C8051F045-GQ - 25MHz 64KB Flash 8051 MCU | Silicon Labs
部品番号: C8051F045-GQ ✓ 生産中C8051F045-GQ 概要
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The 8051 architecture is a CISC instruction-set family widely used in embedded systems, while the C8051F04x generation adds mixed-signal conversion and communications capabilities. Within the product hierarchy, the C8051F045-GQ is an 8-bit flash MCU, an embedded controller, and a member of the semiconductor and integrated-circuit categories.
The principal features of this device include 64 KB of in-system programmable flash, operation up to 25 MHz, 25 MIPS throughput, a 10-bit ADC, and CAN communication. Its 2.7 V to 3.6 V operating range supports low-voltage embedded systems. The 64-pin TQFP package exposes mixed-signal and communication functions while remaining compatible with surface-mount assembly and automated PCB manufacturing.
The C8051F045-GQ uses a compatible 8051 core and provides a substantial memory-to-pin balance for a small-format system controller. Its flash memory allows firmware to be programmed or updated without removing the device, while the 4.25 KB RAM supports working data, communication buffers, and control routines. The mixed-signal ADC makes the device useful where a design must acquire analog measurements and perform local control or protocol processing on the same board.
Typical applications include industrial CAN nodes, motor and actuator controllers, building automation modules, instrumentation front ends, CAN-connected sensors, and compact embedded control boards. In each case, the 25 MHz processor and 64 KB flash provide useful performance without requiring a separate analog-to-digital converter, while CAN supports structured communication with other embedded modules.
Designers should treat the 3.6 V maximum supply as a firm constraint and verify the pin-assignment table, analog-reference requirements, oscillator connections, and decoupling recommendations in the manufacturer datasheet. Firmware replacement also requires checking reset behavior, bootloader expectations, and the C8051F04x development-tool configuration rather than assuming every family member is interchangeable.
ドロップイン代替品: C8051F045-GQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: C8051F045-GQ (同一形状・フットプリント) — 相違点: Package, ADC Resolution, Microcontroller Type, On-Chip RAM, Program Memory Type.
C8051F047-GQ
✅ ドロップイン価格はお問い合わせください
データシートを見る →C8051F043-GQ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F041-GQ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F065-GQ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F045-GQ 最大定格&電気的特性
| Microcontroller Type | 8-bit mixed-signal flash MCU |
| Processor Architecture | 8051-compatible CISC |
| 最大クロック周波数 | 25 MHz |
| Maximum Instruction Throughput | 25 MIPS |
| Program Memory | 64 KB flash |
| Program Memory Organization | 64K x 8 bits |
| On-Chip RAM | 4.25 KB |
| ADC Resolution | 10 bits |
| Communication Interface | CAN |
| Supply Voltage Range | 2.7 V to 3.6 V |
| 動作温度範囲 | -40 °C to +85 °C |
| パッケージ | 64-pin TQFP, 10 mm x 10 mm |
| 実装タイプ | Surface mount |
C8051F045-GQ 64-pin tqfp, 10 mm x 10 mm ピン配置ガイド
C8051F045-GQ (64-pin tqfp, 10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: C8051F045-GQ.
詳細は データシート をご参照ください。
主な用途
C8051F045-GQ の用途: 6 件s: Industrial CAN Control Nodes, Precision Sensor Conditioning, Building Automation Modules, Motor and Actuator Control, CAN-Connected Test and Measurement, Embedded Communication Gateways.
Industrial CAN Control Nodes
The C8051F045-GQ fits compact CAN control nodes because it combines an 8051-compatible 25 MHz core with CAN connectivity, 64 KB of flash, and 4.25 KB of RAM in one 64-pin TQFP device. A node can acquire analog process information, run local control logic, and exchange commands or status data over the same bus without a separate protocol controller. The 2.7 V to 3.6 V operating range simplifies low-voltage industrial equipment design. Before layout release, verify the CAN transceiver interface, termination requirements, oscillator network, decoupling, and all multiplexed pin assignments in the manufacturer datasheet.
おすすめ
Precision Sensor Conditioning
The C8051F045-GQ is useful in sensor-conditioning equipment because its 10-bit ADC can acquire analog inputs while the 25 MHz core performs filtering, calibration, and digital processing. The 64 KB flash capacity provides room for measurement routines and communication stacks, and the 4.25 KB RAM supports sample buffering and working state. A compact 64-pin TQFP package also leaves board area for sensor conditioning and power circuitry. The design must follow the datasheet requirements for analog reference voltage, input ranges, acquisition timing, source impedance, grounding, and PCB layout around sensitive analog signals.
おすすめ
Building Automation Modules
The C8051F045-GQ supports building automation modules that combine local sensing, control, and serial networking. Its 64 KB of flash can hold application logic and communication routines, while the 10-bit ADC is suitable for monitoring analog environmental or occupancy-related signals. The -40 °C to +85 °C operating range covers many indoor equipment environments, while the 3.6 V maximum supply supports integration into low-voltage control boards. A production design should verify exact GPIO availability, communication interfaces, watchdog behavior, brownout handling, and power-sequencing requirements before freezing the schematic.
おすすめ
Motor and Actuator Control
The C8051F045-GQ can serve as the controller in compact motor, valve, and actuator modules where timing, analog feedback, and communication must be combined. Its 25 MIPS execution capability provides a practical operating margin for control tasks, while 64 KB of flash accommodates proprietary algorithms and configuration data. The ADC can monitor current, position, or temperature feedback, and CAN can coordinate commands across a machine. Keep high-current switching stages physically separated from the MCU and analog circuitry, and follow the datasheet recommendations for grounding, supply decoupling, timing-sensitive pins, and thermal management.
おすすめ
CAN-Connected Test and Measurement
The C8051F045-GQ is appropriate for distributed measurement instruments that must gather analog readings and report them through a CAN network. Its 64 KB flash supports moderate test sequences, calibration tables, and communication protocols, while the 10-bit ADC reduces the need for a separate converter in basic instruments. The 25 MHz core can perform digital filtering and produce processed measurements for a host controller. For precision laboratory work, the external ADC may offer better resolution or lower noise. Verify input bandwidth, sample timing, calibration method, reference stability, isolation requirements, and firmware timing against the manufacturer datasheet.
おすすめ
Embedded Communication Gateways
The C8051F045-GQ can act as a local gateway between simple sensors and a CAN-based equipment network. Its 64 KB of flash provides capacity for protocol conversion and device-management logic, while 4.25 KB of RAM supports buffering and state management. The integrated 10-bit ADC permits local analog monitoring without a separate conversion IC in cost-sensitive equipment. The 64-pin TQFP package provides a substantial pin budget for serial interfaces, indicators, and service connectors. Designers should confirm available UART, SPI, and I2C resources, bootloader behavior, reset causes, and peripheral multiplexing in the manufacturer documentation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: C8051F045-GQ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | C8051F047-GQ | C8051F043-GQ | C8051F041-GQ | C8051F065-GQ |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-pin TQFP, 10 mm x 10 mm | 64-pin TQFP - same package family | 64-pin TQFP - same package family | 64-pin TQFP - same package family | 64-pin TQFP - same package family |
| Microcontroller Class | 8-bit mixed-signal MCU | 8-bit mixed-signal MCU | 8-bit C8051F04x MCU | 8-bit C8051F04x MCU | 8-bit C8051F04x MCU |
主な差別化要因
- Largest identified flash capacity in the documented comparison set (vs C8051F047-GQ)
- Higher code and data capacity than the lower-resource family members (vs C8051F043-GQ)
- CAN-enabled 64 KB configuration for networked embedded control (vs C8051F041-GQ)
- Mixed-signal integration reduces external conversion hardware (vs C8051F065-GQ)
設計ノート
Operate the C8051F045-GQ only within its documented 2.7 V to 3.6 V supply range. Place the required bypass capacitors close to the supply and ground pins, keep analog and digital return currents separated where the datasheet recommends it, and provide a stable reference for the ADC. Verify startup, brownout, and regulator sequencing behavior against the manufacturer datasheet because inappropriate supply ramps or an unstable reference can cause unreliable firmware execution and measurement errors.
Use the manufacturer pin-description table and package drawing to assign every signal on the 64-pin TQFP footprint. Keep programming, reset, oscillator, and decoupling networks away from long analog traces, and follow the exposed-pad or thermal-land requirements shown for the exact package. Check pin-1 orientation in the CAD library and assembly documentation. A package-family match is not enough for production; each alternate MPN must undergo a signal-by-signal PCB and firmware review.
Treat the 10-bit ADC section as a mixed-signal design. Use a low-noise reference, appropriate source impedances, controlled trace lengths, and a quiet ground strategy to prevent switching activity from coupling into measurements. Add filtering only after evaluating the acquisition bandwidth required by the application. For CAN communication, follow the transceiver and bus-layout recommendations in the manufacturer interface documentation and keep the MCU supply return path electrically close to its pins.
Do not treat every 64-pin C8051F04x device as a production drop-in replacement. The alternatives can differ in flash, RAM, ADC architecture, peripheral assignments, and pin multiplexing even when their package formats match. Create a substitution matrix covering power, clocks, reset, programming, communications, analog inputs, timers, GPIO, and boot behavior. Rebuild and retest firmware for the selected alternative instead of transferring an existing binary without validation.
コンプライアンス情報
Compliance status must be confirmed for the exact C8051F045-GQ order code through the manufacturer's current product documentation. The -40 °C to +85 °C industrial temperature rating does not by itself establish AEC-Q100 qualification.