supports compact, surface-mount board layouts, although its exposed thermal pad requires careful PCB layout and thermal management.
The ADV7280-M family is intended for embedded analog-video processing in industrial, consumer, surveillance, and broadcast-related equipment. Typical signal-chain roles include decoding composite video, generating YCrCb pixel data for an FPGA scaler, and feeding a display pipeline. Because decoding and deinterlacing are combined, the device reduces the number of separate processing blocks required for interlaced standard-definition sources. Designers should still account for analog input conditioning, clocking, output timing, unused-pin treatment, and the package thermal pad when creating a production layout.
A key design consideration is that the analog video input and digital output paths must be laid out as controlled-impedance and noise-sensitive structures. Keep analog traces short, provide the required bypass capacitance at the supply pins, connect the exposed pad to the recommended ground-plane thermal via pattern, and follow the manufacturer pin-description table for every signal and unused input. Use the manufacturer datasheet for the authoritative pinout, register definitions, timing diagrams, electrical limits, and application circuit because the complete pin list is not included on this page.
This product page consolidates the manufacturer description, package information, programming method, lifecycle context, drop-in alternatives, application guidance, and engineering design notes into a single decision resource. It is intended to support component identification, PCB planning, firmware preparation, and replacement assessment rather than replace the full manufacturer datasheet.
ドロップイン代替品: ADV7280AWBCPZ-M — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADV7280AWBCPZ-M (同一形状・フットプリント) — 相違点: Oversampling, Process Technology, Product Type.
ADV7280AWBCPZ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADV7280A-M
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADV7282AWBCPZ-M
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADV7280AWBCPZ-M 仕様
| Product Type | 10-bit multiformat SDTV video decoder with deinterlacer |
| 分解能 | 10-bit |
| Oversampling | 4x |
| Supported Video Input | Standard analog baseband video |
| Digital Video Output Format | YCrCb 4:2:2 |
| Control Interface | 2-wire serial bidirectional interface, I2C compatible |
| Process Technology | 1.8 V CMOS |
| I2P Conversion Support | Supported by ADV7280 and ADV7280-M |
| パッケージ | 32-lead LFCSP, 5 mm x 5 mm |
| 実装タイプ | Surface mount |
| Automotive Qualification | ADV7280-M family variant |
ADV7280AWBCPZ-M 32-lead lfcsp, 5 mm x 5 mm ピン配置ガイド
ADV7280AWBCPZ-M (32-lead lfcsp, 5 mm x 5 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADV7280AWBCPZ-M.
詳細は データシート をご参照ください。
主な用途
ADV7280AWBCPZ-M の用途: 6 件s: Legacy Analog Video to FPGA Conversion, Industrial Video Inspection, Analog Surveillance Camera Interface, Video Wall and Display Controller Interface, Broadcast and Professional Video Monitoring, Embedded Video Test and Measurement.
Legacy Analog Video to FPGA Conversion
The ADV7280AWBCPZ-M fits an FPGA video bridge when an installed analog baseband source must become a modern digital pixel stream. Its 10-bit decoding and 4x oversampling provide the input conversion stage, while the integrated deinterlacer prepares interlaced SDTV content for downstream pixel processing. The decoder outputs YCrCb 4:2:2 data rather than an analog signal, allowing the FPGA to handle scaling, color processing, overlay, or memory write operations. Configuration is performed through the I2C-compatible 2-wire interface, but designers must verify acquisition timing, clock relationships, interrupt behavior, and register defaults against the manufacturer datasheet before committing the fabric interface.
おすすめ
Industrial Video Inspection
The ADV7280AWBCPZ-M can serve as the analog-video ingress device in an industrial inspection system that combines legacy cameras with digital image processing. The multiformat decoder is intended to detect supported standard baseband video inputs, while the 10-bit, 4x oversampled architecture and integrated deinterlacer support reliable conversion into YCrCb 4:2:2 data. That output can feed an FPGA or processor responsible for defect detection, frame capture, or image analytics. For factory use, the complete temperature range, analog noise performance, synchronization behavior, and electromagnetic requirements must be checked against the system specification before release to production.
おすすめ
Analog Surveillance Camera Interface
The ADV7280AWBCPZ-M is appropriate for a surveillance system that must accept an analog camera output while retaining a digital processing path. Its automatic multiformat detection simplifies adaptation to supported composite or component sources, and the integrated deinterlacer removes the need for a separate frame-field conversion stage in many designs. YCrCb 4:2:2 output can be timestamped and encoded by a downstream FPGA, image processor, or storage controller. Because surveillance installations can involve long cables and noisy environments, engineers should prioritize verified clocking margins, input protection, grounding, isolation strategy, and the manufacturer-defined analog layout rather than treating video inputs as ordinary digital signals.
おすすめ
Video Wall and Display Controller Interface
The ADV7280AWBCPZ-M can bridge a legacy analog video source into a digital video-wall controller. The decoder converts the selected standard-definition analog baseband input into YCrCb 4:2:2 data for a scaler, FPGA, or display-timing controller, while 4x oversampling and integrated deinterlacing support consistent processing of interlaced material. This is particularly useful when installed equipment still produces composite video but the display architecture requires digital pixels. The design should account for cable and connector losses, chroma quality, source-identification behavior, and output timing. Use the ADV7280AWBCPZ-M datasheet to select the correct register settings and ensure the host controller can accommodate the decoder's clock and synchronization outputs.
おすすめ
Broadcast and Professional Video Monitoring
The ADV7280AWBCPZ-M supports professional monitoring equipment that must ingest standard analog baseband video and present it to digital processing hardware. Its multiformat detection, 10-bit decoding path, 4x oversampling, and integrated deinterlacer make it well suited to the first stage of a monitoring pipeline where YCrCb 4:2:2 data can be analyzed, converted, or recorded. The compact 32-lead LFCSP saves board area in multi-channel equipment, although each decoded source still needs careful routing and its own recommended bypass network. Validate color rendition, synchronization reliability, input dynamic range, and channel-to-channel timing using representative source equipment before production.
おすすめ
Embedded Video Test and Measurement
The ADV7280AWBCPZ-M can be used in embedded test equipment that measures or transforms analog video characteristics. Its multiformat input support enables automatic acquisition of supported standard-definition sources, and the YCrCb 4:2:2 output provides a structured digital representation for analysis by programmable logic or a processor. The integrated deinterlacer and 4x oversampling can simplify test-chain implementation, while the 10-bit processing path preserves more quantization levels than an 8-bit interface. Instrument designers must still account for analog input bandwidth, noise, timing accuracy, reference-clock quality, and calibration. Use the manufacturer's register and electrical tables to establish deterministic startup and measurement limits.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADV7280AWBCPZ-M — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADV7280AWBCPZ | ADV7280A-M | ADV7282AWBCPZ-M |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 32-lead LFCSP (5 mm x 5 mm) | 32-lead LFCSP (5 mm x 5 mm) | 32-lead LFCSP (5 mm x 5 mm) | 32-lead LFCSP (5 mm x 5 mm) |
| Automotive -M Family | Yes | No | Yes | Yes |
主な差別化要因
- Combines 10-bit decoding, 4x oversampling, and deinterlacing in one interface IC (vs ADV7282AWBCPZ-M)
- Direct non-M family option supports assembly qualification (vs ADV7280AWBCPZ)
- MIPI-family option provides documented pin and software compatibility (vs ADV7280A-M)
設計ノート
Treat the analog video inputs as high-impedance, noise-sensitive nodes. Route them away from switching supplies, clocks, and digital output activity; keep the paths short; and follow the manufacturer reference layout for input components and return connections. The 32-lead LFCSP exposed pad must use the prescribed copper and via arrangement for both electrical grounding and heat spreading. Verify every net against the manufacturer pin-description table, especially unused analog inputs, before releasing the PCB.
Place all required bypass capacitors close to their associated supply and ground pins, and keep the loops between each capacitor and the package as small as practical. Use the voltage, capacitance, and ESR values specified by the manufacturer rather than generic bulk-capacitor substitutions. Because the decoder is fabricated in a 1.8 V CMOS process, confirm rail sequencing and allowable supply limits in the power design, especially when the analog input source and downstream FPGA use different supply domains.
Clock and synchronization signals must meet the decoder's timing limits with margin at the intended video raster rate. Establish the source, pixel clock, horizontal synchronization, and vertical synchronization relationships during schematic design, and include test points for debugging. Avoid long stubs or uncontrolled fanout on sensitive lines. For cable-connected analog sources, include the source impedance, termination or amplifier arrangement, and protection specified by the application circuit rather than adding arbitrary series capacitance.
Do not assume that similar ADV72xx order codes are register-compatible. The ADV7280A-M has documented pin and software compatibility with ADV7280-M but adds a MIPI variant, while ADV7282 belongs to a related decoder family. Compare the exact input formats, digital outputs, clock requirements, register map, exposed-pad connection, and timing specifications. An existing PCB footprint match alone is not sufficient to establish functional drop-in compatibility.
コンプライアンス情報
The ADV7280-M is the automotive-oriented family option. Detailed RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the manufacturer's current product documentation.