Silicon Labs

C8051F802-GM - 25MHz 8051 MCU, 16KB Flash | Silicon Labs

部品番号: C8051F802-GM ✗ 生産終了
1.8 V to 3.6 V Vdss 20-QFN, 4 x 4 mm Package 25 MHz Speed 16 KB Memory
MOQ: 1 |

C8051F802-GM 概要

The Silicon Labs C8051F802-GM is an 8-bit mixed-signal microcontroller with a 25 MHz 8051 core, 16 KB of Flash program memory, 512 bytes of RAM, and a 10-bit ADC in a 20-QFN package measuring 4 x 4 mm. It operates from 1.8 V to 3.6 V across an operating temperature range of -40°C to +85°C.

An 8051 microcontroller is an embedded-processing device built around a compact, accumulator-based instruction set. It belongs to the broader microcontroller, embedded-processing, and semiconductor hierarchy. This C8051F80x device combines conventional digital control with mixed-signal conversion and capacitive-touch capability, allowing one compact component to handle logic, analog measurement, and touch sensing.

Key features include 16 KB of Flash program memory, 512 bytes of data RAM, 17 general-purpose I/O pins, and a 10-bit analog-to-digital converter. Its 25 MHz operating frequency supports timely execution of control logic, while the 1.8 V to 3.6 V supply range accommodates low-voltage embedded systems. In-System Programming supports firmware configuration and updates through the device programming interface.

The C8051F802-GM belongs to Silicon Labs' mixed-signal C8051F80x family, combining an 8051-compatible core with on-chip analog and touch functions. This integration reduces the need for separate logic devices, ADC packages, and dedicated touch controllers in compact control systems. The 20-QFN footprint also supports dense surface-mount layouts, although its exposed-pad thermal requirements must be considered during PCB design.

Typical uses include capacitive-touch user interfaces, small industrial control modules, digital potentiometer and sensor-signal conditioning, compact consumer controls, and low-voltage embedded instruments. The 10-bit ADC is suitable for monitoring medium-resolution analog quantities such as resistive sensor networks, potentiometer positions, and simple process-voltage inputs.

For PCB implementation, use the manufacturer's pin description and recommended land pattern, connect the exposed pad to the appropriate ground plane, and place decoupling capacitors close to the supply pins. Confirm oscillator, reset, programming, and analog-input requirements against the C8051F80x datasheet before finalizing the schematic and component placement.

This product overview combines the exact device characteristics with practical guidance on analog design, capacitive-touch implementation, power integrity, programming, and package reuse. It also distinguishes the target ordering code from packaging-only variants so engineers can assess board compatibility, firmware requirements, and sourcing options without relying on a basic distributor summary alone.

ドロップイン代替品: C8051F802-GM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

C8051F802-GM 最大定格&電気的特性

Core Processor 8-bit 8051
最大クロック周波数 25 MHz
Flash Memory 16 KB
RAM 512 bytes
ADC Resolution 10 bit
Number of I/O Pins 17 pins
動作電源電圧 1.8 V to 3.6 V
動作温度 -40°C to +85°C
パッケージ 20-QFN, 4 x 4 mm
実装タイプ Surface-mount
Programming Interface In-System Programming
Product Family C8051F80x mixed-signal MCU
データバス幅 8 bit
Capacitive Touch Support Yes
Packaging Type Tube

C8051F802-GM 20-qfn, 4 x 4 mm ピン配置ガイド

C8051F802-GM (20-qfn, 4 x 4 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

C8051F802-GM の 20-qfn, 4 x 4 mm パッケージピン配置図

詳細なピン配置データはありません: C8051F802-GM.

詳細は データシート をご参照ください。

主な用途

C8051F802-GM の用途: 6 件s: Capacitive-Touch User Interfaces, Industrial Sensor Conditioning, Digital Potentiometer and Control, Low-Voltage Embedded Instruments, Battery-Powered Portable Controls, Consumer Appliance Controls.

🧩

Capacitive-Touch User Interfaces

The C8051F802-GM fits compact capacitive-touch panels because it combines 8051-based control logic with dedicated touch capability in a single 20-QFN device. Its 25 MHz maximum clock and 17 I/O pins support responsive button scanning, indicator control, and communication with a host or display. The 16 KB Flash provides room for calibration, filtering, touch configuration, and interface firmware, while the 10-bit ADC supports auxiliary analog measurements. Use the manufacturer touch reference guidance for electrode layout, shielding, sensitivity settings, and production calibration.

🏭

Industrial Sensor Conditioning

The C8051F802-GM is suitable for compact industrial sensing modules that convert analog inputs into digital control decisions. Its 10-bit ADC provides 1024 measurement codes for resistive sensors, potentiometer positions, and basic process signals, and the 8051 core can perform filtering and threshold decisions at up to 25 MHz. Seventeen I/O pins leave useful connections for sensors and actuators. Its 1.8 V to 3.6 V operating range suits compact low-voltage equipment, while the -40°C to +85°C rating supports controlled industrial environments.

⚡

Digital Potentiometer and Control

The C8051F802-GM can replace separate control logic in digital potentiometer, gain-control, and programmable-resistor products. The integrated 10-bit ADC can monitor wiper position or control voltages, while the 8051 core evaluates the result and updates external hardware. Its 25 MHz clock supports responsive control calculations, and 16 KB of Flash accommodates nonvolatile configuration and communication firmware. The 20-QFN footprint reduces board area, making the device suitable for compact instrument panels and low-voltage consumer accessories.

🔧

Low-Voltage Embedded Instruments

The C8051F802-GM supports compact measurement and control instruments requiring modest processing, analog input, and touch adjustment. The 8-bit 8051 core runs at up to 25 MHz, the 10-bit ADC handles basic sensor signals, and 512 bytes of RAM supports localized working data. Its 1.8 V to 3.6 V supply range integrates readily with low-voltage analog and digital sections, while the 4 x 4 mm QFN package preserves board space. Design the analog reference and bypass network according to the manufacturer's recommendations.

📱

Battery-Powered Portable Controls

The C8051F802-GM fits low-voltage portable controls that combine touch input, status LEDs, and limited analog sensing. Its 1.8 V to 3.6 V operating range supports common low-energy system rails, and its 20-QFN package minimizes board area in compact products. The 8051 core can manage debouncing, filtering, and low-rate user-interface tasks, although average power should be evaluated against the complete system sleep strategy. In-System Programming simplifies final configuration and firmware updates during manufacturing.

🏠

Consumer Appliance Controls

The C8051F802-GM can serve as the central controller in compact household or personal-care appliances requiring capacitive buttons and simple analog feedback. Its 25 MHz 8051 core manages user input, operating state, and external switching, while 17 I/O pins connect displays, indicators, and sensors. The 10-bit ADC supports basic supervision of analog signals, and 16 KB of Flash holds appliance firmware. Its 4 x 4 mm QFN package is useful for space-constrained boards, subject to correct exposed-pad thermal layout.

What are the key specifications of C8051F802-GM that engineers should know?
The C8051F802-GM is an 8-bit 8051 mixed-signal microcontroller operating at up to 25 MHz with 16 KB of Flash memory, 512 bytes of RAM, 17 I/O pins, and a 10-bit ADC. According to the Silicon Labs C8051F80x datasheet, it operates from 1.8 V to 3.6 V in a 20-QFN package. Its principal engineering strengths are integrated capacitive-touch support, mixed-signal measurement, and a compact 4 x 4 mm surface-mount footprint.
What is the operating voltage of C8051F802-GM?
The C8051F802-GM operates from 1.8 V to 3.6 V. According to the Silicon Labs C8051F80x datasheet, this range supports low-voltage embedded-control designs using compatible external oscillators and digital peripherals. The supply limits should be observed at the IC pins under maximum clock and load conditions. Decoupling and layout should follow the datasheet recommendations to maintain stable operation across the complete voltage range.
Is C8051F802-GM suitable for capacitive-touch applications?
Yes, the C8051F802-GM is suitable for capacitive-touch user interfaces because its mixed-signal C8051F80x architecture includes capacitive-touch capability. It combines a 25 MHz 8051 core, a 10-bit ADC, 17 I/O pins, and 16 KB of Flash in one 20-QFN device. The touch implementation still requires correct electrode geometry, shielding, calibration, and firmware configuration based on the manufacturer's reference guidance.
Where can I download the C8051F802-GM datasheet PDF?
The C8051F802-GM datasheet is accessible through the linked datasheet record, which points to the Silicon Labs C8051F802 documentation. The document is identified as covering the mixed-signal ISP Flash MCU family and contains the electrical characteristics, pin information, package drawings, and programming details needed for design review. Use the manufacturer's pin-description table and recommended land pattern when laying out the 20-QFN footprint.
Where can I find the C8051F802-GM pinout?
The authoritative C8051F802-GM pinout is in the pin-description table of the Silicon Labs C8051F80x datasheet. The device uses a 20-pin QFN package with 17 I/O pins, a 10-bit ADC, power connections, programming signals, reset, clocking, and an exposed thermal pad. Assign PCB tracks by following the manufacturer numbering, ground-pad connection, and recommended footprint rather than inferring functions from a generic QFN drawing.
How much Flash memory and RAM does C8051F802-GM have?
The C8051F802-GM contains 16 KB of Flash program memory and 512 bytes of data RAM. According to the Silicon Labs C8051F80x datasheet, the Flash supports In-System Programming for device configuration. The memory capacity suits compact touch controllers, sensing nodes, and embedded-control firmware where code size must remain moderate and frequent external memory access should be avoided.
Can C8051F802-GM replace C8051F802-GMR on an existing PCB?
The C8051F802-GMR is a packaging variant of the C8051F802 device, but the ordering-code suffix must be checked against the required delivery format. The technical listing identifies both as 20-QFN, 25 MHz, 16 KB devices. Because the target C8051F802-GM is supplied in a tube while the GMR code denotes a tape-and-reel ordering option, board compatibility depends on the assembly process rather than electrical pin compatibility.
What can replace C8051F802-GM as a drop-in replacement?
No verified drop-in replacement for the C8051F802-GM is established by the manufacturer documentation or cross-reference records reviewed for this product. A replacement must match the 20-QFN footprint, pin functions, 1.8 V to 3.6 V supply range, 25 MHz class of performance, memory resources, and programming behavior. Use the Request a Quote form on this page to request a current replacement assessment rather than substituting a microcontroller based only on core type or package count.
Is C8051F802-GM the same as C8051T635-GM?
No. The C8051F802-GM and C8051T635-GM are related 25 MHz, 8-bit Silicon Labs devices, but product-family, peripheral, memory, and software differences can make a direct substitution unsafe. The C8051F802-GM is specified with 16 KB Flash, 512 bytes of RAM, a 10-bit ADC, and 20-QFN packaging. Confirm pin assignments and firmware requirements in the manufacturer documentation before considering the T635 for a new design.
C8051F802-GM vs C8051T635-GM: which is better for a capacitive-touch controller?
The C8051F802-GM is the more direct choice when its specified capacitive-touch and mixed-signal features match the intended circuit. It is an 8-bit 8051 device with a 25 MHz maximum clock, 16 KB Flash, 512 bytes of RAM, and a 10-bit ADC in a 20-QFN package. The C8051T635-GM may provide alternative touch-channel or peripheral resources, but its pin map and touch architecture must be compared before making a board-level replacement.
When should I choose C8051F802-GM instead of a larger 8-bit MCU?
Choose the C8051F802-GM when the design needs a compact 8051-based controller with integrated capacitive-touch and analog functions rather than a larger general-purpose MCU. Its 16 KB Flash, 512 bytes of RAM, 17 I/O pins, 25 MHz maximum clock, and 20-QFN footprint can simplify compact touch panels and sensing nodes. Select a larger device only when the application requires more memory, I/O, storage, or specialized peripherals.
Is C8051F802-GM suitable for industrial sensing and control?
The C8051F802-GM is suitable for compact sensing and control designs operating from 1.8 V to 3.6 V, provided the application remains within its -40°C to +85°C rating. Its 10-bit ADC provides 1024 digital codes for basic analog measurements, while the 17 I/O pins support sensors, indicators, and control signals. Validate analog accuracy, noise behavior, timing, and thermal margins for each production design.
Where can I buy C8051F802-GM online?
Use the Request a Quote form on this page to request C8051F802-GM availability, obsolete-part sourcing, and order handling. The requested configuration is a 20-QFN, 4 x 4 mm device with 16 KB Flash, 512 bytes of RAM, a 10-bit ADC, and a 25 MHz maximum clock. Include the required tube quantity, target quantity, date code requirements, and any traceable-condition needs with the request.
What is the price of C8051F802-GM?
Use the Request a Quote form on this page for the current C8051F802-GM price and obsolete-part sourcing options. The request should identify the exact 25 MHz, 16 KB Flash, 512-byte-RAM, 20-QFN device and clarify the required tube quantity. Quote requests allow current market conditions, quantity breaks, condition requirements, and expected delivery timing to be considered before an order is placed.
What is the lead time and stock status for C8051F802-GM?
Request current stock status, lead time, and minimum order quantity through the Request a Quote form on this page. Because C8051F802-GM is an obsolete catalog device, confirmation should include the required quantity, tube packaging, date-code preference, and acceptable traceable condition. The target device is a 20-QFN, 4 x 4 mm 8051 MCU with a 1.8 V to 3.6 V supply range.

エンジニアリング参考データ: C8051F802-GM — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the C8051F802-GM when a design specifically benefits from an obsolete but defined 8-bit 8051 mixed-signal platform with 16 KB of Flash, 512 bytes of RAM, a 10-bit ADC, capacitive-touch support, and a compact 20-QFN footprint. Its 25 MHz maximum clock and 1.8 V to 3.6 V supply range are appropriate for low-voltage embedded-control, touch-interface, and basic analog-sensing products. C8051F802-GMR may be relevant when the same electrical device is required in tape-and-reel rather than tube format. C8051T635-GM should not be treated as a direct substitute without checking its pin map, peripheral set, memory map, programming procedure, and firmware support. For a new design, verify the product lifecycle and long-term sourcing requirements before committing the PCB architecture.

代替品との比較

パラメータ この製品
Core Processor 8-bit 8051
Maximum Clock Frequency 25 MHz
Flash Memory 16 KB
RAM 512 bytes
ADC Resolution 10 bit
I/O Count 17 pins
Operating Supply Voltage 1.8 V to 3.6 V
Operating Temperature -40°C to +85°C
Package 20-QFN (4 x 4 mm)
Brand Silicon Labs
Capacitive Touch Supported
Programming In-System Programming

設計ノート

Use the manufacturer land pattern for the 20-QFN, 4 x 4 mm package and connect the exposed pad to the appropriate ground-plane structure. Place input and output decoupling capacitors close to their associated supply pins, with the shortest practical return paths. Preserve the exposed-pad solder area without accidental paste stencil voids, and follow the package drawing for the terminal-pitch, pad-length, and solder-mask details.

Treat analog inputs and touch-sensing electrodes as sensitive nodes. Keep them away from switching-power nodes and high-current return paths, use short traces, and provide a stable ground reference beneath the analog circuitry. Program the ADC and touch subsystem from the Silicon Labs C8051F80x guidance, validate noise with the intended source impedance, and include calibration data if production accuracy depends on touch-electrode or sensor tolerances.

Do not treat every 20-pin 8051 microcontroller as an interchangeable replacement. Check the exact pin functions, exposed-pad connection, reset behavior, oscillator requirements, programming interface, ADC channels, and supply sequencing in the manufacturer pin description. Also confirm that replacement firmware accounts for peripheral-register differences. A matching package and 25 MHz clock rate alone are insufficient to establish drop-in compatibility.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance declarations were not identified for the exact C8051F802-GM ordering code. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with Silicon Labs for the selected lot before production release.

データ検証日: 2026-11-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

C8051F802-GM datasheet C8051F802-GM pinout C8051F802-GM datasheet pdf C8051F802-GM equivalent C8051F802-GM replacement C8051F802-GM schematic C8051F802-GM footprint C8051F802-GM price C8051F802-GM stock Silicon Labs C8051F802-GM C8051F802 20-QFN pinout C8051F802 capacitive touch MCU

関連部品&用語

Silicon Labs C8051F802-GM C8051F802 C8051F80x 8051 microcontroller 8-bit microcontroller mixed-signal MCU embedded controller semiconductor capacitive touch 10-bit ADC In-System Programming Flash memory RAM QFN-20 surface-mount package industrial sensing consumer appliance control
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示