ATMEGA16A-AU - 16KB Flash AVR MCU 16MHz TQFP-44 | Microchip
部品番号: ATMEGA16A-AU ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.2 | $3.20 |
| 10 | $2.88 | $28.80 |
| 100 | $2.55 | $255.00 |
| 500 | $2.3 | $1,150.00 |
| 1,000 | $2.05 | $2,050.00 |
ATMEGA16A-AU 概要
A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters. Within the semiconductor hierarchy, the ATmega16A belongs to the AVR family of enhanced RISC microcontrollers, a product category under Microchip's 8-bit MCU portfolio used for embedded control in industrial, consumer, and automotive-adjacent systems.
Key features include 133 powerful instructions with mostly single-cycle execution, delivering throughput approaching 1 MIPS per MHz. The device integrates an 8-channel 10-bit ADC, a JTAG interface for on-chip debugging and boundary scan, and self-programming Flash that supports field firmware updates. Three flexible timers (two 8-bit and one 16-bit with PWM outputs), a full-duplex USART, SPI, and TWI (I2C-compatible) interfaces round out the peripheral set.
Architecturally, the AVR core uses a Harvard structure with separate program and data buses, allowing an instruction to be fetched while the previous one executes. This single-cycle instruction fetch/execute pipeline is the reason the family achieves near 1 MIPS/MHz efficiency without pipelining complexity. The ATmega16A is a process-shrunk refresh of the original ATmega16; per Microchip application note AVR522, it is a functionally identical, drop-in replacement for the ATmega16, though some electrical characteristics differ slightly due to the new manufacturing process.
Typical applications include industrial automation and motor control, consumer appliances, battery-powered instrumentation, and embedded hobby/education platforms. The 10-bit ADC suits sensor acquisition, while JTAG debugging shortens development cycles.
Design considerations: keep the 16 MHz maximum clock in mind when budgeting processing headroom, and use the internal RC oscillator (up to 8 MHz) to save a crystal in cost-sensitive designs.
This page adds value beyond the manufacturer datasheet by synthesizing drop-in alternatives, comparison tables, design notes, and sourcing guidance in one place.
ドロップイン代替品: ATMEGA16A-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATMEGA16A-AU （同一形状・フットプリント） — 相違点: Debug Interface, SRAM, Instruction Set, Operating Temperature, Flash Program Memory.
クイック比較ツール — 並列比較する代替部品を選択:
ATMEGA16-16AU
✅ ドロップイン✓ 在庫あり
$4.41 / 個
データシートを見る →ATMEGA32A-AU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.95 / 個
データシートを見る →ATMEGA164A-AU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.65 / 個
データシートを見る →ATMEGA8535-16AU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.41 / 個
データシートを見る →ATMEGA162-16AU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.45 / 個
データシートを見る →ATMEGA16A-AU 最大定格＆電気的特性
| Core Architecture | 8-bit AVR enhanced RISC |
| Flash Program Memory | 16 KB (8K x 16), self-programmable |
| SRAM | 1024 bytes |
| EEPROM | 512 bytes |
| 最大クロック周波数 | 16 MHz |
| Performance | Approx. 1 MIPS per MHz |
| Instruction Set | 133 instructions, most single-cycle |
| 電源電圧 | 2.7 V to 5.5 V |
| ADC | 8-channel, 10-bit |
| Timers | Two 8-bit + one 16-bit with PWM |
| Communication Interfaces | USART, SPI, TWI (I2C-compatible) |
| Debug Interface | JTAG (on-chip debug and boundary scan) |
| Programmable I/O | 32 programmable I/O lines |
| パッケージ | 44-TQFP (10 x 10 mm, 1 mm height) |
| 実装タイプ | Surface Mount |
| In-System Programming | Yes (ISP via SPI) |
| Life Cycle Stage | ACTIVE |
| RoHS ステータス | Compliant |
ATMEGA16A-AU 44-tqfp (10 x 10 mm, 1 mm height) ピン配置ガイド
ATMEGA16A-AU (44-tqfp (10 x 10 mm, 1 mm height) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATMEGA16A-AU.
詳細は データシート をご参照ください。
主な用途
ATMEGA16A-AU の用途: 6 件s: Industrial Automation and Control, Sensor Acquisition and Instrumentation, Consumer Appliances, Education and Embedded Prototyping, Networking and Communication Nodes, Security and Surveillance Peripherals.
Industrial Automation and Control
The ATMEGA16A-AU fits factory-floor control nodes where a rugged 5V-tolerant 8-bit MCU is preferred over 3.3V 32-bit parts. Its 2.7V-5.5V supply range tolerates noisy industrial rails, the four PWM channels (OC0, OC1A, OC1B, OC2) drive actuators and motor drivers directly, and the 8-channel 10-bit ADC samples potentiometers, current shunts, and temperature sensors. JTAG on-chip debugging shortens commissioning of control logic, while the TWI and SPI buses link the MCU to IO expanders and EEPROMs. In a typical relay-control node the part runs at 8-16 MHz, giving roughly 8-16 MIPS of headroom for PID loops at kHz rates. Its wide availability and active lifecycle status also support long-term industrial service commitments.
おすすめ
Sensor Acquisition and Instrumentation
For bench instruments and data loggers, the ATMEGA16A-AU pairs an 8-channel 10-bit ADC with 1024 bytes of SRAM, enough for sample buffers and averaging filters at modest rates. The AVCC/AREF pin pair permits a separate quiet analog supply and precision reference, improving ADC accuracy in noisy digital environments. The USART streams measurement data to a PC or wireless module at up to 115200 baud, and the 512-byte EEPROM calibrates coefficients across power cycles without external memory. Sampling a thermistor bridge every 100 ms, the MCU spends most time in sleep mode, extending battery life. JTAG debugging lets engineers breakpoint acquisition firmware during calibration - a practical advantage over parts with debug-wire-only interfaces.
おすすめ
Consumer Appliances
Appliance control boards - coffee makers, fans, small pumps - value the ATmega16A's low BOM cost, single-chip integration, and 5V direct-drive capability that eliminates level shifting to discrete drivers. Two 8-bit timers and one 16-bit timer generate simultaneous PWM for heater power control and fan speed, while the internal 8 MHz RC oscillator removes the crystal and its two capacitors from the BOM in cost-optimized builds. The 32 I/O lines drive 7-segment displays, buttons, and relays without port expanders. The self-programming Flash enables field firmware updates over the USART for post-production feature changes. RoHS-compliant, lead-free TQFP-44 packaging meets global consumer-product environmental requirements.
おすすめ
Education and Embedded Prototyping
The ATmega16A remains a mainstay of university embedded-systems courses because its architecture is simple enough to teach register-level programming while offering real peripherals: timers, ADC, SPI, TWI, and USART. The JTAG interface supports hardware breakpoints and single-stepping with inexpensive debuggers, which AVR-based teaching platforms exploit for visualization of register state. DIP-friendly breakout boards adapt the TQFP-44 for breadboard use, and ISP programming requires only six wires from a USBasp-class programmer. Students learn Harvard RISC pipeline concepts directly, executing 133 instructions with near 1 MIPS/MHz efficiency. Community cores such as MightyCore also allow Arduino-style development when a gentler ramp-in is desired.
おすすめ
Networking and Communication Nodes
In protocol-bridge and telemetry nodes, the ATmega16A's USART handles host links up to 115200 baud while the hardware SPI bus runs card or transceiver interfaces at up to fosc/2 (8 MHz at 16 MHz). Typical designs pair the MCU with an SD card or serial radio module, using the 1024-byte SRAM for packet buffering and CRC checking in software. The TWI interface addresses RTC and sensor chips on the same two-wire bus, reducing wiring in distributed nodes. At 16 MHz the core executes about 16 MIPS, enough for software UART bit-banging of a second channel when needed. Power-down mode between transmission windows suits battery-powered gateways and metering repeaters.
おすすめ
Security and Surveillance Peripherals
Access-control panels, keypad readers, and alarm sensors use the ATmega16A's external interrupts INT0, INT1, and INT2 to wake from power-down on tamper or key events, drawing standby current only in sleep. The 8-channel ADC reads analog door sensors and battery monitors, while 32 I/O lines drive relays, LEDs, and a 4x4 keypad matrix without glue logic. The EEPROM retains access codes and event counters across outages, and the watchdog timer - standard on this family - resets hung firmware in security-critical operation. The 2.7V-5.5V supply range tolerates battery backup sags. Firmware in self-programmable Flash supports field credential updates without replacing the microcontroller.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATMEGA16A-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATMEGA16-16AU | ATMEGA32A-AU | ATMEGA164A-AU | ATMEGA8535-16AU |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology (Atmel) | Microchip Technology (Atmel) | Microchip Technology (Atmel) | Microchip Technology (Atmel) |
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Flash Memory | 16 KB | 16 KB | 32 KB | 16 KB | 8 KB |
| SRAM | 1024 B | 1024 B | 2048 B | 1024 B | 512 B |
| EEPROM | 512 B | 512 B | 1024 B | 512 B | 512 B |
| Max Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 20 MHz | 16 MHz |
| Supply Voltage | 2.7 V - 5.5 V | 2.7 V - 5.5 V | 2.7 V - 5.5 V | 1.8 V - 5.5 V | 2.7 V - 5.5 V |
| Debug Interface | JTAG | JTAG | JTAG | debugWIRE / JTAG | JTAG |
| USART Count | 1 | 1 | 1 | 2 | 1 |
主な差別化要因
- JTAG on-chip debugging with boundary scan （vs ATMEGA164A-AU)
- True drop-in for the original ATmega16 （vs ATMEGA16-16AU)
- Cost/feature balance vs larger die （vs ATMEGA32A-AU)
設計ノート
Connect AVCC (analog supply pin) to VCC through a low-pass RC network (for example 10 ohm resistor plus 100 nF capacitor) even when ADC is only occasionally used - the converter will not meet 10-bit accuracy without clean analog power. Decouple each VCC pin with 100 nF ceramic capacitors placed within 5 mm of the pins. Estimated: at 5V and 16 MHz, active current is typically in the low tens of milliamps per the datasheet DC characteristics; size your regulator accordingly and confirm exact values in the ATmega16A datasheet tables.
Keep the crystal within 10-15 mm of XTAL1/XTAL2 with short traces and ground guard, loading capacitors sized per crystal spec (commonly 22 pF for 16 MHz crystals with the CKOPT fuse programmed for full swing). Route the JTAG header (TDI, TDO, TMS, TCK on PC2-PC5, plus VCC/GND/nTRST) as a standard 2x5 footprint in production designs even if unused - rework-free debug access pays for itself. Keep ADC input traces away from PWM and crystal nets to limit capacitive crosstalk into the sample-and-hold.
Three fuse mistakes cause most field failures: (1) disabling SPIEN via ISP, which permanently locks out further SPI programming; (2) selecting an external clock source fuse combination without the corresponding hardware, bricking the device until a clock signal is injected on XTAL1; (3) leaving JTAG enabled when those port C pins are needed as GPIO - clear the JTAGEN fuse or write the JTD bit twice within four cycles in software. Also note OC2 resides on PD7 and OC0 on PB3; verify timer-to-pin mapping before routing, as it differs from ATmega8-class parts.
コンプライアンス情報
RoHS compliant per Microchip product page (green package, -AU suffix). REACH/compliance certificates available from Microchip's environmental compliance portal. Not an automotive-qualified part.
