BD37542FS-E2 - 3-Band Audio Tone Processor | ROHM
部品番号: BD37542FS-E2 ✓ 生産中BD37542FS-E2 概要
An audio tone processor is a functional block within the broader audio-signal-chain hierarchy. It receives one or more analog audio channels, applies adjustable frequency-dependent gain, and provides shaped outputs for loudspeakers, amplifiers, or downstream audio devices. In the ROHM BD37542FS series, the integrated bass, mid, and treble equalizer supports repeatable tone adjustment with fewer external components and less circuit-board area than a conventional passive or active equalizer.
The principal features include a built-in three-band equalizer, three-channel processing, I2C bus control, parametric tone adjustment without external components, and a dedicated subwoofer output function. The common control software identified by ROHM supports the BD37542FS family and is intended to improve development efficiency across related audio-system designs. The three-channel structure permits independent processing of multiple audio paths when the associated circuit configuration is designed for that use.
The BD37542FS-E2 belongs to the SSOP-A surface-mount package family, which supports compact consumer-audio hardware. Its 32-pin interface provides the connections required for power, analog signal paths, equalizer functions, and digital control. Because the exact pin assignments are not stated on the product-page listing, board designers should use the pin-description table in the manufacturer datasheet when assigning tracks, especially for I2C communication and the subwoofer output.
Typical applications include compact stereo and multimedia audio products, amplified speakers, karaoke equipment, home-audio systems, and sound-processing modules where user-adjustable bass, midrange, and treble are valuable. The integrated equalizer can shorten analog filter design time, while the subwoofer output supports space-saving system architectures without adding a separate equalizer stage.
When laying out a design, treat the I2C interface and analog audio paths as separate functional areas to minimize digital coupling into sensitive signals. Confirm the supported supply range, external component requirements, control-register implementation, and output-loading conditions in the manufacturer datasheet before releasing production hardware.
This page organizes the verified product identity, package information, functional features, application guidance, design cautions, and sourcing questions for BD37542FS-E2. It also distinguishes documented capabilities from details that require direct verification against the ROHM datasheet, helping engineers plan sourcing, schematic design, and PCB implementation more efficiently.
ドロップイン代替品: BD37542FS-E2 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: BD37542FS-E2 （同一形状・フットプリント） — 相違点: Equalizer Bands, Package, Product Type, Subwoofer Output.
BD37530FS-E2
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
BD37540FS-E2
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
BD37541FS-E2
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →BD37542FS-E2 最大定格＆電気的特性
| Product Type | Sound processor with built-in three-band equalizer |
| Processing Channels | 3 channels |
| Equalizer Bands | 3 bands: bass, midrange, and treble |
| External Equalizer Components | 0 components required for parametric equalizer adjustment |
| Subwoofer Output | 1 built-in subwoofer output function |
| Digital Control Interface | I2C bus |
| Control Software Support | Common control software for the BD37542FS series |
| Supply Voltage Range | 7 V to 9.5 V |
| パッケージ | 32-pin SSOP-A |
| 実装タイプ | Surface mount |
| ピン数 | 32 pins |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
BD37542FS-E2 32-pin ssop-a ピン配置ガイド
BD37542FS-E2 (32-pin ssop-a パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: BD37542FS-E2.
詳細は データシート をご参照ください。
主な用途
BD37542FS-E2 の用途: 6 件s: Compact Stereo Amplifier, Home Audio Speaker, Multimedia Speaker System, Karaoke Audio Module, Portable Audio Device, Active Subwoofer Control.
Compact Stereo Amplifier
The BD37542FS-E2 fits compact stereo amplifier designs that require user-adjustable bass, midrange, and treble without a discrete equalizer network. Its three-channel processing architecture and built-in parametric equalizer reduce the number of external tone-shaping components, while I2C control permits presets to be selected by a system controller. The 7 V to 9.5 V supply range is appropriate for systems designed around that rail. Before finalizing the analog stage, verify the input impedance, allowed signal amplitude, output-loading limits, and whether the intended amplifier can accept the processor’s signal configuration.
おすすめ
Home Audio Speaker
In a home-audio speaker, the BD37542FS-E2 can implement digital control of bass, midrange, and treble so listeners can optimize tonal balance for different listening positions or source material. The built-in equalizer avoids the external component count of a conventional three-band passive network, and the subwoofer output provides a space-saving route to a bass channel. System integration should account for the 7 V to 9.5 V supply range, analog signal levels, and I2C control wiring while keeping the processor away from high-current amplifier paths.
おすすめ
Multimedia Speaker System
The BD37542FS-E2 is well suited to multimedia speaker systems where PC, mobile, or streaming audio requires responsive tone presets. I2C control allows a host processor to select bass, midrange, and treble settings without manual potentiometers, while three-channel processing supports a more flexible signal architecture. The integrated equalizer helps shorten the development cycle by reducing discrete filtering stages. Designers should still verify the source-level compatibility, speaker crossover strategy, subwoofer connection, and behavior during power-up or control-bus loss.
おすすめ
Karaoke Audio Module
For karaoke equipment, the BD37542FS-E2 can provide repeatable bass, midrange, and treble adjustment while preserving a compact control layout. Its three-band parametric equalizer is adjusted digitally through I2C, allowing equalizer presets for music, microphone, or combined playback paths without replacing analog components. The subwoofer output can support a separate low-frequency channel in a space-limited enclosure. Before use, confirm whether the karaoke system needs microphone preamplification, echo processing, or limiting functions outside the tone processor.
おすすめ
Portable Audio Device
The BD37542FS-E2 can support tone adjustment in a portable audio product when its 7 V to 9.5 V operating range matches the internal power architecture. Digital equalizer control simplifies user-interface integration and permits stored presets, while the SSOP-A package supports board-area reduction. A portable implementation must include adequate decoupling, stable analog grounding, and careful control of the 32-pin layout. Confirm startup, power-consumption, operating-temperature, and signal-path requirements before selecting it for battery-operated or thermally constrained equipment.
おすすめ
Active Subwoofer Control
The BD37542FS-E2 can support an active subwoofer signal chain where low-frequency level and tonal balance need programmable adjustment. Its built-in subwoofer output and three-band equalizer allow bass, midrange, and treble shaping without a separate tone-control circuit, while I2C provides a path to system-level presets. Integration still requires verification of the subwoofer channel routing, amplifier input characteristics, low-frequency phase behavior, and output-noise expectations. The processor should remain on a stable analog supply rail to preserve sound quality across volume settings.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: BD37542FS-E2 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | ROHM Semiconductor |
| Package | 32-pin SSOP-A |
| Product Type | Audio tone processor |
| Processing Channels | 3 channels |
| Equalizer Bands | 3 bands: bass, midrange, and treble |
| Control Interface | I2C bus |
| Supply Voltage Range | 7 V to 9.5 V |
| Subwoofer Output | Built-in subwoofer output function |
| External Equalizer Components | None required for parametric equalizer adjustment |
| Control Software | Common control software supported for the BD37542FS series |
主な差別化要因
- Integrated three-band equalizer reduces discrete tone-network complexity （vs Generic discrete three-band equalizer network)
- Digital configuration supports repeatable presets and user control （vs Manual three-band analog tone control)
- Built-in subwoofer route supports compact multiway audio layouts （vs Separate subwoofer tone-control circuit)
設計ノート
Assign the pin functions directly from the manufacturer datasheet before PCB routing. The searchable product information identifies a 32-pin SSOP-A package but does not list every terminal, so confirm pin 1, analog inputs, outputs, I2C data and clock, supply, ground, and reserved connections. Route the I2C bus away from the audio inputs and place the associated pull-up components near the controller or processor when electrically appropriate.
Treat the analog and digital sections as separate placement zones. Place input and output bypassing capacitors close to their intended supply or reference pins, use a continuous ground reference under the device where the package and board stack-up permit, and keep the I2C traces away from sensitive equalizer inputs. The integrated equalizer reduces external components, but careful decoupling and grounding remain necessary to preserve low-noise audio performance.
Design the supply rail for the documented 7 V to 9.5 V operating range and provide local decoupling appropriate to the analog and digital sections. Confirm ripple, startup, and power-consumption requirements in the manufacturer datasheet. Because the processor controls sensitive tone-shaping networks, an unstable or noisy supply can degrade sound quality even when the I2C settings are correct.
Do not assume that the shortened BD37542FS family designation is a drop-in match for the full BD37542FS-E2 suffix. Compare the exact package, pin assignments, control registers, supply limits, and operating-temperature grade before substitution. Likewise, a generic tone processor may offer similar functions but remain unsuitable if its I2C address, register map, channel routing, or SSOP-A footprint differs.
コンプライアンス情報
The manufacturer product page identifies the BD37542FS series and its sound-processing features but the cited product records do not state the requested compliance statuses.
