ATMEGA88PA-AUR - AVR 8-Bit MCU 20MHz 8KB Flash TQFP-32 | Microchip
部品番号: ATMEGA88PA-AUR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1.12 | $1.12 |
| 10 | $1.05 | $10.50 |
| 100 | $0.95 | $95.00 |
| 500 | $0.88 | $440.00 |
| 1,000 | $0.82 | $820.00 |
ATMEGA88PA-AUR 概要
A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single chip, sitting at the heart of embedded systems within the broader hierarchy of semiconductor devices (integrated circuit -> microcontroller -> 8-bit AVR family). The AVR architecture executes most of its 130 instructions in a single clock cycle through its advanced RISC pipeline and 32 general-purpose working registers, delivering up to 20 MIPS at 20 MHz.
Key features include the picoPower technology for ultra-low sleep-mode consumption, in-system self-programmable Flash with read-while-write support, a 10-bit ADC with 8 multiplexed channels, and serial peripherals including SPI, TWI (I2C-compatible), and USART. Three flexible timers/counters with compare modes and PWM outputs round out the peripheral set.
The ATMEGA88PA-AUR operates from 1.8 V to 5.5 V across the full speed range, with the A-suffix industrial temperature grade of -40C to +85C. The picoPower process reduces power in idle, power-down, and power-save modes, making it suitable for battery-powered designs.
Typical applications include consumer appliances, industrial sensing nodes, battery-powered meters, motor control, and hobby/embedded prototypes such as Arduino-compatible boards.
Designers should note the 8 KB Flash limit (4K x 16 words): choose the ATMEGA168PA or ATMEGA328P pin-compatible parts when code size is expected to grow.
This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and design notes not found in the manufacturer datasheet.
ドロップイン代替品: ATMEGA88PA-AUR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATMEGA88PA-AUR （同一形状・フットプリント） — 相違点: Package, Operating Temperature, RoHS Status, Timers/Counters, ADC.
クイック比較ツール — 並列比較する代替部品を選択:
ATMEGA88PA-ANR
✅ ドロップイン✓ 在庫あり
$0.92 / 個
データシートを見る →ATMEGA88PB-AUR
✅ ドロップイン✓ 在庫あり
$0.94 / 個
データシートを見る →ATMEGA88A-AU
✅ ドロップイン✓ 在庫あり
$1.52 / 個
データシートを見る →ATMEGA88-20AUR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ATMEGA168PA-AUR
✅ ドロップイン✓ 在庫あり
$1.85 / 個
データシートを見る →ATMEGA328P-AUR
✅ ドロップイン✓ 在庫あり
$2.18 / 個
データシートを見る →ATMEGA88PA-AUR 最大定格＆電気的特性
| Core Architecture | 8-bit AVR RISC |
| 最大クロック周波数 | 20 MHz |
| Flash Memory | 8 KB (4K x 16) |
| EEPROM | 512 B |
| SRAM | 1 KB |
| Supply Voltage Range | 1.8 V to 5.5 V |
| General Purpose I/O | 23 I/O lines |
| Working Registers | 32 |
| ADC Resolution | 10-bit |
| ADC Channels | 8 multiplexed channels |
| Timers/Counters | Two 8-bit, one 16-bit |
| Communication Interfaces | SPI, TWI (I2C), USART |
| 動作温度 | -40C to +85C |
| パッケージ | 32-TQFP (7x7 mm, 0.8 mm pitch) |
| 実装タイプ | Surface Mount |
| Packaging | Tape and Reel |
| Special Features | picoPower technology, ISP Flash with read-while-write |
ATMEGA88PA-AUR ピン構成
| ピン 1 | PD3 (PCINT19/OC2B/INT1) — Port D bit 3, pin change interrupt 19, Timer2 compare B output, external interrupt 1 |
| ピン 2 | PD4 (PCINT20/XCK/T0) — Port D bit 4, pin change interrupt 20, USART external clock, Timer0 external clock |
| ピン 3 | GND — Ground |
| ピン 4 | VCC — Digital supply voltage |
| ピン 5 | GND — Ground |
| ピン 6 | VCC — Digital supply voltage |
| ピン 7 | PB6 (PCINT6/XTAL1/TOSC1) — Port B bit 6, crystal oscillator input 1, Timer oscillator input |
| ピン 8 | PB7 (PCINT7/XTAL2/TOSC2) — Port B bit 7, crystal oscillator output 2, Timer oscillator output |
| ピン 9 | PD5 (PCINT21/OC0B/T1) — Port D bit 5, pin change interrupt 21, Timer0 compare B output, Timer1 external clock |
| ピン 10 | PD6 (PCINT22/OC0A/AIN0) — Port D bit 6, pin change interrupt 22, Timer0 compare A output, analog comparator positive input |
| ピン 11 | PD7 (PCINT23/AIN1) — Port D bit 7, pin change interrupt 23, analog comparator negative input |
| ピン 12 | PB0 (PCINT0/CLKO/ICP1) — Port B bit 0, pin change interrupt 0, clock output, Timer1 input capture |
| ピン 13 | PB1 (PCINT1/OC1A) — Port B bit 1, pin change interrupt 1, Timer1 compare A output |
| ピン 14 | PB2 (PCINT2/SS/OC1B) — Port B bit 2, pin change interrupt 2, SPI slave select, Timer1 compare B output |
| ピン 15 | PB3 (PCINT3/OC2A/MOSI) — Port B bit 3, pin change interrupt 3, Timer2 compare A output, SPI master output / ISP MOSI |
| ピン 16 | PB4 (PCINT4/MISO) — Port B bit 4, pin change interrupt 4, SPI master input / ISP MISO |
| ピン 17 | PB5 (PCINT5/SCK) — Port B bit 5, pin change interrupt 5, SPI clock / ISP SCK |
| ピン 18 | AVCC — ADC supply voltage, must be connected to VCC via low-pass filter |
| ピン 19 | ADC6 — Analog input channel 6 |
| ピン 20 | AREF — Analog reference voltage for ADC |
| ピン 21 | GND — Ground |
| ピン 22 | ADC7 — Analog input channel 7 |
| ピン 23 | PC0 (PCINT8/ADC0) — Port C bit 0, pin change interrupt 8, ADC channel 0 |
| ピン 24 | PC1 (PCINT9/ADC1) — Port C bit 1, pin change interrupt 9, ADC channel 1 |
| ピン 25 | PC2 (PCINT10/ADC2) — Port C bit 2, pin change interrupt 10, ADC channel 2 |
| ピン 26 | PC3 (PCINT11/ADC3) — Port C bit 3, pin change interrupt 11, ADC channel 3 |
| ピン 27 | PC4 (PCINT12/SDA/ADC4) — Port C bit 4, pin change interrupt 12, TWI data line, ADC channel 4 |
| ピン 28 | PC5 (PCINT13/SCL/ADC5) — Port C bit 5, pin change interrupt 13, TWI clock line, ADC channel 5 |
| ピン 29 | PC6 (PCINT14/RESET) — Reset input, active low; also pin change interrupt 14 |
| ピン 30 | PD0 (PCINT16/RXD) — Port D bit 0, pin change interrupt 16, USART receive data |
| ピン 31 | PD1 (PCINT17/TXD) — Port D bit 1, pin change interrupt 17, USART transmit data |
| ピン 32 | PD2 (PCINT18/INT0) — Port D bit 2, pin change interrupt 18, external interrupt 0 |
主な用途
ATMEGA88PA-AUR の用途: 6 件s: Battery-Powered Sensor Nodes, Consumer Appliance Control, Industrial Sensing and Control, Arduino-Compatible Prototyping, Motor Control and PWM Drive, Metering and Measurement Front Ends.
Battery-Powered Sensor Nodes
The ATMEGA88PA-AUR fits battery-powered sensor nodes because picoPower technology minimizes sleep-mode current, and the 1.8 V to 5.5 V supply range allows direct operation from two AA cells or a small lithium primary cell. With power-down sleep and watchdog or pin-change wake-up, the MCU can spend over 99% of its time asleep, dramatically extending battery life. The internal 8 MHz RC oscillator removes the crystal and its associated power draw in low-accuracy timing applications. Sensor data is read through the 10-bit ADC (8 channels) or a digital interface (SPI, TWI), then transmitted via USART or RF module. The main trade-off is the 1 KB SRAM cap, which limits heavy buffering or protocol stacks.
おすすめ
Consumer Appliance Control
Home appliances such as coffee makers, fans, small pumps, and thermostats use the ATMEGA88PA-AUR for its low cost, wide 1.8 V to 5.5 V supply tolerance, and robust industrial temperature grade of -40C to +85C. The 23 GPIO lines drive keys, LEDs, relays, and triac control circuits directly through the timer compare outputs with hardware PWM, while the ADC reads thermistors and potentiometers for closed-loop control. The 8 KB Flash accommodates typical appliance state machines, button debouncing, and display multiplexing with room to spare. EEPROM stores user settings and calibration data across power cycles. The picoPower variants meet standby power expectations, and the 32-TQFP footprint scales to the pin-compatible ATMEGA168PA or ATMEGA328P if the feature set grows.
おすすめ
Industrial Sensing and Control
In industrial environments the ATMEGA88PA-AUR serves as a compact control and acquisition node: the 10-bit ADC samples transducers (current shunts via amplifiers, pressure bridges, potentiometers) while SPI and TWI buses interface with external ADCs, EEPROM, and displays. The -40C to +85C A-grade temperature range covers unconditioned cabinets, and the USART links to RS-485 transceivers for noisy long-distance networks. Three timers generate PWM for valve, fan, or heater control with hardware precision independent of software latency. Designers should add TVS protection on field-wired I/O and exploit the brown-out detector for deterministic restarts during supply sags, a critical behavior in industrial power environments with motor-induced disturbances.
おすすめ
Arduino-Compatible Prototyping
The ATmega88 family is a mainstay of Arduino-compatible prototyping: the ATMEGA88PA-AUR supports the Arduino IDE through AVR cores and programs over SPI with USBasp, Atmel-ICE, or Arduino-as-ISP tools. Its 20 MHz rating exceeds classic 16 MHz boards, and the 32-TQFP pinout matches the ATmega328P used in the Arduino Uno, so shields and wiring practices carry over directly. Developers prototype on the larger-memory ATmega328P and cost-down the production BOM to the ATMEGA88PA-AUR when the firmware fits in 8 KB Flash and 1 KB SRAM. This pin-identical scaling strategy lets teams validate hardware once, then optimize unit cost across the ATmega88/168/328 family without PCB respins.
おすすめ
Motor Control and PWM Drive
Small DC and stepper motor applications leverage the ATMEGA88PA-AUR's three timers: two 8-bit and one 16-bit timer with compare modes and PWM outputs generate phase-correct or fast PWM at hardware-timed resolution, while the 16-bit timer captures input edges for tachometer feedback. The ADC reads current-sense shunts or potentiometer position for closed-loop speed regulation, and interrupt-driven pin changes handle quadrature encoders at moderate resolution. Gate or driver signals on 23 GPIO lines interface to MOSFET drivers or H-bridges. Typical implementations run the core from the internal RC oscillator to reduce BOM cost while keeping PWM jitter minimal because timer clocks derive directly from the peripheral clock domain.
おすすめ
Metering and Measurement Front Ends
Utility submeters, environmental monitors, and portable test gadgets use the ATMEGA88PA-AUR's 10-bit ADC with 8 multiplexed channels and internal 1.1 V/2.56 V references to measure voltages, currents, and resistive sensors. Differential ADC modes with programmable gain (1x/20x) improve small-signal resolution, and EEPROM stores calibration constants written during production. The picoPower power-save mode with Timer/Counter 2 asynchronous operation (32.768 kHz crystal) enables periodic wake-up sampling ideal for battery-powered loggers, and results upload via USART. Where higher resolution is required, an external delta-sigma ADC connects over TWI. The key constraint remains the 1 KB SRAM, which limits long capture buffers; use streaming or the pin-compatible ATMEGA168PA/328P when buffering is central.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATMEGA88PA-AUR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATMEGA88PA-ANR | ATMEGA88PB-AUR | ATMEGA88A-AU | ATMEGA168PA-AUR | ATMEGA328P-AUR |
|---|---|---|---|---|---|---|
| Package | 32-TQFP (7x7 mm) | 32-TQFP (7x7 mm) - same | 32-TQFP (7x7 mm) - same | 32-TQFP (7x7 mm) - same | 32-TQFP (7x7 mm) - same | 32-TQFP (7x7 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 8 KB | 8 KB | 8 KB | 8 KB | 16 KB | 32 KB |
| SRAM | 1 KB | 1 KB | 1 KB | 1 KB | 2 KB | 2 KB |
| EEPROM | 512 B | 512 B | 256 B | 512 B | 512 B | 1 KB |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| picoPower Technology | Yes | Yes | Yes (PB low-power variant) | No (standard core) | Yes | Yes |
| Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 2.7 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
主な差別化要因
- picoPower sleep performance at ATmega88 cost （vs ATMEGA88A-AU)
- Cost floor within pin-compatible family （vs ATMEGA168PA-AUR)
- Trade-off: smallest memory in the drop-in family （vs ATMEGA328P-AUR)
設計ノート
Connect AVCC (pin 18) to VCC through an LC low-pass filter (e.g., 10 uH inductor with 100 nF ceramic) to keep ADC noise low, and route analog ground back to the GND pin separately from digital return currents. Enable the internal brown-out detector (BOD) at 2.7 V via fuse for 5 V systems to prevent EEPROM corruption during undervoltage. Estimated: sleep-mode battery life in power-down is dominated by leakage and watchdog current, so disable unused peripheral clocks via PRR register in firmware.
For ISP programming, keep the MOSI/MISO/SCK/RESET traces short and add a 100 nF decoupling capacitor directly across pins 4/6 (VCC) and 3/5 (GND). If a crystal is used, place it within a few millimeters of PB6/PB7 with 12-22 pF load capacitors. Reserve a 2x3 ISP header footprint even if production programming is done with pogo pins - in-circuit recovery via SPI costs nothing at layout time and saves a rework cycle when fuses lock out debugWIRE.
The 8 KB Flash fills quickly: leave headroom for bootloader-free operation or reserve 512 B+ for an optiboot-style bootloader. Per Microchip application note AVR094 (doc2553), migrating from ATmega8 designs requires checking register and fuse map differences even though pins are compatible. RESET (PC6, pin 29) can be reconfigured as I/O via fuse - avoid this unless high-voltage programming is available, since SPI programming is then impossible. Verify clock source fuses match your oscillator choice before first flash to avoid a bricked-looking device.
コンプライアンス情報
RoHS-compliant green packaging per distributor listings for the AUR suffix. Detailed REACH/halogen declarations available from Microchip product documentation.
