ATSAMV71Q21B-CB - 300MHz Cortex-M7 Automotive MCU | Microchip
部品番号: ATSAMV71Q21B-CB ✓ 生産中ATSAMV71Q21B-CB 概要
A microcontroller such as the ATSAMV71Q21B-CB is a programmable semiconductor that integrates a processor core, Flash program memory, SRAM, peripherals, clock circuitry, and communication interfaces onto one device. It belongs to the MCU hierarchy within embedded semiconductors and supports real-time control, communications, data acquisition, and safety-oriented monitoring. Unlike a general-purpose microprocessor, the integrated memory and peripheral set allow a compact embedded design to execute control software directly from the device.
The principal benefits are a 300 MHz Cortex-M7 processing rate, 2 MB of Flash, and an automotive-grade product profile. The snippet identifies the Flash organization as 2M x 8, while a related distributor listing identifies 384 kB of SRAM. A double-precision FPU accelerates floating-point calculations used in control loops, signal processing, and automotive algorithms. The 144-TFBGA package also supports dense pin availability in a compact 10 x 10 mm footprint.
The SAM V71 family is designed around a 32-bit ARM Cortex-M7 RISC core operating at up to 300 MHz. Its Flash-based architecture supports embedded firmware and real-time workloads, while the integrated FPU provides efficient double-precision arithmetic. The automotive qualification indicated by the part information and manufacturer family description supports its use in vehicle electronic systems where environmental robustness and component traceability are important.
Typical applications include automotive body-control modules, comfort systems, sensor aggregation, gateway controllers, motor and valve control, dashboard interfaces, and communication gateways. The 300 MHz Cortex-M7 core and 384 kB SRAM provide processing and working-memory capacity for real-time control, while the 2 MB Flash supports larger embedded applications and updateable firmware.
Designers should preserve the exact 144-ball TFBGA land pattern, power, ground, and decoupling requirements from the Microchip datasheet. Pin multiplexing, peripheral assignment, clock configuration, and startup behavior must be validated against the device's pin-description and electrical tables. Because the package is dense and automotive systems impose strict EMC and thermal requirements, PCB stack-up, exposed-ball thermal design, and signal-integrity planning are especially important.
This page combines manufacturer family information, exact ordering-code details, package identification, source-backed pricing context, replacement analysis, and practical engineering guidance to support faster component selection and hardware planning.
ドロップイン代替品: ATSAMV71Q21B-CB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAMV71Q21B-CB (同一形状・フットプリント) — 相違点: Package, ADC, Core, Ethernet, RoHS Status.
ATSAMV71Q21B-CBT
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAMV71Q21A
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAMV71Q21C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAMV70Q21
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAMV71Q21B-CB 最大定格&電気的特性
| Product Type | 32-bit automotive Flash microcontroller |
| Processor Core | ARM Cortex-M7 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 300 MHz |
| Floating-Point Unit | Double precision FPU |
| Flash Memory | 2 MB |
| Flash Organization | 2M x 8 bits |
| SRAM | 384 kB |
| 電源電圧 | 3.3 V |
| パッケージ | 144-TFBGA (10 x 10 mm) |
| ピン数 | 144 balls |
| 実装タイプ | Surface mount |
| Application | Automotive |
| Automotive Qualification | AEC-Q100 |
| CoreMark Performance | 5.04 CoreMark/MHz |
| Development Tool | MPLAB X Integrated Development Environment |
| Compiler Support | MPLAB XC32 and MPLAB XC32++ compilers |
ATSAMV71Q21B-CB 144-tfbga (10 x 10 mm) ピン配置ガイド
ATSAMV71Q21B-CB (144-tfbga (10 x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATSAMV71Q21B-CB.
詳細は データシート をご参照ください。
主な用途
ATSAMV71Q21B-CB の用途: 6 件s: Automotive Body Control Module, Vehicle Sensor Aggregation, Automotive Communication Gateway, Motor and Valve Control, ADAS Sensor Interface Controller, Diagnostic and Telemetry Unit.
Automotive Body Control Module
The ATSAMV71Q21B-CB fits centralized vehicle body-control platforms that coordinate lamps, locks, windows, wipers, and comfort features. Its 300 MHz Cortex-M7 core provides real-time scheduling capacity, while 2 MB Flash supports protocol handlers, diagnostic logic, and application firmware. The 384 kB SRAM allows larger buffers and state machines to coexist. In a TFBGA design, engineers should preserve the manufacturer's ball map and provide the required decoupling network. The part's automotive-oriented profile and AEC-Q100 marking make it more appropriate than a generic MCU for qualified vehicle electronics, subject to the exact temperature grade and production qualification required by the program.
おすすめ
Vehicle Sensor Aggregation
The ATSAMV71Q21B-CB can consolidate inputs from body, chassis-adjacent, and environmental sensors before forwarding selected information over vehicle networks. Its Cortex-M7 processing rate and double-precision FPU allow filtering, scaling, and diagnostic algorithms to run without a separate high-performance processor. With 2 MB Flash, the device can retain calibration data and substantial field-updatable logic, while 384 kB SRAM supports working buffers. Designers should use the manufacturer pin-muxing tables to assign analog and communication interfaces, validate ADC or peripheral characteristics against the electrical limits, and isolate sensitive sensor paths according to the reference layout.
おすすめ
Automotive Communication Gateway
The ATSAMV71Q21B-CB is suitable for a vehicle gateway that translates data between communication domains and manages diagnostic or control messages. A 300 MHz Cortex-M7 core supports protocol concurrency and real-time event handling, while 2 MB Flash accommodates protocol stacks, routing tables, and diagnostic firmware. The 384 kB SRAM can support message buffering and network context. Because gateway boards combine multiple interfaces with potential electromagnetic interference, layout should follow the manufacturer's power, ground, and decoupling guidance. The TFBGA package also requires careful ball-escape planning and adequate PCB thermal capacity to keep junction temperature within device limits.
おすすめ
Motor and Valve Control
The ATSAMV71Q21B-CB can serve as the control processor in compact automotive modules that supervise motors, valves, pumps, or other actuators. The 300 MHz Cortex-M7 performance allows fast control-loop execution, and its double-precision FPU is useful for filtering and proportional-integral-derivative calculations. The 2 MB Flash capacity provides room for control algorithms and field-service updates, while 384 kB SRAM supports feedback data and diagnostic state. Engineers should define the PWM, timer, and feedback assignments from the datasheet, verify output timing and drive current at the board level, and include suitable protection and grounding for inductive or externally driven loads.
おすすめ
ADAS Sensor Interface Controller
The ATSAMV71Q21B-CB can serve as a high-performance interface controller in automotive sensing and driver-assistance subsystems that require deterministic data movement. Its Cortex-M7 core runs at 300 MHz with a double-precision FPU, supporting signal conditioning, object-data formatting, and communication handling. The 2 MB Flash accommodates configuration, diagnostics, and updateable middleware, while 384 kB SRAM provides packet and sample buffering. Signal integrity is a central constraint: use short, continuously referenced routes, controlled impedance where applicable, solid ground planes, and the decoupling arrangement prescribed by Microchip. High-speed interface timing and automotive EMC requirements must still be validated independently of the MCU instruction performance.
おすすめ
Diagnostic and Telemetry Unit
The ATSAMV71Q21B-CB fits a vehicle diagnostic or telematics unit that records operating data, manages faults, and communicates service information. Its 2 MB Flash provides capacity for event logs, diagnostic tables, communication firmware, and update images, while the 300 MHz Cortex-M7 core leaves performance margin for protocol processing and background tasks. The 384 kB SRAM allows temporary storage of frames and diagnostic records. In a telemetry design, the device should be paired with a suitable network interface and power-management subsystem. Firmware should implement secure update and communication policies appropriate to automotive use, while the PCB must control ground bounce and supply transients around the dense TFBGA device.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAMV71Q21B-CB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAMV71Q21B-CBT | ATSAMV71Q21A | ATSAMV71Q21C | ATSAMV70Q21 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-TFBGA (10x10) | 144-TFBGA (10x10) | 144-TFBGA (10x10) | 144-TFBGA (10x10) | 144-TFBGA (10x10) |
| Ordering Code | ATSAMV71Q21B-CB | ATSAMV71Q21B-CBT | ATSAMV71Q21A | ATSAMV71Q21C | ATSAMV70Q21 |
主な差別化要因
- Exact 300 MHz Cortex-M7 processing configuration (vs ATSAMV71Q21B-CBT)
- Identified 144-TFBGA footprint for dense automotive control designs (vs ATSAMV70Q21)
- Automotive-oriented family positioning (vs ATSAMV71Q21A)
設計ノート
Assign every ball directly from the Microchip pin-description table for the 144-TFBGA package. Check power, ground, analog, communication, debug, and reserved functions against the selected peripheral configuration before routing. Keep decoupling and bulk-capacitor placement close to the corresponding balls, preserve the manufacturer-recommended power and ground topology, and avoid routing high-speed signals across split or noisy supply regions.
The 10 x 10 mm TFBGA relies on its soldered balls and PCB copper for heat transfer, so thermal performance depends strongly on layer count, copper area, and airflow. Estimate worst-case junction temperature using the actual ambient temperature, estimated device dissipation, and the PCB-specific thermal model. Add thermal vias and copper spreading only where consistent with Microchip layout guidance, and avoid placing the device directly above heat-generating components.
Validate each high-speed interface with the device's documented timing, I/O, and multiplexing requirements rather than treating the 300 MHz CPU clock as a direct interface-rate guarantee. Maintain continuous reference planes, minimize stubs and via transitions, and apply the manufacturer's drive-strength and load settings in firmware. For external communication links, include series termination where the reference design or signal-integrity analysis calls for it.
Do not substitute ATSAMV71Q21B-AABT for ATSAMV71Q21B-CB without redesigning the PCB: the AABT listing identifies a 144-LQFP package, while the target is a 144-TFBGA. Also verify the exact ATSAMV71Q21B suffix, flash configuration, temperature grade, programming method, and qualification status. A shared pin count does not make packages or ballouts interchangeable.
コンプライアンス情報
The component information identifies the device as automotive AEC-Q100. Separate RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not found and are therefore recorded as unknown.