C8051F503-IQ - 50MHz 8-Bit MCU with 64KB Flash | Silicon Labs
部品番号: C8051F503-IQ ✓ 生産中C8051F503-IQ 概要
An 8-bit microcontroller is a compact computing platform that combines a CPU core, nonvolatile program memory, data memory, and peripherals in one package. The C8051F50x family belongs to the broader hierarchy of embedded controllers, combining a 8051-compatible core with enhanced mixed-signal conversion. Its integration reduces external component count in industrial control, sensing, communication, and compact automation systems where board space is constrained.
Key features include 50 MIPS execution, 64 KB of flash for firmware, 4 KB of SRAM, a 12-bit analog-to-digital converter, and operating support from 1.8 V through 5.25 V. Serial connectivity includes SPI, UART, and I2C interfaces, allowing the device to connect external sensors, transceivers, memory, and human-interface modules without excessive glue logic.
The C8051F50x architecture is intended for applications that require more performance than a conventional 8-bit core while retaining a simple embedded programming model. Its wide supply range supports both 1.8 V, 2.5 V, and 3.3 V system rails, while the 5.25 V upper limit permits operation from a 5 V source when the power design supports it. The 32-LQFP footprint is also available in smaller packages across the family, supporting board miniaturization.
Typical applications include industrial sensor nodes, compact motor controllers, building-control modules, communications equipment, and low-cost data-acquisition systems. The 12-bit ADC suits measurements such as temperature, pressure, potentiometer position, and analog process signals, while the serial interfaces connect remote sensors and local transceivers.
When designing a board, follow the manufacturer's pin-description table and the recommended decoupling configuration in the C8051F50x datasheet. Place supply capacitors close to the analog and digital power pins, route analog inputs away from fast-switching signals, and confirm the external oscillator and programming-interface requirements for the selected board configuration.
This page consolidates the electrical characteristics, package details, application fit, and practical design considerations for engineers evaluating the C8051F503-IQ. It also provides verified sourcing references and engineering-focused guidance that helps shorten component-selection and board-design work.
ドロップイン代替品: C8051F503-IQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: C8051F503-IQ (同一形状・フットプリント) — 相違点: Package, Flash Program Memory, Processor Core, RAM, Series.
C8051F506-IQ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F560-IQ
✅ ドロップイン価格はお問い合わせください
データシートを見る →C8051F503-IQ 最大定格&電気的特性
| Manufacturer | Silicon Labs |
| Series | C8051F50x |
| CPU Architecture | 8-bit 8051-compatible CISC |
| 最大クロック周波数 | 50 MHz |
| Processing Performance | 50 MIPS |
| Flash Memory | 64 KB (64K x 8) |
| RAM Size | 4 KB |
| ADC Resolution | 12-bit |
| Supply Voltage Range | 1.8 V to 5.25 V |
| Supported Supply Levels | 1.8 V, 2.5 V, 3.3 V, and 5 V |
| Serial Interfaces | SPI, UART, and I2C |
| パッケージ | 32-LQFP (7 x 7 mm) |
| ピン数 | 32 pins |
| 実装タイプ | Surface mount |
| Programmable Flash | Yes |
| Internal Programming | In-system programming |
C8051F503-IQ 32-lqfp (7 x 7 mm) ピン配置ガイド
C8051F503-IQ (32-lqfp (7 x 7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: C8051F503-IQ.
詳細は データシート をご参照ください。
主な用途
C8051F503-IQ の用途: 6 件s: Industrial Sensor and Process Monitoring, Building Automation and HVAC Control, Compact Communications Gateway, Motor Control and Actuator Interface, Battery-Powered Portable Instrument, Digital Control and Counter Interface.
Industrial Sensor and Process Monitoring
The C8051F503-IQ fits compact process-monitoring nodes because its 12-bit ADC samples analog sensor signals while the 50 MHz core performs filtering and control calculations. Its 64 KB of flash accommodates measurement tables, calibration constants, communication routines, and a control loop, while 4 KB of RAM provides working space for sampled values and packet buffers. The 1.8 V to 5.25 V supply range simplifies designs that combine 3.3 V sensor interfaces with lower-voltage digital sections. Connect the analog front end through the device's ADC channels and transmit results through SPI, UART, or I2C.
おすすめ
Building Automation and HVAC Control
The C8051F503-IQ is appropriate for room controllers, HVAC interfaces, and distributed building-control modules that combine sensing with serial communications. The 12-bit ADC supports temperature, humidity, potentiometer, and pressure-signal conditioning, while the 8051-compatible core manages state machines and scheduled control outputs. The 1.8 V to 5.25 V operating range supports mixed-voltage sensor networks and reduces the need for level translation. SPI, UART, and I2C allow the controller to connect to transceivers, display or keypad controllers, and remote modules within a compact wall-mounted enclosure.
おすすめ
Compact Communications Gateway
The C8051F503-IQ can serve as a local protocol-conversion or gateway controller when a product must bridge a sensor bus to a host interface. Its 50 MIPS execution provides enough headroom for framed serial handling, checksum processing, and buffered data transfer, while 64 KB of flash holds protocol state machines and configuration data. The three available serial interfaces allow a board to connect a local sensor or transceiver through SPI or I2C and present the result through UART. Use a logic-level-compatible transceiver when the external link exceeds the MCU's supply range or requires level translation.
おすすめ
Motor Control and Actuator Interface
The C8051F503-IQ can manage low-power actuator, stepper, or small DC motor-control subsystems where deterministic control, analog feedback, and communication must share one device. Its 50 MHz execution supports faster loop calculations than a conventional low-speed 8-bit core, and the 12-bit ADC can measure current, position, or potentiometer feedback. The 4 KB RAM is sufficient for bounded control state and supervisory logic. For transistor drive and protection functions, select external components rated for the motor supply and isolate noisy power paths from the analog input routing.
おすすめ
Battery-Powered Portable Instrument
The C8051F503-IQ suits portable measurement equipment that needs a 12-bit ADC, multiple serial interfaces, and a compact controller without a large external memory. Its 1.8 V minimum operating voltage supports low-energy digital rails, and the 50 MHz core permits responsive filtering or calibration algorithms while the design is operating within its intended duty cycle. The 32-LQFP package simplifies dense portable layouts. Choose the low-power modes and external load switch according to the Silicon Labs power-management guidance, and account for analog-converter and regulator quiescent current in the battery budget.
おすすめ
Digital Control and Counter Interface
The C8051F503-IQ is effective for production-line controllers, counters, sequencers, and programmable logic interfaces where fast I/O handling is needed. At 50 MHz and 50 MIPS, the controller can sample inputs, evaluate sequences, and update outputs with less latency than many low-end 8-bit devices. The 64 KB flash provides room for table-driven sequences and diagnostic routines, and the available serial ports support configuration and logging. Implement input conditioning, isolation, and output-driver protection outside the MCU, then verify timing margins against the worst-case operating condition specified for the selected device variant.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: C8051F503-IQ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | C8051F506-IQ | C8051F560-IQ |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) - same package | 32-LQFP (7 x 7 mm) - same package |
| Series | C8051F50x | C8051F50x | C8051F50x family comparison candidate |
主な差別化要因
- Known 64 KB flash and 4 KB RAM configuration (vs C8051F506-IQ)
- Integrated 12-bit ADC with 50 MIPS execution (vs C8051F560-IQ)
- Broad 1.8 V to 5.25 V supply compatibility (vs C8051F506-IQ)
- Integrated SPI, UART, and I2C connectivity (vs C8051F560-IQ)
設計ノート
Use the manufacturer application circuit as the basis for decoupling and analog grounding. Place the required supply capacitors adjacent to their associated pins, provide a short ground return for analog reference currents, and route analog inputs away from switching-node copper. The 50 MHz execution speed does not require high-speed routing between external components, but the 12-bit converter still needs a quiet reference and stable source impedance. Check each analog network against the C8051F50x datasheet schematic before finalizing component placement.
Select the board supply for both the digital core and the analog section within the 1.8 V to 5.25 V device range. The -IQ ordering code denotes an industrial-temperature configuration, but the exact limits, current consumption, and power-mode behavior must be taken from the C8051F503 datasheet. For battery-powered products, calculate the average and peak current across conversion, serial activity, and idle periods rather than using only the active-mode figure. Confirm regulator dropout, quiescent current, and startup sequencing against the selected operating mode.
Do not treat another C8051F50x member as an automatic firmware-compatible substitution merely because the package matches. Compare flash size, RAM, converter channels, port multiplexing, oscillator options, reset behavior, and programming interfaces with the device comparison tables. The manufacturer states that pin-for-pin compatibility exists across portions of the C8051F50x, C8051F51x, and C8051F58x/59x families, but this family-level statement still requires device-level verification. Preserve the original firmware and boot configuration unless the replacement procedure has been reviewed.
Separate analog and digital return currents in the ground plane and keep the ADC input traces short. Place any external reference or input-conditioning components close enough to the MCU that trace resistance and leakage remain small relative to the required measurement accuracy. For designs with SPI, UART, or I2C activity near the analog section, orient the digital routes away from the analog inputs and place a solid ground reference beneath those inputs where the board stack-up permits it. Validate the final layout for crosstalk with the highest-gain or highest-impedance channel enabled.
コンプライアンス情報
The C8051F50x family is described by Silicon Labs for automotive and industrial use, but a device-specific AEC-Q100 qualification statement, RoHS declaration, REACH declaration, lead-free statement, and conflict-minerals declaration are not present for the C8051F503-IQ. Verify the exact ordering code with the manufacturer before assigning compliance status to a regulated product.