AK5483 - 10-Bit 20 MSPS 3-Channel ADC | AKM Semiconductor
部品番号: AK5483 ✓ 生産中AK5483 概要
An ADC is an analog-to-digital converter, a semiconductor that samples continuous voltage signals and produces corresponding digital codes for processing, storage, transmission, or control. Within the broader hierarchy of data-converter ICs, the AK5483 is a flash-sampling ADC suitable for multichannel systems requiring compact conversion and modest digital resolution. Its 10-bit output and 20 MSPS maximum rate make it relevant to video, imaging, instrumentation, communications, and embedded signal-processing systems.
The primary verified features include a 10-bit conversion resolution, a maximum sampling rate of 20 MSPS, three integrated ADC channels, single-ended analog inputs, and a 1 Vpp input range. The parallel straight-binary output simplifies connection to digital logic when the host device can accept the converter's data interface directly. Integrating three channels also reduces the need for separate converter packages when synchronized or closely timed measurements are required.
The AK5483 uses a full-pipeline ADC architecture. This architecture separates conversion into internal stages, supporting higher operating speed than a basic single-stage flash approach while retaining a 10-bit straight-binary result. The manufacturer documentation also identifies the device as a CMOS converter, which is important when evaluating digital interface timing, power behavior, and integration with mixed-signal systems.
Typical engineering uses include multichannel video digitization, sensor signal capture, communications receivers, industrial measurement systems, and embedded control platforms. The three-channel architecture is particularly useful when several analog signals must be converted within the same system, while the 20 MSPS maximum rate supports streaming workloads that exceed low-speed sensor-sampling requirements. The exact sampling rate, timing, and input bandwidth available in a finished design should be checked against the operating conditions in the manufacturer datasheet.
Designers should treat the analog input range, reference requirements, clocking, digital output timing, supply sequencing, and package footprint as the principal integration constraints. Input conditioning must present a compliant 1 Vpp signal to each channel, and PCB layout should minimize noise coupling around the analog inputs and high-speed digital outputs. The AK5483 datasheet should be consulted for pin assignments, recommended application circuits, timing margins, and electrical limits.
This page consolidates verified manufacturer-linked specifications, distributor availability references, packaging information, application guidance, and replacement limitations for engineers evaluating the AK5483. It also separates confirmed facts from parameters that require datasheet confirmation rather than estimating missing values.
ドロップイン代替品: AK5483 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストAK5483 最大定格＆電気的特性
| Converter Type | Analog-to-digital converter |
| 分解能 | 10 bit |
| Maximum Sampling Rate | 20 MSPS |
| Number of Channels | 3 channels |
| Analog Input Type | Single-ended |
| Analog Input Range | 1 Vpp |
| Output Format | Straight binary |
| Architecture | Full-pipeline ADC |
| Process Technology | CMOS |
| パッケージ | LFQFP |
| Manufacturer | Asahi Kasei Microdevices/AKM |
| Datasheet Description | 10-bit 20 MHz 3-channel ADC |
| Input Signal | Single-ended analog voltage |
| Digital Output | Straight-binary digital data |
AK5483 lfqfp ピン配置ガイド
AK5483 (lfqfp パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AK5483.
詳細は データシート をご参照ください。
主な用途
AK5483 の用途: 6 件s: Multichannel Video Digitization, Sensor Signal Acquisition, Communications Receiver Front End, Industrial Measurement, Embedded Test and Measurement, Image and Optical Signal Processing.
Multichannel Video Digitization
The AK5483 fits multichannel video digitization when three analog signals must be converted into a common digital stream. Its verified 10-bit resolution and 20 MSPS maximum sampling rate provide enough conversion bandwidth for moderate-speed signal capture, while the three integrated channels can reduce the number of separate converter packages. Each channel accepts a single-ended 1 Vpp input and produces straight-binary data. The system designer must still verify channel timing, output interface details, clocking, and video-specific timing against the complete datasheet.
おすすめ
Sensor Signal Acquisition
The AK5483 is suitable for acquisition systems carrying three sensor-derived analog signals into digital processing. The single-ended 1 Vpp input range makes analog front-end conditioning a central design task, while 10-bit quantization supports general measurement and control rather than ultra-high-precision instrumentation. At up to 20 MSPS, the ADC can capture faster events than a low-rate control ADC, subject to the verified operating conditions. Use the three-channel structure to simplify wiring and ensure all channels share the same converter package.
おすすめ
Communications Receiver Front End
The AK5483 can be evaluated for communications receiver front ends that require conversion of several received or processed analog signals. Its 20 MSPS maximum sampling rate is suitable for higher-bandwidth intermediate signals, and the 10-bit straight-binary output can feed digital logic or a downstream processor. The analog input must be conditioned to the verified single-ended 1 Vpp range, and the design must account for filtering, gain, clock jitter, and digital-output timing. Receiver requirements should be benchmarked against the complete electrical and dynamic specifications.
おすすめ
Industrial Measurement
The AK5483 can support multichannel industrial measurement boards where several conditioned analog inputs are converted for monitoring or control. Its three-channel integration limits package count compared with using separate converters, while 20 MSPS maximum sampling permits faster acquisition than basic low-speed ADC options. The 10-bit resolution should be matched to the actual signal-to-noise requirement, and the analog input range must be maintained at 1 Vpp. Calibration, grounding, isolation, and noise performance are critical in factory environments.
おすすめ
Embedded Test and Measurement
The AK5483 is applicable to embedded test and measurement products that digitize three analog channels for analysis, waveform display, or automated calibration. Its 10-bit resolution and 20 MSPS maximum sampling rate allow moderate-resolution acquisition of dynamic signals, while the compact multichannel package helps limit board area. The system should use the converter's straight-binary output with an appropriate capture controller and should verify output timing and clock requirements. The LFQFP footprint also requires careful thermal and soldering design in compact instruments.
おすすめ
Image and Optical Signal Processing
The AK5483 may be evaluated in image or optical signal-processing paths that require several analog channels at a moderate conversion rate. The three-channel ADC can capture related sensor outputs, while 10-bit data provides a compact digital representation for downstream filtering or feature extraction. The 1 Vpp input range requires front-end amplification and biasing, and 20 MSPS should be evaluated against the actual frame or line rate. Optical systems also need careful grounding and isolation to prevent converter noise from degrading the sensor signal.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AK5483 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | No verified alternative |
|---|---|---|
| Package | LFQFP | No verified same-package drop-in candidate supplied |
| Brand | AKM Semiconductor | No verified alternative brand supplied |
主な差別化要因
- Three integrated ADC channels （vs No verified alternative supplied)
- 20 MSPS maximum sampling rate （vs No verified alternative supplied)
- Single-ended 1 Vpp input interface （vs No verified alternative supplied)
設計ノート
Keep each 1 Vpp analog input path short, controlled, and referenced to a clean analog ground. Place input conditioning components close to the AK5483 and avoid routing sensitive analog signals beneath high-speed digital outputs. The supplied data does not specify input bandwidth, settling time, crosstalk, or recommended source impedance, so use the complete manufacturer application circuit and timing requirements before setting gain or filter bandwidth.
The AK5483 is identified as an LFQFP device, but the supplied snippets do not include the pin count, pitch, or land pattern. Do not create a footprint from a generic LFQFP library. Download the manufacturer datasheet, verify every analog, digital, power, ground, reference, and clock connection, and use the package drawing for solder mask, paste, fanout, and assembly clearances.
A replacement selected only because it is also a 10-bit ADC may fail because AK5483 requires a three-channel, 20 MSPS maximum, single-ended 1 Vpp interface in an LFQFP package. Verify channel mapping, output coding, clock polarity, digital timing, supply rails, reference requirements, and acquisition behavior. The supplied cross-reference results contain no verified substitute MPN, so no drop-in part is claimed here.
コンプライアンス情報
Compliance data was not present in the supplied verified web snippets or internal database data. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-mineral declarations with the manufacturer or authorized distributor documentation.
