C8051F835-GS - 25MHz 8-Bit Mixed-Signal MCU, SOIC-16
部品番号: C8051F835-GS ✗ 生産終了C8051F835-GS 概要
A mixed-signal 8-bit microcontroller is an embedded-control IC that combines a digital processor with analog and timing functions on one die. This integration places sensing, control, and communication-related peripherals close to the processor, helping reduce component count and simplify board design. The C8051F83x family belongs to the broader hierarchy of 8-bit MCU, embedded processor, embedded controller, and semiconductor product categories.
The C8051F835-GS is particularly relevant to capacitive-touch and compact analog-control designs. Its documented feature set includes an ADC, a DAC, one comparator, and an on-chip temperature sensor. These resources can support touch sensing, local threshold detection, low-resolution signal generation, and temperature compensation without requiring every function to be implemented as a separate external component.
At 25 MHz, the processor provides substantially more timing headroom than basic low-rate control loops while retaining the simplicity associated with an 8-bit architecture. Program storage is provided by 4 KB of Flash, allowing firmware, configuration data, and application logic to be placed in reprogrammable nonvolatile memory. The 16-SOIC format also offers a smaller footprint than many larger leaded or high-pin-count MCU packages.
Typical applications include capacitive-touch user interfaces, compact industrial control modules, temperature-monitoring instruments, consumer appliances, and embedded products that combine digital control with limited analog processing. Designers can use the ADC and comparator for front-end measurements, the DAC for basic analog output, and the internal temperature sensor when calibrated system behavior around local thermal conditions.
PCB planning should prioritize the 16-SOIC footprint, exposed ground and supply connections, and the placement of analog input and reference circuitry required by the selected peripheral functions. Because the analog resources are integrated, bypassing, grounding, and signal-routing practices can materially affect measurement repeatability and touch-channel performance.
This product page consolidates the core device identity, package information, technical specifications, application guidance, replacement considerations, and engineering design notes. It also distinguishes exact replacements from parts that share a footprint but require firmware, peripheral, or timing review before substitution is approved.
ドロップイン代替品: C8051F835-GS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
C8051F805-GS
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F832-GS
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F806-GS
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
C8051F830-GS
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
C8051F831-GS
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
C8051F835-GS 最大定格&電気的特性
| Manufacturer | Silicon Labs |
| Product Type | 8-bit mixed-signal flash microcontroller |
| Processor Core | 8051-compatible 8-bit core |
| 最大クロック周波数 | 25 MHz |
| Flash Memory | 4 KB |
| Flash Organization | 4K x 8 |
| RAM | 256 B |
| ADC | Integrated ADC |
| DAC | Integrated DAC |
| Comparator Count | 1 |
| Temperature Sensor | Integrated on-chip temperature sensor |
| Capacitive Touch | Supported |
| Programming Interface | In-system programming (ISP) |
| パッケージ | 16-pin SOIC |
| 実装タイプ | Surface mount |
| RoHS ステータス | unknown |
| REACH Status | unknown |
C8051F835-GS 16-pin soic ピン配置ガイド
C8051F835-GS (16-pin soic パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: C8051F835-GS.
詳細は データシート をご参照ください。
主な用途
C8051F835-GS の用途: 6 件s: Capacitive-Touch User Interfaces, Temperature-Monitoring Instruments, Compact Industrial Control Modules, Consumer Appliance Controls, Low-Resolution Analog Signal Generation, Embedded Measurement and Threshold Control.
Capacitive-Touch User Interfaces
The C8051F835-GS fits capacitive-touch interfaces because it combines a 25 MHz 8051-compatible processor with dedicated capacitive-touch capability in a compact 16-SOIC package. The processor can coordinate electrode scanning, filtering, debounce logic, and control responses while the integrated analog and timing resources reduce the need for separate sensing components. This helps designers create compact panels, appliance controls, and handheld products without allocating a larger mixed-signal package. The final touch performance still depends on sensor geometry, guard structures, acquisition timing, and calibration, so prototype the electrode layout with the intended PCB stack-up rather than treating digital processing alone as sufficient.
おすすめ
Temperature-Monitoring Instruments
The C8051F835-GS is suitable for compact temperature-monitoring equipment because it integrates an on-chip temperature sensor with a 25 MHz control core, 4 KB of Flash, and an ADC. The internal sensor can provide a local thermal reading for display, threshold control, fan activation, or product compensation, while the ADC can accept an external sensor when higher accuracy or a wider measurement range is required. Its 8-bit architecture simplifies embedded control and reduces software overhead for basic threshold logic. Calibration is still important because offset, gain, and temperature-dependent behavior depend on the device and application, and the enclosure or heat-spreading structure should be considered when the internal sensor must track an external environment accurately.
おすすめ
Compact Industrial Control Modules
The C8051F835-GS can form the core of a compact industrial control module that combines sensor acquisition, local decision-making, and actuator control. Its 25 MHz clock provides useful timing margin for scanning, filtering, communications, and state-machine updates, while 4 KB of Flash stores application firmware and configuration. The integrated ADC, DAC, comparator, and temperature sensor make the device appropriate for modules that monitor several analog conditions without excessive component count. The 16-pin SOIC package also supports compact, cost-conscious control boards. Industrial deployments should still verify operating-temperature limits, supply tolerance, isolation requirements, and output-drive capabilities before using the MCU directly with long cables, high-voltage nodes, or noisy industrial environments.
おすすめ
Consumer Appliance Controls
おすすめ
Low-Resolution Analog Signal Generation
The C8051F835-GS can generate controlled low-resolution analog signals through its integrated DAC while using the same package for measurement, logic, and system control. This consolidation is useful in test fixtures, simple set-point generators, calibration equipment, and embedded products that require a modest analog output alongside digital logic. The 25 MHz processor can update control states and calculate output values, and the ADC can provide a feedback path when a closed-loop relationship is required. Practical results depend on DAC resolution, output range, settling behavior, reference quality, and the load connected to the output. Add the required output buffering or filtering where the load would otherwise distort or load the DAC.
おすすめ
Embedded Measurement and Threshold Control
The C8051F835-GS is appropriate for measurement products that combine an ADC with a comparator and an 8-bit control processor. The ADC can digitize a conditioned analog input for numeric measurement, while the comparator can support a fast threshold or window decision without waiting for a periodic software conversion. The 25 MHz operating rate leaves execution capacity for filtering, calibration, display updates, and communications, and 4 KB of Flash supports compact firmware. This division of functions can reduce system complexity in alarms, process indicators, portable meters, and simple condition-monitoring devices. Input protection, reference stability, source impedance, grounding, and software calibration should be evaluated together because measurement accuracy depends on the complete analog signal path, not only on converter resolution.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: C8051F835-GS — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | C8051F805-GS | C8051F832-GS | C8051F806-GS | C8051F830-GS | C8051F831-GS |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Product Type | 8-bit mixed-signal flash microcontroller | 8-bit flash microcontroller | 8-bit mixed-signal microcontroller | 8-bit flash microcontroller | 8-bit mixed-signal microcontroller | 8-bit mixed-signal microcontroller |
主な差別化要因
- Integrated mixed-signal resources (vs C8051F805-GS)
- Dedicated capacitive-touch support in a 16-pin package (vs C8051F830-GS)
- Mixed-signal integration for compact control products (vs C8051F831-GS)
設計ノート
Use the exact 16-pin SOIC land pattern and follow the C8051F80x/83x datasheet layout guidance. Place decoupling capacitors immediately adjacent to the relevant supply and ground pins, connect the ground reference with minimal return-path discontinuity, and avoid routing sensitive analog inputs beneath or parallel to digital programming and switching signals. Verify the exact pin names against the ordering code before releasing artwork.
Treat the ADC, DAC, comparator, and on-chip temperature sensor as one analog subsystem. Keep external sensor traces short, use a stable reference arrangement, and isolate analog ground connections from high-current return paths where the device and board architecture permit. For capacitive-touch inputs, preserve the recommended sensor and guard geometry and minimize contamination from moisture, flux residue, and nearby switching nodes.
A shared SOIC footprint does not make every C8051F83x device interchangeable. Before substituting a part, compare supply voltage, clock source, Flash and RAM requirements, ADC channels, DAC availability, comparator routing, touch channels, port multiplexing, interrupt vectors, and oscillator pins. Existing firmware may also depend on device-specific registers, so perform source, timing, and hardware regression tests rather than relying on package appearance alone.
Confirm the exact supply range, power consumption, and port-drive limits from the C8051F80x/83x electrical-characteristics tables before finalizing the power architecture. Use local bulk and high-frequency bypassing as specified, maintain adequate voltage at the pins during startup and peripheral operation, and avoid powering external loads directly from a port unless its current and temperature limits are explicitly satisfied.
コンプライアンス情報
The device is an industrial and commercial microcontroller rather than an automotive-qualified AEC-Q100 device. Specific RoHS, REACH, lead-free, and halogen-free declarations are not stated in the referenced product material.