CY8C22213-24SI - 8-Bit 24MHz 2KB Flash MCU | Infineon
部品番号: CY8C22213-24SI ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.2333 | $2.23 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
CY8C22213-24SI 概要
A microcontroller is a programmable integrated circuit that contains a processor core, memory, and peripheral functions on one semiconductor die. In the broader device hierarchy, this MCU is an embedded processor and mixed-signal controller rather than a general-purpose desktop processor. PSoC 1 devices combine digital control with configurable analog and digital peripheral blocks, allowing compact designs to include sensing, control, and communication functions without relying on a large external component count.
The CY8C22213-24SI is identified in the verified data as part of the CY8C22xxx PSoC 1 family and as an application processor. Its key verified attributes are 8-bit processing, 24 MHz maximum frequency, 2 KB flash, and a 20-SOIC package. The 20-SOIC outline is suitable for conventional surface-mount PCB assembly, while the limited flash capacity makes the device most appropriate for compact control tasks rather than storage-heavy firmware.
Typical design roles include sensor conditioning and signal acquisition, industrial control, keypad and user-interface scanning, simple motor or actuator sequencing, and low-cost embedded products. The mixed-signal architecture can simplify boards that need both digital state control and analog functions. Exact pin functions, electrical limits, ADC resources, timers, and programming details were not supplied in the verified excerpts, so they should be confirmed against the manufacturer datasheet before schematic capture or firmware deployment.
Designers should verify the exact clock, power, reset, I/O, and analog specifications from the official CY8C22213-24SI documentation. Because the retrieved snippets provide distributor and search metadata rather than a complete manufacturer specification table, unverified values are not inferred here. Confirm package dimensions, pin assignment, supply limits, operating temperature, memory map, and programming-tool support with the manufacturer documentation and the current distributor data.
ドロップイン代替品: CY8C22213-24SI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: CY8C22213-24SI （同一形状・フットプリント） — 相違点: Flash Memory, Package, Operating Frequency, Package Width, Processor Architecture.
クイック比較ツール — 並列比較する代替部品を選択:
CY8C24223-24SI
✅ ドロップイン✓ 在庫あり
$4.93 / 個
データシートを見る →CY8C22213-24SI
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →CY8C22213-24SI 最大定格＆電気的特性
| Device Type | 8-bit mixed-signal microcontroller |
| Product Family | PSoC 1 CY8C22xxx |
| 最大クロック周波数 | 24 MHz |
| Flash Memory | 2 KB (2K x 8) |
| Processor Architecture | 8-bit |
| パッケージ | 20-SOIC (0.295 inch, 7.50 mm width) |
| Package Type | 20-pin SOIC |
| 実装タイプ | Surface mount |
| Manufacturer Category | PSoC mixed-signal array |
| Core Function | Embedded controller and application processor |
| Program Memory Type | Flash |
| Memory Organization | 2K x 8 bits |
| Package Width | 7.50 mm |
| Operating Frequency | 24 MHz maximum |
| ピン数 | 20 pins |
| RoHS ステータス | unknown |
| REACH Status | unknown |
CY8C22213-24SI 7.50 mm ピン配置ガイド
CY8C22213-24SI (7.50 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: CY8C22213-24SI.
詳細は データシート をご参照ください。
主な用途
CY8C22213-24SI の用途: 6 件s: Compact Sensor Control, Industrial Keypad Interface, Small Motor Sequencing, Simple Signal Acquisition, Low-Cost Communication Node, Embedded Accessory Controller.
Compact Sensor Control
The CY8C22213-24SI is suitable for compact sensor-control products that need an 8-bit embedded controller and mixed-signal PSoC resources in one package. Its verified 24 MHz maximum clock provides a defined processing point, while the 2 KB flash capacity favors small control firmware. Use the device when the design can be supported by the available memory and when the exact analog resources and pin assignments are confirmed in the manufacturer datasheet. The SOIC package supports conventional surface-mount assembly, but grounding, signal integrity, and exposed analog layout remain important.
おすすめ
Industrial Keypad Interface
The CY8C22213-24SI can serve as the central controller in a small keypad or operator-interface module because the verified data identifies an 8-bit controller with 24 MHz maximum frequency. The 20-SOIC package provides a manageable pin count for scan inputs, indicator outputs, and communications, subject to the verified datasheet pinout. Firmware must remain within the 2 KB flash allocation, and debounce, scanning rate, and ESD protection should be handled in the surrounding hardware and software. Exact I/O capabilities are not specified in the supplied excerpts.
おすすめ
Small Motor Sequencing
For basic actuator sequencing, the CY8C22213-24SI can manage state transitions, interlocks, timing, and fault handling in a compact embedded controller. Its verified 24 MHz maximum clock is more than a simple state-machine controller needs for many low-speed sequencing tasks, while the 2 KB flash limits the complexity of stored program logic. External driver transistors, protection components, and a suitable power rail are still required because the supplied data does not identify motor-driver outputs or current ratings. Use the manufacturer pinout to confirm timer and output availability.
おすすめ
Simple Signal Acquisition
The PSoC 1 mixed-signal classification makes CY8C22213-24SI a candidate for small signal-acquisition modules where sensing and control share one controller. The verified excerpts do not specify ADC resolution, analog input count, sample rate, or comparator resources, so the device should be selected only after those parameters are confirmed. Firmware can perform filtering and threshold decisions within the 2 KB flash budget, while analog front-end conditioning and external protection determine the usable input range. Verify the complete analog electrical specification in the official datasheet.
おすすめ
Low-Cost Communication Node
CY8C22213-24SI can be used in a compact communications or control node where the product is organized around an 8-bit embedded controller rather than a high-throughput processor. The verified 24 MHz maximum frequency supports common low-speed control tasks, and the 2 KB flash capacity supports a compact firmware image. The retrieved data does not identify specific serial interfaces or protocol accelerators, so interface selection must be confirmed. Choose supporting transceivers only after checking voltage levels, timing, and the device's verified pin assignments.
おすすめ
Embedded Accessory Controller
The CY8C22213-24SI is appropriate for compact accessories that coordinate buttons, indicators, sensors, and a simple user interface. Its 8-bit architecture and 2 KB flash favor small deterministic control loops, while the 20-SOIC package can simplify assembly compared with a very small complex package. Designers should budget flash for bootloader or update requirements, verify brownout and reset behavior, and confirm whether the intended peripheral resources are present. The verified distributor data does not provide a complete peripheral list, so preliminary use should be followed by datasheet review.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: CY8C22213-24SI — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | CY8C24223-24SI | CY8C22213-24SI |
|---|---|---|---|
| Package | 20-SOIC | 20-SOIC; verified comparison page title only | 20-SOIC; identical listing |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package Pin Count | 20 pins | 20 pins indicated by 20-SOIC designation | 20 pins indicated by 20-SOIC designation |
主な差別化要因
- Verified PSoC mixed-signal positioning （vs ATTINY2313-20SU)
- Confirmed 20-SOIC package （vs ATTINY24-20SSU)
- Documented 2 KB flash configuration （vs ATTINY2313-20SU)
設計ノート
Do not treat the 20-SOIC package designation as a complete pinout. The supplied verified data does not identify the exact pins, power rails, reset connection, clock pins, ground pins, or analog assignments. Before schematic capture, compare the official manufacturer pin table against the PCB footprint and verify every net name; package compatibility alone does not prove pin-level compatibility.
The supplied excerpts do not specify the supply-voltage range, quiescent current, or current limits. Confirm those values in the manufacturer datasheet before selecting regulators, decoupling capacitors, or PCB power planes. Apply local high-frequency bypass close to the confirmed power pins and calculate regulator headroom for the actual 24 MHz operating condition and peripheral load.
For mixed-signal use, preserve the manufacturer's recommended analog, digital, and ground partitioning. Keep sensitive analog traces away from switching-node and high-current return paths, use a continuous ground reference where permitted, and place input filtering near the connector or sensor source. Exact pin and grounding guidance must come from the official datasheet because those details are absent from the supplied data.
Firmware capacity is a key design constraint because the verified flash size is only 2 KB. Estimate code size early, reserve space for startup and interrupt routines, and avoid relying on features that are not documented in the verified excerpts. If the application requires larger code storage or a larger pin package, use a redesign rather than assuming that a similarly named MCU is drop-in compatible.
コンプライアンス情報
The supplied verified data contains distributor and search snippets but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements.
