C8051F383-GQ - 50MHz 8-Bit Flash MCU | Silicon Labs
部品番号: C8051F383-GQ ✓ 生産中C8051F383-GQ 概要
A microcontroller is a compact integrated circuit containing a processor core, memory, and dedicated peripherals on one semiconductor device. The C8051F38x family extends the C8051F34x architecture while retaining pin and code compatibility for many existing applications. Within the product hierarchy, the C8051F383-GQ is an 8-bit MCU, a 32-bit-independent embedded controller, and a member of the C8051F38x flash-microcontroller family.
Key device attributes include an 8-bit CISC architecture, up to 50 MHz operating frequency, and 32 KB of flash memory organized as 32K x 8. The manufacturer describes the family as having integrated communication interfaces, making it suitable for systems that need local control alongside serial data exchange. Its 32-LQFP package provides a practical surface-mount footprint for compact but serviceable PCB assemblies.
The Silicon Labs C8051F38x data sheet identifies the family as a pin- and code-compatible replacement for C8051F34x devices in most applications. This compatibility simplifies migration when a design must move from an earlier C8051 generation without changing its board layout or much of its application software. Compatibility should still be checked at the peripheral and electrical level for every migrated design.
Typical uses include USB-connected control equipment, industrial sensor nodes, communication peripherals, compact consumer controls, and embedded automation modules. The flash-based architecture permits field programming and firmware updates, while the high-frequency 8051 core provides useful processing headroom for protocol handling, state machines, and concurrent peripheral tasks.
A critical design consideration is package-level pin planning. Designers should use the pin-description table in the C8051F38x manufacturer datasheet when assigning boot, reset, clock, communication, power, and ground connections. Board layout should also preserve adequate decoupling around every supply pin and route high-current or high-speed signals away from sensitive analog and oscillator circuitry.
This product page combines the exact C8051F383-GQ identity and package information with family-level compatibility guidance, practical design notes, and qualified drop-in alternatives. It is intended to accelerate component selection, PCB reuse, firmware migration, and sourcing decisions for engineers evaluating the C8051F38x platform.
ドロップイン代替品: C8051F383-GQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: C8051F383-GQ (同一形状・フットプリント) — 相違点: Package, Flash Memory, Product Type, RAM, Pin Count.
C8051F384-GQ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →C8051F385-GQ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →C8051F386-GQ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →C8051F387-GQ
✅ ドロップイン価格はお問い合わせください
データシートを見る →C8051F381-GQ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →C8051F383-GQ 最大定格&電気的特性
| Product Type | 8-bit flash microcontroller |
| Processor Core | 8051 CISC |
| 最大クロック周波数 | 50 MHz |
| Maximum Instruction Rate | 48 MIPS |
| Program Memory | 32 KB flash |
| Program Memory Organization | 32K x 8 |
| 動作電源電圧 | 2.5 V / 3.3 V |
| パッケージ | 32-LQFP |
| Package Dimensions | 7 x 7 mm |
| ピン数 | 32 pins |
| 実装タイプ | Surface mount |
C8051F383-GQ 7 x 7 mm ピン配置ガイド
C8051F383-GQ (7 x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: C8051F383-GQ.
詳細は データシート をご参照ください。
主な用途
C8051F383-GQ の用途: 6 件s: USB Control and Connectivity, Industrial Sensor Nodes, Embedded Communication Equipment, Compact Consumer Controls, Automation and Motor-Control Modules, Test and Measurement Instruments.
USB Control and Connectivity
The C8051F383-GQ fits USB-connected control products because it combines a 50 MHz 8051 core with 32 KB of flash and integrated communication interfaces. It can manage enumeration-related state, data transfer, device status, and local control functions while preserving firmware updates through flash memory. The 32-LQFP package is compact enough for desktop accessories, laboratory equipment, and embedded test products. Its main engineering trade-off is the limited 8-bit architecture, which requires efficient interrupt and buffer management when multiple communication tasks compete for CPU time.
おすすめ
Industrial Sensor Nodes
The C8051F383-GQ is suitable for industrial sensor nodes that require local acquisition, communication, and configurable control in a single 8-bit MCU. Its 50 MHz operating frequency provides headroom for polling sensors, filtering data, updating thresholds, and formatting serial messages, while 32 KB of flash supports field-updateable firmware. The 2.5 V and 3.3 V operating references make it useful for embedded monitoring modules. Engineers should provide local decoupling, robust grounding, and input protection for sensors connected through long industrial wiring.
おすすめ
Embedded Communication Equipment
The C8051F383-GQ can serve as the control processor in embedded communication equipment where a compact MCU must handle protocol state, configuration, status reporting, and local user interfaces. Its integrated communication interfaces reduce the need for a separate protocol controller, while the 50 MHz 8051 core supports predictable real-time response. The 32-LQFP package also makes the device suitable for multi-board industrial products. Firmware must still reserve interrupt capacity and memory for buffering because the processor and flash capacity are optimized for control tasks rather than high-throughput data processing.
おすすめ
Compact Consumer Controls
The C8051F383-GQ works well in compact consumer-control products where a low-cost 8-bit controller must manage buttons, indicators, relays, and a serial host interface. Its 32 KB flash provides room for application firmware and configuration tables, while the 50 MHz clock allows responsive debouncing and state-machine updates. The 32-LQFP footprint permits conventional automated assembly and inspection. For products exposed to electrostatic discharge or conducted disturbances, external protection and careful separation of sensitive control inputs from power and switching paths remain essential.
おすすめ
Automation and Motor-Control Modules
The C8051F383-GQ can be used in automation modules that coordinate sensors, digital outputs, communication transceivers, and simple actuators. Its fast 8051 core is effective for executing deterministic control loops and managing multiple peripheral interrupts, and the 32 KB flash supports protocol and motion-sequencing firmware. The device should be placed close to the regulated supply and local bypass capacitors to prevent switching-node noise from disturbing the processor. Motor and relay loads also require external drivers, isolation where appropriate, and protection against back-EMF and inrush current.
おすすめ
Test and Measurement Instruments
The C8051F383-GQ is applicable to compact test and measurement instruments that need sequencing, calibration storage, communication, and real-time control beside analog front-end circuitry. Its 32 KB flash stores instrument firmware and configuration data, while the 50 MHz processor can coordinate measurements, front-panel controls, and host commands. Using separate grounding and power domains for sensitive analog circuitry helps prevent switching and digital activity from degrading measurement accuracy. The 32-LQFP package is also compatible with conventional reflow assembly and machine-inspection practices.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: C8051F383-GQ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | C8051F384-GQ | C8051F385-GQ | C8051F386-GQ | C8051F387-GQ | C8051F381-GQ |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7x7) | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Architecture | 8-bit 8051 CISC | 8051 CISC family | 8051 CISC family | 8051 CISC family | 8-bit 8051 CISC | 8051 CISC family |
| Flash Memory | 32 KB | 32 KB family configuration | 32 KB family configuration | 32 KB family configuration | 32 KB | 32 KB family configuration |
| C8051F34x Migration Compatibility | Pin- and code-compatible in most applications | C8051F38x family migration support | C8051F38x family migration support | C8051F38x family migration support | C8051F38x family migration support | C8051F38x family migration support |
主な差別化要因
- High-frequency 8-bit processing in a 32-LQFP control MCU (vs C8051F381-GQ)
- Directly compared 32 KB flash class (vs C8051F387-GQ)
- Established C8051F34x migration path (vs C8051F384-GQ)
設計ノート
Follow the manufacturer’s 32-LQFP land pattern and pin table exactly, including pin-1 orientation, exposed pad treatment if applicable, and solder-mask clearance. Do not substitute the land pattern of the 32-QFN C8051F383-GM variant. Place the MCU close to its decoupling capacitors and programming header, then reserve a low-impedance ground path between the supply entry point and every ground pin.
Use separate local bypass branches for each supply pin and keep the loop between the capacitor, supply pin, and ground pin as short as practical. The C8051F383-GQ operates in 2.5 V and 3.3 V systems, but the selected regulator still needs adequate transient response for switching peripherals. Check output-voltage tolerance and maximum current in the manufacturer electrical-characteristics table before committing to a power architecture.
Do not assume that every C8051F38x device is interchangeable solely because it uses the same 32-LQFP outline. Pin multiplexing, peripheral availability, interrupt vectors, oscillator requirements, and firmware-generated register definitions can differ. Validate the selected replacement with the C8051F38x datasheet, then review reset behavior and boot configuration against the original schematic before production release.
Keep clock and high-speed communication routing short, away from switching power nodes and relay or motor drive paths. Provide continuous ground references under communication traces where the board stack-up allows, and avoid routing sensitive inputs beside oscillator and high-current return paths. These layout practices are especially important when the MCU controls analog measurement, communication isolation, or precision sensor circuitry on the same assembly.
Programmer compatibility should be confirmed using a toolchain that includes the exact C8051F383 device definition. Check flash write, erase, security, and debug features as well as basic programming. Because the C8051F38x family is code compatible with C8051F34x devices in most applications, existing source may compile without changes while device-specific peripherals still require register-level review.
コンプライアンス情報
AEC-Q100 qualification and operation up to 85 C are stated for the C8051F383-GM package variant, not explicitly for the C8051F383-GQ ordering code. Other compliance attributes are unknown.