ATMEGA16U4-AUR - 8-Bit AVR MCU 16KB Flash USB 2.0 | Microchip
部品番号: ATMEGA16U4-AUR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.2 | $4.20 |
| 10 | $3.82 | $38.20 |
| 100 | $3.44 | $344.00 |
| 500 | $3.1 | $1,550.00 |
| 1,000 | $2.9 | $2,900.00 |
ATMEGA16U4-AUR 概要
A microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and peripherals such as timers, ADCs, and communication interfaces. The ATmega16U4 belongs to the AVR ATmega USB family within the broader hierarchy of embedded microcontrollers -> 8-bit MCUs -> AVR RISC architecture, positioned for applications that need native USB connectivity without an external USB interface chip.
Key features include 16 KB of self-programmable ISP FLASH with an 8 KB boot code section, a 12-channel 10-bit ADC, high-speed PWM channels, a JTAG interface for on-chip debugging, and USB 2.0 full-speed device operation. The AVR enhanced RISC core executes most instructions in a single clock cycle, achieving throughput approaching 1 MIPS per MHz - up to 16 MIPS at 16 MHz.
Technically, the device operates from 2.7 V to 5.5 V, making it compatible with both 3.3 V and 5 V logic systems. The Harvard architecture separates program and data buses for deterministic execution, while in-system programming and boot-loader support enable field firmware updates through the USB port itself.
Typical applications include USB HID devices (keyboards, mice, game controllers), USB-to-serial bridges, custom mechanical keyboards, industrial sensors with USB reporting, and consumer electronics requiring direct USB enumeration.
A key design consideration: the USB controller requires a stable 16 MHz crystal for full-speed operation, and the 2.5 KB SRAM limits large buffering applications - move to the pin-compatible ATMEGA32U4 for 32 KB FLASH.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: ATMEGA16U4-AUR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATMEGA16U4-AUR （同一形状・フットプリント） — 相違点: Debug Interface, Instruction Set, RoHS Status, EEPROM, Package.
クイック比較ツール — 並列比較する代替部品を選択:
ATMEGA32U4-AU
✅ ドロップイン✓ 在庫あり
$4.25 / 個
データシートを見る →ATMEGA32U4-AUR
✅ ドロップイン✓ 在庫あり
$5.2 / 個
データシートを見る →ATMEGA16U4-AU
✅ ドロップイン✓ 在庫あり
$2.19 / 個
データシートを見る →ATMEGA16U4-AUR 最大定格＆電気的特性
| Core Architecture | AVR 8-bit RISC |
| Core Size | 8-bit |
| Program Memory Size | 16 KB (8K x 16) FLASH |
| Boot Code Section | 8 KB |
| SRAM | 2.5 KB |
| EEPROM | 1 KB |
| 最大クロック周波数 | 16 MHz |
| Maximum Throughput | 16 MIPS at 16 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V |
| USB Interface | USB 2.0 full-speed/low-speed device |
| ADC Resolution | 10-bit |
| ADC Channels | 12 channels |
| Debug Interface | JTAG (on-chip debug) |
| Timers / PWM | High-speed PWM |
| 動作温度 | -40C to +85C (Industrial) |
| パッケージ | 44-TQFP (10x10 mm) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Green / Compliant |
ATMEGA16U4-AUR 44-tqfp (10x10 mm) ピン配置ガイド
ATMEGA16U4-AUR (44-tqfp (10x10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATMEGA16U4-AUR.
詳細は データシート をご参照ください。
主な用途
ATMEGA16U4-AUR の用途: 6 件s: USB HID Devices (Keyboards, Mice, Gamepads), Custom Mechanical Keyboard Controllers, USB-to-Serial Bridges and Debug Adapters, Industrial Sensor Nodes with USB Reporting, Battery-Powered Portable Instruments, Maker Boards and Embedded Prototyping.
USB HID Devices (Keyboards, Mice, Gamepads)
The ATMEGA16U4-AUR is a natural fit for USB Human Interface Device designs because its integrated USB 2.0 full-speed device controller enumerates natively as an HID class device without any external interface chip, and its 16 KB FLASH is sufficient for descriptor tables plus a full keyboard or mouse matrix-scanning firmware. The AVR core's single-cycle instruction execution at 16 MHz gives 16 MIPS, easily handling debouncing and NKRO matrix scans within the 1 ms USB polling interval. Typical designs place the MCU between the switch matrix and the USB connector, powered directly from the bus at 5 V within its 2.7 V to 5.5 V range. The trade-off is the 2.5 KB SRAM, which constrains very large RGB animation buffers - those designs should migrate to the pin-compatible ATMEGA32U4.
おすすめ
Custom Mechanical Keyboard Controllers
Custom mechanical keyboard PCBs widely adopt the 44-TQFP ATmega USB family because the ATMEGA16U4-AUR combines native USB HID enumeration, in-system programmable FLASH for bootloader-based firmware flashing over USB, and enough GPIO in TQFP-44 for an 8x16 matrix plus indicators. The 1 KB EEPROM stores keymap and configuration data persistently across power cycles, and the 10-bit ADC supports analog wheel or battery-level inputs. Firmware frameworks compile comfortably inside 16 KB for layouts without heavy per-key RGB; designs adding large animations typically populate the same footprint with an ATMEGA32U4. The JTAG interface also enables factory debugging of assembled boards without socketing the chip, reducing rework cost in small-batch keyboard production.
おすすめ
USB-to-Serial Bridges and Debug Adapters
The ATMEGA16U4-AUR serves as a fully customizable USB-to-UART bridge, offering an alternative to fixed-function chips when custom VID/PID, vendor-specific protocols, or combined USB plus logic control are required. Its USART peripherals interface to external UART targets while the USB 2.0 full-speed device controller presents a CDC class port to the host, achieving transparent bidirectional transfer at standard baud rates well within the 16 MHz clock budget. Because the application and bootloader both live in 16 KB FLASH, firmware updates can ship over the same USB port. Compared with fixed bridges, this part adds programmable glue logic - GPIO, timers, and the 12-channel 10-bit ADC - letting one chip handle bridging, control signals, and analog monitoring simultaneously in test fixtures and debug probes.
おすすめ
Industrial Sensor Nodes with USB Reporting
In industrial sensing nodes, the ATMEGA16U4-AUR consolidates signal acquisition and USB reporting into one low-power 8-bit MCU. Its 12-channel 10-bit ADC samples multiple analog sensor channels such as pressure bridges, potentiometers, and current-sense outputs, while high-speed PWM drives actuators or indicator LEDs. The USB device controller lets the node appear as a vendor-defined or CDC device on factory PCs, eliminating dedicated gateway hardware. Operating from 2.7 V to 5.5 V at -40C to +85C (industrial grade), it tolerates harsh panel environments, and the 1 KB EEPROM stores calibration constants locally. The 16 KB FLASH holds a bootloader plus acquisition firmware; data-logging designs needing larger tables should use the pin-compatible ATMEGA32U4.
おすすめ
Battery-Powered Portable Instruments
Portable and battery-operated instruments benefit from the ATMEGA16U4-AUR's low-power AVR architecture, which supports sleep modes that cut current dramatically between acquisition bursts while USB remains available when docked. The 2.7 V floor allows direct operation from two alkaline cells or a single Li-Ion cell through an LDO, and the 10-bit ADC with internal reference handles battery-voltage telemetry without extra components. The 16 MIPS throughput at 16 MHz executes display update loops and filtering fast enough for handheld menus on character or small graphic LCDs. Because USB charging and data reporting use the same integrated controller, no second MCU is needed. Designers should budget the 2.5 KB SRAM carefully against display frame buffers in compact instruments.
おすすめ
Maker Boards and Embedded Prototyping
The ATMEGA16U4-AUR underpins hobbyist and prototyping boards in the AVR USB family, sharing its architecture and toolchain with the well-known Arduino Leonardo platform (ATmega32U4). Native USB means the same chip that runs the user application also programs it - a USB bootloader resides in the 8 KB boot section, so no external programmer is needed after initial provisioning. The Arduino IDE, AVR-GCC, and Microchip Studio all support the device, and JTAG enables step debugging on custom boards. Its 5 V tolerance aligns with classic AVR shields and sensor modules, while 44 pins provide ample GPIO for rapid prototyping. When sketches outgrow 16 KB, the identical-footprint ATMEGA32U4 swaps in without PCB revision, protecting board investments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATMEGA16U4-AUR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATMEGA32U4-AU | ATMEGA32U4-AUR | ATMEGA16U4-AU |
|---|---|---|---|---|
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program FLASH | 16 KB | 32 KB | 32 KB | 16 KB |
| SRAM | 2.5 KB | 2.5 KB | 2.5 KB | 2.5 KB |
| USB Controller | USB 2.0 FS/LS device | USB 2.0 FS/LS device | USB 2.0 FS/LS device | USB 2.0 FS/LS device |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Max Clock | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Packaging | Tape & Reel (R suffix) | Tray / tube | Tape & Reel | Tray / tube |
主な差別化要因
- Lowest-cost entry into the native-USB AVR TQFP-44 family （vs ATMEGA32U4-AU)
- Bootloader-friendly 8 KB boot section within 16 KB FLASH （vs ATMEGA16U4-AU)
- Single-chip USB plus analog integration （vs ATMEGA16U2-AU)
設計ノート
Decouple VCC and AVCC separately: place a 100 nF ceramic capacitor within 5 mm of each VCC pin and a 100 nF plus 10 uF pair on AVCC, connected to analog ground through a low-pass LC filter. The internal USB 3.3 V regulator requires a capacitor (typically 1 uF) on the UCAP pin per the Microchip datasheet. AVCC must not lag VCC by more than the datasheet-specified margin at power-up, or the ADC and BOD circuits may misbehave - a series resistor plus diode clamp on AVCC is a common fix.
For reliable USB 2.0 full-speed operation, route the D+ and D- traces as a matched-length pair (max length mismatch ~1 mm), keep them away from switching signals, and place 22 ohm series resistors near the MCU when cable stubs exceed a few centimeters. The 16 MHz crystal must sit within 10 mm of the XTAL pins with short ground-guarded return paths; long crystal traces invite spurious startup at cold temperatures. Use the datasheet-recommended load capacitors matched to the crystal's CL specification.
Three frequent mistakes: (1) forgetting the hardware bootloader lock-bit configuration so the 8 KB boot section is accidentally overwritten during ISP flashing; (2) clocking above 8 MHz while VCC is below the datasheet speed-grade voltage curve, causing intermittent crashes at low battery; (3) using only 16 KB FLASH for application plus USB descriptors plus bootloader - the boot section alone can occupy up to 8 KB, so budget application code against the remaining space or migrate to ATMEGA32U4. Always verify the VUSB/UCAP pin network against the latest datasheet revision.
The USB D+/D- lines and the 16 MHz crystal are the primary EMI sources in ATMEGA16U4 designs. Keep the crystal loop area minimal and place a ground stitch via next to each crystal capacitor. Route high-speed PWM traces away from analog ADC input lines to prevent clock harmonics coupling into the 10-bit converter. For CE/FCC-tested products, add common-mode choke and ESD array (e.g., USBLC6-2SC6 class parts) at the USB connector, and provide a solid, unbroken ground plane beneath the entire USB routing segment.
コンプライアンス情報
Distributor data describes the part as Green and RoHS compliant with lead-free finish. REACH, halogen-free, and conflict-minerals statements were not found in the provided data - obtain current certificates from the Microchip product page.