ATSAME53J20A-AU - 120MHz Cortex-M4F 1MB MCU | Microchip
部品番号: ATSAME53J20A-AU ✓ 生産中ATSAME53J20A-AU 概要
An MCU is a programmable semiconductor that integrates a processor core, memory, and peripherals on one package. The SAM E53 series belongs to the broader hierarchy of ARM Cortex-M4F microcontroller, 32-bit microcontroller, embedded processor, and semiconductor. Its Cortex-M4F core combines deterministic real-time execution with single-precision floating-point acceleration, making it suitable for connected industrial equipment that performs control, networking, and signal-processing tasks.
The principal features of the ATSAME53J20A-AU include its 120 MHz maximum operating frequency, 1 MB Flash configuration, 1 M x 8 organization, and ECC support in both Flash and SRAM. The Ethernet MAC supports 10/100 operation, while the integration of external-memory interfaces, serial peripherals, and general-purpose I/O enables compact control designs. The 64-TQFP package also supports conventional surface-mount assembly and provides a defined 10 mm by 10 mm PCB footprint.
The Cortex-M4F architecture uses a 32-bit register set and an instruction set designed for efficient embedded control. Its floating-point unit accelerates single-precision arithmetic without requiring an external digital signal processor. Dual-panel Flash with ECC improves firmware availability when one programming panel is compromised, while ECC-protected SRAM helps detect memory errors in applications where data integrity and predictable recovery are important.
Typical uses include industrial Ethernet controllers, sensor gateways, building-automation equipment, motor and motion controllers, and connected industrial sensors. The combination of Ethernet connectivity, substantial embedded Flash, and ECC-protected memory is particularly useful when local control, network communications, and field-update capability must coexist in one controller.
A critical design consideration is the distinction between the 64-pin TQFP target package and the 64-pin QFN package used by some related SAM E53 variants. Before selecting a substitute, verify the exact package drawing, exposed-pad arrangement, pin functions, temperature range, and peripheral configuration in the Microchip documentation. Do not treat every related ATSAME53J20A order code as a footprint-compatible replacement.
This page combines electrical characteristics, package details, application guidance, practical design considerations, and qualified same-footprint alternatives. It also distinguishes genuine mechanical interchangeability from related devices that differ in package, temperature grade, packing format, memory configuration, or integrated networking features.
ドロップイン代替品: ATSAME53J20A-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAME53J20A-AU (同一形状・フットプリント) — 相違点: Package, ADC, CAN, Flash Memory, SRAM.
ATSAME53J20A-AZ-SL3
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAME53J20A-AU-EFP
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAME51J20A-AU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAME53J20A-AU 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Maximum CPU Frequency | 120 MHz |
| Processor Core | ARM Cortex-M4 with single-precision FPU |
| Flash Memory | 1 MB (1 M x 8) |
| Flash Organization | Dual-panel Flash with ECC |
| SRAM | Up to 256 KB with ECC |
| Ethernet MAC | 10/100 Ethernet MAC |
| 電源電圧 | 1.71 V to 3.63 V |
| パッケージ | 64-pin TQFP (10 mm x 10 mm) |
| Temperature Grade | 85°C indicated in the product listing |
| 実装タイプ | Surface mount |
| Order Code | ATSAME53J20A-AU |
| RoHS ステータス | RoHS |
| Architecture | ARM 32-bit |
| データバス幅 | 32-bit |
ATSAME53J20A-AU 64-pin tqfp (10 mm x 10 mm) ピン配置ガイド
ATSAME53J20A-AU (64-pin tqfp (10 mm x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATSAME53J20A-AU.
詳細は データシート をご参照ください。
主な用途
ATSAME53J20A-AU の用途: 6 件s: Industrial Ethernet Sensor Gateway, Connected Motor Controller, Building Automation Controller, Precision Data Acquisition System, Secure Connected Equipment Controller, Networked Environmental Monitor.
Industrial Ethernet Sensor Gateway
The ATSAME53J20A-AU fits an industrial sensor gateway because its 120 MHz Cortex-M4F core can process measurements while the integrated 10/100 Ethernet MAC handles network communication. The 1 MB of dual-panel ECC Flash provides room for firmware, communication stacks, configuration data, and update handling, while up to 256 KB of ECC-protected SRAM supports packet buffers and real-time control state. In this design, the MCU would sample local sensors, format the data locally, and forward it through Ethernet. The tradeoff is that Ethernet PHY implementation, magnetic isolation, connector protection, and precise peripheral validation remain outside the MCU and must be designed separately.
おすすめ
Connected Motor Controller
The ATSAME53J20A-AU is suitable for a connected motor controller because the 120 MHz Cortex-M4F core combines general control processing with single-precision floating-point acceleration, while 1 MB Flash stores control code and configuration. Its integrated 10/100 Ethernet MAC allows the controller to report position, current, fault state, and operating commands over an industrial network. The device can execute feedback-control calculations and manage communications without an external network processor. Designers must allocate peripheral pins carefully for PWM capture, encoder interfaces, control outputs, and Ethernet, and must validate update timing under the worst interrupt load and communication traffic.
おすすめ
Building Automation Controller
ATSAME53J20A-AU supports building-automation designs that coordinate sensors, actuators, local schedules, and network management. Its 120 MHz ARM Cortex-M4F processor can execute communication protocols and control logic, while ECC-protected Flash and SRAM support dependable operation over a long service life. The 10/100 Ethernet MAC enables integration with wired building networks, and the single-precision FPU is useful for scaling, filtering, and energy-management calculations. A practical implementation places the MCU near the controller's power and communications sections, then uses isolated Ethernet components where required. Firmware should include watchdog recovery, validated configuration storage, and graceful communication behavior during network outages.
おすすめ
Precision Data Acquisition System
The ATSAME53J20A-AU can serve as the control processor in a precision data-acquisition system requiring deterministic sampling, local processing, and Ethernet reporting. The 120 MHz Cortex-M4F core provides computational headroom for filtering and calibration, while its floating-point unit accelerates single-precision signal calculations. Up to 256 KB of ECC-protected SRAM can hold working buffers, and the 1 MB dual-panel Flash stores code, calibration coefficients, and logs. The MCU still requires suitable analog front-end components, precision references, and anti-aliasing filters. Its 1.71 V to 3.63 V operating range allows integration with low-voltage sensor and analog sections, but every analog and digital rail must meet the system’s noise and grounding requirements.
おすすめ
Secure Connected Equipment Controller
ATSAME53J20A-AU is appropriate for connected equipment requiring the SAM E53 family's security-oriented controller capabilities alongside network connectivity. Its 120 MHz Cortex-M4F core can perform protocol processing and control tasks, while the 10/100 Ethernet MAC supports communication with a host or supervisory controller. ECC-protected dual-panel Flash and SRAM improve error detection in systems that demand reliable firmware and operating data. Security design still requires appropriate key provisioning, protected update mechanisms, access-control policy, and secure boot integration. When replacing it with an ATSAME51J20A-AU, engineers should compare the complete E53 versus E51 peripheral and security-feature requirements rather than relying on matching core frequency and Flash capacity.
おすすめ
Networked Environmental Monitor
The ATSAME53J20A-AU can be used in a networked environmental monitor to acquire sensor readings, perform calibration and filtering, and report measurements through Ethernet. The 120 MHz Cortex-M4F core provides more than enough parallel processing capacity for typical temperature, humidity, gas, and air-quality sensor nodes, while the single-precision FPU assists with scaling and filtering. Its 1 MB Flash supports local data logging and field updates, and ECC-protected SRAM improves data integrity during operation. The integrated Ethernet MAC reduces the need for a separate communications MCU, but a suitable transceiver, protection network, and connector are still required. Power-consumption profiling should include sensor duty cycling and network idle behavior.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAME53J20A-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAME53J20A-AZ-SL3 | ATSAME53J20A-AU-EFP | ATSAME51J20A-AU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP (10 mm x 10 mm) | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP |
| Processor Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB |
| Product Family | SAM E53 | SAM E53 | SAM E53 | SAM E51 |
| Shipping Configuration | AU order code | Tray indicated by SL3 listing | EFP ordering suffix | AU ordering suffix |
主な差別化要因
- Combines E53-family connectivity with substantial ECC-protected memory (vs ATSAME51J20A-AU)
- Same 120 MHz Cortex-M4F performance while retaining a 64-pin TQFP footprint (vs ATSAME53J20A-AZ-SL3)
- Maintains the same core and memory class in an alternate ordering configuration (vs ATSAME53J20A-AU-EFP)
設計ノート
Treat the 64-pin TQFP footprint as a controlled mechanical interface. Check pad dimensions, pin-1 orientation, solder-mask clearance, paste volume, and courtyard against the Microchip package drawing before releasing the PCB. Do not reuse a 64-pin QFN footprint for ATSAME53J20A-AU: the lead pitch, body dimensions, pad arrangement, and exposed-pad requirements differ. Place decoupling capacitors close to the applicable supply pins, provide a clean ground reference, and route high-current or high-speed signals away from sensitive analog inputs.
Plan the Ethernet implementation as a coordinated signal-integrity and power-distribution task. The MCU's integrated MAC does not include a physical transceiver, so the board needs an appropriate Ethernet PHY or companion controller, magnetics or coupling components where required, controlled-impedance routing, and ESD protection. Confirm the supported MII/RMII configuration and pin mapping in the manufacturer pin table. Keep the digital communications section separated from analog sensor front ends to reduce coupling into precision measurements.
Avoid approving a replacement from the base MPN alone. ATSAME53J20A-AU, ATSAME53J20A-AZ-SL3, and ATSAME53J20A-AU-EFP can differ in temperature, packing, or qualification coding, while ATSAME51J20A-AU is from a different family. For every proposed substitute, compare the full ordering information, pinout, electrical characteristics, peripheral map, startup behavior, and qualification requirements. Also ensure the installed bootloader and application firmware support every peripheral used by the original design.
Budget the MCU power path across the complete 1.71 V to 3.63 V operating range. Core, Ethernet, SRAM, and I/O activity can change current demand, so validate the regulator's transient response, minimum load behavior if applicable, and startup sequencing against the Microchip recommended operating conditions. Use local bulk and high-frequency decoupling according to the manufacturer layout guidance, and verify that external Ethernet components do not inject excessive noise into sensitive supply nodes.
Although the TQFP package supports conventional PCB heat spreading, the ATSAME53J20A-AU is normally not the dominant thermal element at 120 MHz. Thermal assessment should include the regulator, Ethernet magnetics or PHY, external memory, and nearby power components as well as the MCU. Preserve copper around the package, avoid placing thermally restrictive assemblies beneath it, and test the maximum clock, I/O, Ethernet, and memory activity expected in the finished system.
コンプライアンス情報
The component listing identifies the ATSAME53J20A-AU as RoHS. No complete REACH, halogen-free, conflict-minerals, or automotive-qualification statement was identified for the exact order code.