CS8421-DZZ 32-Bit 192 kHz Audio SRC | Cirrus Logic
部品番号: CS8421-DZZ ✗ 生産終了CS8421-DZZ 概要
An asynchronous sample-rate converter is an audio interface device that accepts an input signal associated with one clock frequency and resamples it to a different output clock. It sits within the audio signal-chain hierarchy as a sample-rate converter, clock-domain interface, audio interface IC, and ultimately an analog-and-mixed-signal semiconductor. This makes it useful where a source device, digital audio processor, DAC, or network playback engine does not share a common master clock.
Key characteristics of the CS8421-DZZ include 32-bit processing, a maximum sample rate of 192 kHz, stereo two-channel capability, and an asynchronous conversion architecture. Its stated dynamic range of 175 dB and THD+N of -140 dB make it appropriate for professional studio equipment, high-end consumer audio, digital mixers, broadcast infrastructure, and clock-domain isolation between digital audio sources. The 20-lead TSSOP package also permits reuse of TSSOP-20 board layouts where the surrounding circuitry satisfies the interface and grounding requirements.
The CS8421-DZZ is identified by Cirrus Logic as discontinued. The family is also offered in a 20-pin QFN package, but that package option is not pin-compatible with the leaded CS8421-DZZ and therefore is not a drop-in substitution. Existing designs should check supply availability and consider a functionally similar asynchronous converter only after verifying digital interface timing, master-clock requirements, control logic, voltage levels, and package dimensions.
When laying out a board, route the audio data and clock signals away from switching-node and high-current supply traces, provide solid ground-plane return paths, and decouple the 2.5 V core rail close to the device. Differential data signals should be length-matched within the limits stated in the manufacturer datasheet, and unused interface pins should be configured according to the device pin-description table rather than left floating by assumption.
This page consolidates lifecycle information, verified package and operating details, application guidance, and drop-in replacement analysis. It also documents the key engineering constraints engineers must check before reusing a CS8421-DZZ design or selecting a replacement: exact pinout, master-clock topology, audio word length, sample-rate range, control-register behavior, power sequencing, and board-level isolation.
ドロップイン代替品: CS8421-DZZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストCS8421-DZZ 最大定格&電気的特性
| Product Type | Asynchronous stereo audio sample-rate converter |
| Bit Depth | 32 bit |
| Maximum Sample Rate | 192 kHz |
| Channel Count | 2 channels |
| Conversion Architecture | Asynchronous |
| Dynamic Range | 175 dB |
| THD+N | -140 dB |
| Core Supply Voltage Range | 2.38 V to 2.62 V |
| 動作温度範囲 | -40°C to +85°C |
| パッケージ | 20-pin TSSOP |
| 実装タイプ | Surface mount |
| カテゴリ | Audio Special Purpose IC |
| RoHS ステータス | RoHS |
| ライフサイクル状態 | Discontinued |
CS8421-DZZ 20-pin tssop ピン配置ガイド
CS8421-DZZ (20-pin tssop パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: CS8421-DZZ.
詳細は データシート をご参照ください。
主な用途
CS8421-DZZ の用途: 6 件s: Professional Audio Clock-Domain Conversion, High-Resolution Consumer Audio, Digital Mixing Console Audio Routing, Broadcast and Studio Monitoring, Digital Audio Interface Isolation, Digital Audio Test and Measurement.
Professional Audio Clock-Domain Conversion
The CS8421-DZZ fits between professional digital audio sources and processing blocks that operate from independent clocks. Its 32-bit asynchronous conversion capability and 192 kHz maximum rate support high-resolution studio pathways, while the stated 175 dB dynamic range and -140 dB THD+N help preserve program material during rate conversion. The converter is placed directly at the boundary between the source interface and the destination audio engine, with the source clock and destination clock arriving from separate low-jitter domains. Because the device is discontinued, it is most appropriate for sustaining existing professional equipment rather than new platform creation.
おすすめ
High-Resolution Consumer Audio
In a high-resolution network player or premium digital-to-analog path, the CS8421-DZZ can isolate a source transport clock from the DAC clock domain. Its 32-bit architecture supports detailed digital audio handling up to 192 kHz, and the -140 dB THD+N specification supports designs where conversion artifacts should remain well below the audible noise floor. Place the converter before the DAC input stage and keep data and clock routing short. Confirm that the selected DAC accepts the converter's supported data format and verify master-clock configuration against the manufacturer documentation.
おすすめ
Digital Mixing Console Audio Routing
The CS8421-DZZ is applicable in digital mixers and broadcast routers where incoming production streams use sample rates or clock phases that differ from the console's internal processing domain. The two-channel, 192 kHz-capable converter provides a transparent boundary between those clock domains without forcing one device to master the other. Designers should budget for deterministic latency, enable or bypass behavior, and supported digital audio formats in the control software. Low-jitter clock distribution and isolated return paths are essential because converter performance cannot compensate for unstable source clocks.
おすすめ
Broadcast and Studio Monitoring
Broadcast facilities often combine sources running at different clock rates before monitoring or recording. The CS8421-DZZ can serve as the stereo asynchronous conversion stage between such a source and a studio monitoring path. Its 175 dB dynamic range and -140 dB THD+N figures are useful when maintaining low-noise, high-fidelity monitoring signals, while the 20-pin TSSOP package supports conventional surface-mount assembly. Check the device's supported sample rates and interface formats against every signal source, and validate audible monitoring behavior during format changes and asynchronous startup.
おすすめ
Digital Audio Interface Isolation
The CS8421-DZZ can be used as an isolation element between digital audio devices whose master clocks are unrelated, such as a transport interface feeding a separate decoder or recording subsystem. Asynchronous conversion removes the need for a shared master clock across the boundary and supports operation up to 192 kHz. Place the device near the receiving interface when possible, maintain a continuous ground reference, and keep clock traces away from noisy power-converter nodes. Firmware must also account for conversion latency when aligning playback position or synchronizing recorded streams.
おすすめ
Digital Audio Test and Measurement
The CS8421-DZZ is suitable for audio laboratory equipment that must evaluate streams captured at one rate and replay them under a different clock. Its 32-bit processing and 192 kHz capability support high-resolution test vectors, while the documented dynamic range and THD+N provide a transparent conversion path for measurement. Use independent, low-jitter clocks for the source and destination to avoid hiding clock problems in the converter. Because the part is end-of-life, instrument builders should also assess whether a currently supported asynchronous converter offers a lower procurement risk for new platforms.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: CS8421-DZZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Product Type | Asynchronous stereo audio sample-rate converter |
| Brand | Cirrus Logic |
| Package | 20-pin TSSOP |
| Bit Depth | 32 bit |
| Maximum Sample Rate | 192 kHz |
| Channel Count | 2 channels |
| Core Supply Voltage | 2.38 V to 2.62 V |
| Dynamic Range | 175 dB |
| THD+N | -140 dB |
| Operating Temperature | -40°C to +85°C |
| Lifecycle Status | Discontinued |
| RoHS Status | RoHS |
主な差別化要因
- High-resolution asynchronous conversion (vs CS8421 QFN package option)
- Transparent stereo performance (vs CS8421 QFN package option)
- Single 2.5 V core architecture (vs CS8421 QFN package option)
設計ノート
Keep the audio data and clock nets short, continuous, and referenced to a solid ground plane. Route the clocks away from switching converters, relay drivers, and high-current output paths because asynchronous conversion performance depends on stable edge timing. Where the interface is differential, match the pair geometry and length as closely as practical, and avoid stubs or test-pad branches that create reflections.
Decouple the nominal 2.5 V core rail at the device with the capacitance and placement specified in the manufacturer datasheet. Keep the high-frequency capacitor return path directly into the ground plane rather than routing it around the package. Verify the logic-level supply used by the audio interface separately from the core rail, and confirm power-up ordering so the interface drivers do not see an out-of-range voltage.
Do not substitute the CS8421 QFN option for the CS8421-DZZ on an existing board. Although both belong to the same converter family, their package footprints and pin arrangements differ. Before approving any proposed replacement, compare the complete 20-pin mapping, master-clock architecture, supported sample rates, data format, control registers, and audio latency against the original design.
Treat source and destination clocks as independent high-quality references rather than deriving one from a noisy system clock. Use the lowest-jitter clock sources available and confirm that clock ratios and supported rate combinations remain valid for every operating mode. Account for converter latency in system synchronization, and test asynchronous start, stop, format change, and bypass transitions in the finished enclosure.
コンプライアンス情報
The JLCPCB product listing identifies the CS8421-DZZ as RoHS. No qualifying information was identified for REACH, AEC-Q100, halogen-free status, or conflict-mineral declarations.