ATSAMD20J15A-AU - 48MHz Cortex-M0+ MCU | Microchip Technology
部品番号: ATSAMD20J15A-AU ✓ 生産中ATSAMD20J15A-AU 概要
A microcontroller is a semiconductor device that combines a processor core, nonvolatile program memory, volatile data memory, and peripherals within one integrated circuit. The ATSAMD20J15A-AU belongs to the SAM D20 family, whose ARM Cortex-M0+ architecture, low-power operating modes, and event-system peripherals support compact embedded control designs. It is positioned between a basic 8-bit controller and a higher-performance Cortex-M processor when applications require 32-bit computation without a large memory footprint.
Key features include 48 MHz processing, 32 KB of flash for firmware, 4 KB of SRAM, and 52 GPIO resources. The operating range of 1.62 V to 3.6 V allows use with common 3.3 V systems and suitable lower-voltage rails. The industrial temperature rating supports equipment intended for controlled industrial environments, while the 64-pin package provides more I/O than smaller SAM D20 devices and accommodates mixed analog, digital, and communication functions.
The SAM D20 architecture uses the ARM Cortex-M0+ processor and includes the Atmel Event System for deterministic communication between peripherals. Its peripheral arrangement allows timer, serial-interface, and application-specific functions to exchange events without requiring continuous central-processor intervention. The 32-bit instruction set and 48 MHz clock provide useful arithmetic and control performance for sensor controllers, communications nodes, and compact automation products.
Typical uses include industrial sensor modules, building and access-control equipment, low-power data loggers, motor or valve controllers, and embedded communications nodes. The 10 mm by 10 mm TQFP package is also useful for prototypes and designs where a leaded package is easier to inspect or solder than a leadless package. A production design should still confirm courtyard clearances, pin assignments, and assembly constraints against the manufacturer pinout.
The principal design consideration is power management. Although the operating voltage reaches 3.6 V, the application must remain within the device-specific operating range, and unused inputs must not be allowed to float. Decoupling, grounding, and peripheral assignment should follow the manufacturer reference schematic and pin-description tables to avoid noise injection or contention.
This page combines the core device specifications, verified package information, commercially useful sourcing guidance, drop-in alternatives, and practical design considerations for engineers evaluating the ATSAMD20J15A-AU for embedded control designs.
ドロップイン代替品: ATSAMD20J15A-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAMD20J15A-AU (同一形状・フットプリント) — 相違点: Package, ADC, Program Memory (Flash), DAC, GPIO Count.
ATSAMD20J15A-AN
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAMD20G15A-AU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAMD21J17A-CUT
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAMD20J15A-AU 最大定格&電気的特性
| Processor Core | ARM Cortex-M0+ |
| Architecture | 32-bit |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 4 KB |
| Operating Voltage Range | 1.62 V to 3.6 V |
| 動作温度範囲 | -40°C to +85°C |
| GPIO Count | 52 |
| パッケージ | 64-pin TQFP/LQFP |
| Package Dimensions | 10 mm x 10 mm |
| 実装タイプ | Surface mount |
| Product Series | SAM D20J |
| RoHS ステータス | Compliant |
| ADC Resolution | 10-bit |
| Timer Resolution | 12-bit |
| Core Performance | 2.14 CoreMark/MHz |
ATSAMD20J15A-AU 10 mm x 10 mm ピン配置ガイド
ATSAMD20J15A-AU (10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATSAMD20J15A-AU.
詳細は データシート をご参照ください。
主な用途
ATSAMD20J15A-AU の用途: 6 件s: Industrial Sensor Controller, Building Access Control, Low-Power Data Logger, Embedded Communications Node, Motor and Valve Control, Educational and Prototype Platform.
Industrial Sensor Controller
The ATSAMD20J15A-AU fits compact industrial sensor controllers that combine periodic digital measurement, local filtering, and a communications interface. Its 48 MHz ARM Cortex-M0+ core provides enough execution speed for protocol handling and control logic, while 32 KB of flash accommodates firmware and 4 KB of SRAM supports short working buffers. The 52 GPIO resources allow multiple digital inputs, alarm outputs, status indicators, and sensor-chip selection signals to share one controller. Operating from 1.62 V to 3.6 V supports 3.3 V industrial architectures, and the -40°C to +85°C rating suits controlled equipment rooms. Place the MCU close to sensor circuitry, keep analog and digital return paths separated, and verify every peripheral and interrupt assignment against the manufacturer pinout before finalizing the PCB.
おすすめ
Building Access Control
The ATSAMD20J15A-AU is suitable for access-control readers and lock-control modules that must respond predictably while handling several low-speed peripherals. Its 48 MHz Cortex-M0+ core can service debounced inputs, keypad scanning, indicator control, and serial storage concurrently, while the 32 KB flash and 4 KB SRAM provide ample room for credential logic and event handling. The 64-pin package exposes up to 52 GPIO resources for readers, door sensors, relays, and status signals. The 1.62 V to 3.6 V operating range supports 3.3 V powered door hardware, while the -40°C to +85°C rating covers common indoor and protected industrial environments. Debounce and security timing should be implemented with hardware-aware interrupt and timer assignments rather than uncontrolled polling loops.
おすすめ
Low-Power Data Logger
The ATSAMD20J15A-AU can serve as the control core of a low-power environmental or asset data logger. The 48 MHz Cortex-M0+ processor can format samples and manage storage transfers, and its 32 KB flash provides space for firmware, configuration, and compact event records. The 4 KB SRAM is sufficient for short acquisition windows when the design uses DMA or interrupts carefully instead of buffering large datasets in memory. Its 1.62 V to 3.6 V supply range allows operation from a regulated 3.3 V source, and the -40°C to +85°C specification supports deployed instrumentation. Low-power behavior must be validated against the manufacturer sleep-state current and wake-up timing. The firmware should preserve timestamps and sensor context while avoiding excessive bus polling between measurements.
おすすめ
Embedded Communications Node
The ATSAMD20J15A-AU is appropriate for small communications nodes that connect sensors or actuators to a serial network and need deterministic peripheral coordination. Its 48 MHz ARM Cortex-M0+ core can execute framing, timeout, and retry logic while the device's event-capable peripherals coordinate data movement. With 32 KB of flash and 4 KB of SRAM, the MCU is best suited to compact protocol stacks, gateway-lite functions, or local bridging rather than large packet buffering. The 1.62 V to 3.6 V operating range is compatible with common 3.3 V communications hardware, and the 64-pin package provides ample I/O for a transceiver, configuration pins, and fault indicators. Preserve signal-integrity spacing between radio or line-driver circuits and the MCU, and use the manufacturer reference layout as the basis for decoupling and clock routing.
おすすめ
Motor and Valve Control
The ATSAMD20J15A-AU can coordinate small motors, solenoids, and valves where accurate timing and a compact controller are more important than very high processing power. Its 48 MHz Cortex-M0+ core supports state-machine control, current-limit monitoring, and protection sequencing, while 32 KB of flash holds application code and 4 KB of SRAM supports transient control data. Up to 52 GPIO resources leave room for pulse-width-modulated drive signals, Hall inputs, fault flags, and interlocks. The 1.62 V to 3.6 V operating range supports 3.3 V logic systems, and the -40°C to +85°C rating fits industrial equipment cabinets. Separate noisy motor paths from sensitive control traces, include appropriate driver protection, and validate shutdown timing under worst-case load rather than relying only on nominal software timing.
おすすめ
Educational and Prototype Platform
The ATSAMD20J15A-AU is well suited to embedded-systems education and prototype development because it combines a familiar ARM Cortex-M0+ architecture, 32 KB of flash, 4 KB of SRAM, and a leaded 64-pin package. The 10 mm by 10 mm TQFP/LQFP outline is easier to inspect and hand-solder than a fine-pitch leadless package, reducing rework risk during early bring-up. Students can use the 52 GPIO resources for LEDs, switches, sensors, serial adapters, and basic motor demonstrations. The 1.62 V to 3.6 V operating range supports common laboratory rails, and the -40°C to +85°C specification provides a useful industrial reference point. Even for a prototype, follow the manufacturer reference schematic for decoupling and power routing, avoid using adapter boards with long unprotected signal runs, and validate pin multiplexing before connecting external modules.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAMD20J15A-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAMD20J15A-AN | ATSAMD20G15A-AU | ATSAMD21J17A-CUT |
|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 128 KB |
| Special Feature | SAM D20J family with Atmel Event System | SAM D20J family ordering variant | SAM D20G family with a different peripheral set | SAM D21 family with higher memory capacity |
主な差別化要因
- Compact 48 MHz Cortex-M0+ processing with 52 GPIO resources (vs ATSAMD21J17A-CUT)
- Direct ATSAMD20J15A family ordering option (vs ATSAMD20G15A-AU)
- Lead-based 10 mm by 10 mm assembly format (vs ATSAMD20J15A-AN)
設計ノート
Design the supply for the maximum operating current permitted by the manufacturer datasheet rather than the average current in an idle code path. Keep the ATSAMD20J15A-AU within its 1.62 V to 3.6 V operating range under startup, sleep transitions, peripheral activity, and I/O loading. Place the required bulk and high-frequency decoupling capacitors close to the supply and ground pins, use a low-impedance ground plane, and confirm regulator tolerance and transient response at the 3.3 V rail. If the board also drives relays or motors, separate those switching currents from the MCU supply path.
Use the 64-pin TQFP/LQFP package drawing and manufacturer reference layout for the land pattern, courtyard, solder-mask definition, and paste stencil. Keep traces to sensitive analog inputs short, provide a continuous ground reference beneath signal routes, and separate clock, communication, and switching-control paths where return currents could couple. The 52 GPIO resources offer flexibility, but alternate-function conflicts and peripheral event routing must be checked before assigning pins. Verify exposed pad, thermal, and assembly details against the exact package revision rather than relying on a generic 64-pin drawing.
Avoid treating a related SAM D20 or SAM D21 suffix as automatically interchangeable. Peripheral sets, peripheral numbering, interrupt channels, boot behavior, memory organization, qualification, and ordering temperature codes can differ even when the package and CPU frequency match. Before substituting ATSAMD20J15A-AN, ATSAMD20G15A-AU, or ATSAMD21J17A-CUT, compare the manufacturer pin table, peripheral matrix, electrical limits, and migration notes. Also account for firmware size when moving to a device with different SRAM or flash capacity.
コンプライアンス情報
The product listing identifies the ATSAMD20J15A-AU as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified.