C8051F314 - 8KB 8051 MCU 25MHz 32-LQFP | Silicon Labs
部品番号: C8051F314 ✓ 生産中C8051F314 概要
A microcontroller (MCU) is a complete computer-on-a-chip combining a processor core, program memory, data memory, and peripherals into a single integrated circuit. The C8051F314 belongs to the 8-bit MCU class, sits within the broader power-management and embedded-control hierarchy of a system, and is a member of Silicon Labs' C8051F31x family of fully integrated mixed-signal System-on-a-Chip (SoC) MCUs. The pipelined CIP-51 architecture executes most instructions in a single clock cycle, so a 25 MHz C8051F314 substantially outperforms a classic 12-clock-per-cycle 8051 running at the same frequency.
Key features include the 25 MIPS pipelined 8051-compatible core, 8 kB ISP Flash memory that is in-system programmable, 1.25 kB of internal data RAM, on-chip mixed-signal peripherals, and the C2 debug/programming interface that uses just two pins, conserving I/O in small packages. The C8051F31x family offers 24-, 28-, and 32-pin package options with 8 kB or 16 kB Flash variants, enabling pin-compatible upgrades within the footprint.
Architecturally, the CIP-51 core uses a pipelined single-cycle instruction fetch-execute scheme that removes the 12-clock machine-cycle penalty of the original 8051. Flash endurance and ISP capability support field firmware updates. The mixed-signal integration reduces external component count, board area, and bill-of-material cost compared with discrete MCU-plus-peripheral solutions.
Typical applications include industrial control and automation nodes, consumer appliance control, sensor interfaces and smart instrumentation, battery-powered portable equipment, and legacy 8051 designs requiring modern in-circuit-debug capability with a small footprint and low pin count.
When designing with the C8051F314, budget I/O carefully: pin count is the primary constraint of the 32-LQFP, and the C2 interface shares pins with port functions, so plan the debug connector early in the layout.
This page synthesizes verified distributor pricing, drop-in family alternatives, application guidance, and design notes not consolidated in the manufacturer datasheet, providing unique information gain for engineers selecting 8-bit 8051 MCUs.
ドロップイン代替品: C8051F314 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: C8051F314 （同一形状・フットプリント） — 相違点: Package, Flash Memory, Microcontroller Type, Program Memory Type.
C8051F312
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →C8051F313
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →C8051F315
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →C8051F316
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
C8051F317
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
C8051F314 最大定格＆電気的特性
| Core Processor | 8051 (CIP-51 pipelined) |
| Core Size | 8-Bit |
| 最大クロック周波数 | 25 MHz |
| Performance | 25 MIPS |
| Program Memory Type | FLASH |
| Program Memory Size | 8 KB (8K x 8) |
| RAM Size | 1.25 KB |
| Supply Voltage (Vdd) | 2.7 V to 3.6 V |
| パッケージ | 32-LQFP (7x7 mm) |
| Series | C8051F31x |
| Timers | 4 x 16-bit |
| 実装タイプ | Surface Mount |
| Programming Interface | C2 (2-pin debug/ISP) |
| Connectivity | On-chip serial communication interfaces |
| Oscillator Type | Internal oscillator |
| RoHS ステータス | Compliant |
C8051F314 32-lqfp (7x7 mm) ピン配置ガイド
C8051F314 (32-lqfp (7x7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: C8051F314.
詳細は データシート をご参照ください。
主な用途
C8051F314 の用途: 6 件s: Industrial Control and Automation, Sensor Interface and Smart Instrumentation, Battery-Powered Portable Devices, Legacy 8051 System Migration, Consumer Appliance Control, Communication and IoT Edge Nodes.
Industrial Control and Automation
The C8051F314's 25 MIPS pipelined 8051 core provides enough headroom for real-time control loops, sequencing, and communication handling in factory automation nodes, motor control auxiliaries, and PLC I/O modules. Its four 16-bit timers support PWM generation and event capture with microsecond resolution, while on-chip Flash allows in-system firmware updates in installed equipment. The 2.7 V to 3.6 V supply and integrated mixed-signal peripherals reduce board area and component count relative to discrete MCU-plus-logic designs. Placed on a 32-LQFP (7x7 mm) footprint, it fits dense control boards while the C2 debug interface allows field diagnostics without sacrificing I/O pins.
おすすめ
Sensor Interface and Smart Instrumentation
Mixed-signal integration makes the C8051F314 well matched to sensor front-end duties: the on-chip analog resources of the C8051F31x family condition and digitize sensor signals while the 25 MHz core executes filtering and scaling in firmware. Its 2.7 V to 3.6 V single-supply operation matches common 3 V sensor rails, eliminating level-shift circuitry. The 8 kB Flash holds calibration tables and protocol stacks for smart transmitters, panel meters, and data loggers. Because the C2 interface uses only two pins, nearly all 32-LQFP I/O remain available for sensor and communication wiring, an important factor in pin-limited instrumentation boards.
おすすめ
Battery-Powered Portable Devices
The C8051F314's 2.7 V to 3.6 V supply range runs directly from a 3 V lithium coin cell or a single Li-ion cell, and the C8051F31x internal oscillator removes the need for an external crystal, saving board space and standby power. The 25 MIPS core at modest clock rates completes burst tasks quickly, allowing low-duty-cycle firmware profiles that stretch battery life in portable meters, remote controls, and handheld test devices. The 32-LQFP 7x7 mm footprint suits compact enclosures, while 8 kB ISP Flash supports firmware field updates over the two-pin C2 interface without removing the device from the assembly.
おすすめ
Legacy 8051 System Migration
Designers maintaining classic 8051 products benefit from the C8051F314's 8051-compatible instruction set: existing firmware recompiles for the CIP-51 core, which executes most instructions in a single clock cycle, delivering roughly 10-20x the throughput of a 12-clock 8051 at equivalent frequency. According to the C8051F31x datasheet, the family consolidates timers, serial ports, and mixed-signal functions on chip, replacing multi-chip legacy designs with one 32-LQFP device. This makes the part a modernization target for end-of-life 8051 variants such as AT89 and classic Intel-family MCUs where PCB footprint and 3.3 V operation are acceptable.
おすすめ
Consumer Appliance Control
The C8051F314 suits appliance control boards - coffee machines, climate controls, small white goods - where the four 16-bit timers generate PWM for heaters, fans, and indicators, and the 25 MHz core manages user interfaces and communication. Its single 2.7 V to 3.6 V supply simplifies power-tree design from standard 3.3 V rails, and the on-chip mixed-signal peripherals of the C8051F31x family reduce the external component count on cost-sensitive consumer boards. The C2 two-pin debug interface permits in-fixture programming during production, while 8 kB ISP Flash accommodates feature-rich control firmware within the smallest memory tier of the family.
おすすめ
Communication and IoT Edge Nodes
The C8051F314 serves as a compact protocol controller in IoT edge nodes and sub-GHz or wired communication modules: the 25 MIPS core handles packet framing and CRC in firmware, while three I/O ports interface to transceivers. Its on-chip serial peripherals of the C8051F31x family connect to UART-, SPI-, and I2C-based radio and network devices, and the 3 V supply matches typical RF module rails, avoiding level shifting. The 8 kB Flash stores lightweight mesh or point-to-point protocol stacks. The 32-LQFP 7x7 mm package and internal oscillator keep node BOM cost and footprint minimal for high-volume deployments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: C8051F314 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | C8051F312 | C8051F313 | C8051F315 | C8051F316 | C8051F317 |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Core / Speed | 8051 CIP-51, 25 MHz (25 MIPS) | 8051 CIP-51, 25 MHz (25 MIPS) | 8051 CIP-51, 25 MHz (25 MIPS) | 8051 CIP-51, 25 MHz (25 MIPS) | 8051 CIP-51, 25 MHz (25 MIPS) | 8051 CIP-51, 25 MHz (25 MIPS) |
| Flash Memory | 8 KB | 8 KB | 16 KB | 8 KB | 16 KB | 16 KB |
| Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Debug/Programming Interface | C2 (2-pin) | C2 (2-pin) | C2 (2-pin) | C2 (2-pin) | C2 (2-pin) | C2 (2-pin) |
| Lifecycle Status | Active | Active (family) | Active (family) | Active (family) | Active (family) | Active (family) |
主な差別化要因
- Smallest Flash tier with lowest typical cost in family （vs C8051F317)
- Two-pin C2 debug interface conserves I/O （vs C8051F312)
- Pin-compatible in-family upgrade path （vs C8051F316)
設計ノート
Place a 0.1 uF ceramic decoupling capacitor as close as possible to each VDD pin of the 32-LQFP, with an additional 4.7-10 uF bulk capacitor near the device. The 7x7 mm LQFP has 0.8 mm pin pitch, allowing straightforward routing on a two-layer board. Connect C2CK and C2D to a standard 2x2-pin Silicon Labs C2 debug header footprint even in production boards - it costs two pads and enables in-system programming and debugging without full-board rework.
The C8051F314 is a 3 V part: applying 5 V logic signals directly to port pins risks damaging the I/O structures. If interfacing to legacy 5 V TTL systems, add level shifting or series-resistor current limiting per Silicon Labs application notes. Also configure unused port pins as push-pull outputs or enable weak pull-ups via the crossbar, because floating digital inputs on the CIP-51 family increase supply current and can cause spurious interrupts.
Design the power rail for 2.7 V to 3.6 V operation with preference for a clean 3.0 V or 3.3 V LDO output; brown-outs below 2.7 V reset the CIP-51 core. Enable the on-chip voltage monitor / reset features in firmware for safety-critical sequencing. For battery designs, use the internal oscillator at lower clock frequencies where timing margins allow, since dynamic supply current scales with clock frequency per the C8051F31x datasheet power-consumption tables.
The C8051F31x digital crossbar assigns peripherals to port pins under software control; route I/O signals with short, direct traces and keep high-speed serial lines away from the oscillator and analog signals. The internal oscillator removes an external crystal in most applications, but for timing-critical serial protocols verify its accuracy specification in the family datasheet before disabling external crystal options.
コンプライアンス情報
C8051F314-GQ ordering code is RoHS compliant and lead-free per distributor listings (Mouser, LCSC). Obtain formal REACH and material-declaration certificates from the Silicon Labs product page.
